INSTRUCTIONS
VHF MOBILE TRANSCEIVER
IC -F5062
IC -F5062D
UHF MOBILE TRANSCEIVER
IC -F6062

Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product.
SAVE THESE INSTRUCTIONS — These instructions contain important operating instructions for the IC-F5062, IC-F5062D, and IC-F6062.
See the operating guide for details of the MDC, LTR®, and IDASTM and the BIIS (Binary Interchange of Information and Signaling) 1200 system operations. Ask your dealer for details.
Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of: ·

• Force majeure includes, but is not limited to, fires,
  earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination.

• The use of Icom transceivers with any equipment that is not manufactured or approved by Icom.

Icom, Icom Inc., and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. AMBE+2 is a trademark and property of Digital Voice Systems Inc.
LTR is a registered trademark of the E.F.Johnson Company.
All other products or brands are registered trademarks or trademarks of their respective holders.

INCM Inc.
1-1-32 Kamiminami, Hirano-ku,
Osaka 547-0003, Japan
Jan. 2022
A6566W-8EU-2
Printed in Japan
© 2019­2022 Icom Inc.

fire or electric shock.

ANTENNA

A key element in the performance of any communication system is the antenna. Contact your dealer for information regarding antennas and how to install them.

FUSE REPLACEMENT

A fuse is installed in the supplied DC power cable. If a fuse blows, track down the source of the problem, repair it, and then replace the damaged fuse with a new rated one.
L Fuse rating: 250 V 10 A
NOTE : Use only a 10 A fuse.

Fuse rating explanation
Fuse coding: FUSE 250 V 10 A
Fuse voltage rating: 250 Volts
Fuse current rating: 10 Amperes

CLEANING

If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth.

PRECAUTIONS

WARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock.
WARNING! NEVER operate the transceiver during a lightning storm. It may result in an electric shock, cause a fire or damage the transceiver. Always disconnect the power source and antenna before a storm.
WARNING! NEVER connect the transceiver to a power source of more than 16 V DC such as a 24 V battery. This could damage the transceiver.

WARNING! NEVER cut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the transceiver might be damaged.
WARNING! NEVER place the transceiver where normal operation of the vehicle may be hindered or where it could cause bodily injury.
CAUTION: DO NOT expose the transceiver to rain, snow or any liquids.
CAUTION: DO NOT use the non-specified microphone. Other microphones have different pin assignments and may damage the radio.
CAUTION: DO NOT place or leave the transceiver in areas with temperatures below –25°C or above +55°C, or in areas subject to direct sunlight, such as the dashboard.
CAUTION: DO NOT operate the transceiver without running the vehicle’s engine. The vehicle’s battery will quickly run out when the transceiver transmits while the vehicle’s engine is OFF.
CAUTION: DO NOT place or leave the transceiver in excessively dusty environments.
CAUTION: DO NOT place the transceiver against walls or put anything on top of the transceiver. Otherwise, heat dissipation will be obstructed.
CAUTION: DO NOT use harsh solvents such as Benzine or alcohol when cleaning, as they damage the transceiver’s surfaces.
CAUTION: CONFIRM that all connectors and jacks are dry and clean before attachment. Exposing them to dust or water will result in serious damage to the transceiver.
CAUTION: DO NOT operate the transceiver if it becomes hot after operating it continuously for long periods of time. This may damage the transceiver.
NEVER place the transceiver in an insecure place to avoid inadvertent use by unauthorized persons.

For European versions
CAUTION : Hot surfaces. DO NOT touch the transceiver’s surface after continuously transmitting for long periods of time. The transceiver’s chassis radiates heat, and it will become hot to protect the power amplifier unit from overheating. Touching it may cause a burn.

ABOUT CE AND DOC

Hereby, Icom Inc. declares that the versions of IC-F5062, IC-F5062D, and IC-F6062 which have the “CE” symbol on the product, comply with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.icomjapan.com/support/
About e-marking: Detailed installation notes for Icom mobile transceivers to be fitted into vehicles are available.
Please contact your Icom dealer or distributor.

DISPOSAL

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

FREQUENCY RANGE AND OUTPUT POWER

Model| Frequency
Range| Output Power
---|---|---
VHF Mobile Transceiver
IC-F5062/IC-F5062D| 136 – 174 MHz| 25 W
UHF Mobile Transceiver
IC-F6062| 400 – 470 MHz| 25 W

• Channel spacing: 6.25 kHz*, 12.5 kHz, 20 kHz, 25 kHz

• Only Digital mode

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from
attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Patent Nos. #8,595,002, #8,359,197, #8,315,860, #8,200,497,

7,970,606, #6,912,495 B2.

SUPPLIED ACCESSORIES*

1. Used for labeling the programmable function keys according to their assigned functions. *
2. Used for optional unit installation. Ask your dealer for details.

NOTE : Some accessories are not supplied, or the shape is different, depending on the transceiver version.

MOUNTING THE TRANSCEIVER

The universal mounting bracket supplied with your transceiver allows under or overhead mounting.
• Mount the transceiver securely with the 4 supplied screws to a thick surface that can support more than 1.5 kg.

