ICOM UT133 Bluetooth Communication Internal Board Installation Guide
- June 5, 2024
- ICOM
Table of Contents
ICOM UT133 Bluetooth Communication Internal Board
Before the installation:
Prepare 2 sponges that comes with the lIC-A120.
INSTALLATION
- Turn OFF the transceiver and disconect the DC power cable from the power supply.
- Remove the top cover.
- Remove the protect sheet from the Thin sponge, and then apply it to the PCB.
- Remove the protection sheet from the thick sponge, and then apply it to the U-133.
- Attach the UT-133 to the connector on the PCB
- Attach the top cover.
American Communication Systems
Discover the Power of Communications
http://www.ameradio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>