icom MBA1 Controller Metal Bracket Instruction Manual
- June 5, 2024
- ICOM
Table of Contents
MBA1 Controller Metal Bracket
Instruction Manual
Installing the Controller
The controller can be installed on the dashboard of a vehicle or console by
using the optional Controller bracket.
• Controller installation procedures
-
Place the controller bracket on a dashboard or console.
Place the MBF-1 holder. Refer to the MBF-1 installation manual.
MBF-1
(Optional) -
Attach the bracket to the Controller.
Tighten the screws to attach the bracket to the Controller.
(The screws are supplied with the MBA-1)
-
Connect the Controller to the bracket
There are 2 ways to mount the controller. Select the best way for your environment.
1. Insert
the MBA-1 guide to the MBF-1 bracket hook.
2. Tighten the nut.
3. Adjust the tilt with the adjust knob.
4. Insert
the MBA-1guide to the MBF-1 bracket hook.
5. Tighten the nut.
6. Adjust the angle, then tighten the adjusting knob. -
Cushion
If the Controller vibrates and hits to the dashboard or console when driving, use the cushion supplied with the Controller bracket.
When the Controller is fixed, tighten the adjustment knob while pressing it to the stuck cushion. The MBF-1 includes 2 sheets of cushions for each different thickness.
American Communication Systems
Discover the Power of Communications™