OPTIONS

• RMK-3 separation kit + OPC-609 separation cable Allows you to install the transceiver main unit separately from the front panel for operating convenience.
• HM-152/HM-152T/HM-148G/HM-148T hand microphones
HM-152: Hand microphone
HM-152T: DTMF microphone
HM-148G: Self grounding heavy-duty microphone
HM-148T: Self-grounding heavy-duty microphone with 10-keypad
The 10-keypad of this microphone can be used for the DTMF code transmission only.
• SM-26 desktop microphone
• SP-30/SP-35/SP-35L external speakers Input impedance: 4 ø
SP-35/SP-35L: Rated input 5 W, Maximum input 7 W SP-30: Rated input 20 W, Maximum input 30 W
• UT-126H digital modulator/demodulator unit Enables 6.25 kHz digital mode operation.
Which unit to use depends on your transceiver version.
Ask your dealer for details.
Some options may not be available in some countries.
Please ask your dealer for details.

PANEL DESCRIPTION

D About the LED indicator
• Lights red while transmitting.
• Lights green while receiving a signal, or when the squelch is open.
About the Microphone connector Connect the supplied or optional microphone.
NEVER connect non-specified microphones. The pin assignments may be different and may damage the transceiver.

MICROPHONE
The supplied or optional microphone has a PTT switch and a hanger.
• The following functions are available when you put the microphone ON hook, or take it OFF hook (depending on the presetting):
– Automatic scan starts when you put it ON the hook.
– Scan is paused or canceled when you take it OFF hook.
– Automatically select the Priority channel when you take it OFF hook.
– Sets to the ‘Inaudible’ (mute) mode when you put it ON hook.
– Sets to the ‘Audible’ (unmute) mode when you take it OFF hook.

BASIC OPERATION

Turning power ON
Hold down [ ] to turn ON the power.
NOTE : If the transceiver is programmed for a start-up password, input the digit codes as directed by your dealer. See the operating guide for details.
Receiving and Transmitting
Receiving:

1. Select a channel.
   z Push [CH Up] or [CH Down].
   z Push one of the direct channel select keys, [MR-CH 1] to [MR-CH 4].

2. When receiving a call, rotate [VOL] to adjust the audio output level to a comfortable listening level.

Transmitting:
Wait until the channel is clear to avoid interference.

1. Take the microphone off the hook.
   • While scanning, the scan stops.

2. Wait for the channel to become clear.
   • The channel is busy when the LED indicator lights green.

3. While holding down [PTT], speak at a normal voice level.

4. Release [PTT] to receive.

IMPORTANT:
To maximize the readability of your signal:

1. After pushing [PTT], pause briefly before you start speaking.
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at a normal voice level.

REAR PANEL CONNECTION

For mobile operation

1 ANTENNA CONNECTOR
Connect to an antenna. Contact your dealer about antenna selection and placement.
2 EXTERNAL SPEAKER JACK
Connect a 4 ~ 8 Ω external speaker.  3 D-Sub 25-pin Connects to an external unit.
4 MICROPHONE HANGER
Connect the supplied microphone hanger to the vehicle’s ground for microphone ON/OFF hook functions. (See ‘PANEL DESCRIPTION’ for details.)
5 IGNITION LEAD
Connects to an ignition line.
CAUTION: DO NOT put pressure on this lead. Binding to the DC power cable is recommended.
6 DC POWER RECEPTACLE
Connects to a 12 V DC battery. Pay attention to polarities.
WARNING! NEVER connect to a 24 V battery. This will damage the transceiver.

FUNCTION DISPLAY

SIGNAL STRENGTH ICON
Displays relative receive signal strength level.

Weak Receive Signal level Strong
LOW POWER ICON
Displayed when low output power is selected.

AUDIBLE ICON
➥ Displayed when the channel is in the ‘Audible’
(unmute) mode.
➥ Displayed when a matching signal is received.

COMPANDER ICON
Displayed when the Compander function is activated.

SCRAMBLER ICON
Displayed when the Voice Scrambler function is activated.
BELL ICON
Displayed or blinks when a matching signal is received, according to the presetting.
CALL CODE MEMORY ICON
➥ Displayed when the call code memory is selected.
➥ Displayed when a phone call is received.*

SCROLL ICON
Displayed when an SDM (Short Data Message), including more than 12 characters, is selected in the received message selection mode 2 .
o MESSAGE ICON
Displayed when an SDM is received, or an SDM is selected for transmission 2 .
!0 ALPHANUMERIC DISPLAY
➥ Displays an operating channel number, channel name, Set mode contents, DTMF code, and so on.
➥ Depending on the presetting, characters are displayed in 1 line or 2 lines on the LCD.
• In the instruction manual, the LCD illustration is described as having characters displayed in 2 lines.
!1 ACTIVATED KEY ICON
Displayed above the key assigned as [Scan A Start/ Stop], [Scan B Start/Stop], [Scan Add/Del(Tag)], [Lock], [Talk Around], [Surveillance] or [BIIS button] 2 keys while that key is activated. 1  LTR ® operation only, * 2
operation only ee the operating guide for details of the MDC, LTR®, and IDAS™ and the BIIS (Binary Interchange of Information and Signaling) 1200 system operations. Ask your dealer for details.

For base station operation

1. ANTENNA CONNECTOR

2. EXTERNAL SPEAKER JACK
   Connect a 4 ~ 8 Ω external speaker.

3.  D-Sub 25-pin
   Connects to an external unit.

4. MICROPHONE HANGER
   Connect the supplied microphone hanger to the ground for microphone ON/OFF hook functions. (See ‘PANEL DESCRIPTION’ for details.)

5. IGNITION LEAD

6. DC POWER RECEPTACLE
   Connects to a 13.2 V DC power supply. Pay attention to polarities.
   Make sure the ground terminal of the DC power supply is grounded.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>