iCOM MB-130 Vehicle Charger Bracket Instructions

iCOM MB-130 Vehicle Charger Bracket Instructions

PRECAUTIONS

DO NOT use or place the vehicle charger bracket in direct sunlight, or in areas outside of the temperature range which is specified for the battery charger you will use.

DO NOT use harsh solvents such as benzine or alcohol to clean the vehicle charger bracket, because they can damage the bracket’s surfaces.

Securely connect the DC power cable or cigarette lighter cable before charging.

MOUNTABLE CHARGERS

(chargeable temperature range)

• BC-160 (CfC to 45°C; 32T to 113T)
• BC-190 (10’C to 40°C; 50T to 104T)
• BC-191 (10*C to 40°C; 50T to 104T)
• BC-192 (0°C to 45°C; 32T to 113°F)
• BC-193 (10°C to 40°C; 50T to 104T)

SUPPLIED ITEMS

Qty.

1. Self tapping screws (A04 x 20) 2
2. Spring washers (M4) 2
3. Flat washers (M4) 2
4. Set screws (M3 x 15) 2
5. Set screws (M3 x 20) 2
6. Elastic cord 1
7. Sponge 1

MOUNTING

1. Securely mount the vehicle charger bracket to a thick sur face, using the two A0 4 x 20 screws, spring washers and flat washers.

For Only the BC-160:
Attach the supplied sponge onto the bracket, as shown above.

2. D Attachthe supplied elastic cord.

   • See the back page for details.
   • Make sure to position the clip on the elastic cord so it will not touch the charger

3. Place the charger on the bracket.

4. Attach the charger with the supplied set screws.
   • For the BC-160, no screws are necessary to attach the charger.
   Go to the next step.
   • For the BC-190, use the M3 x 15 set screws.
   • For the BC-191, BC-192 or BC-193, use the M3 x 20 set screws.

5. Loosen the socket bolts on both sides of the bracket, then adjust the angle, if desired.

   • Use a 3 mm alien wrench. (Purchase locally.)
   • Tighten the bolts after adjusting.

6. Connect a DC power cable or cigarette lighter cable to the charger’s DC jack.

7. Charge a battery pack with or without a transceiver, as described in the transceiver’s instruction manual.

   • Hold down the transceiver or battery pack using the elastic cord, (see the back page.)
     

ELASTIC CORD ATTACHMENT

• BC-160 + IC-F3060/IC-F4060 series

• BC-190 + IC-F50/IC-F60 series
  

• BC-160 + IC-F3020/IC-F4020 series,
  IC-F33G/IC-F43G series,
  IC-F14/IC-F24 series

• BC-191/BC-192/BC-193 + IC-F3000/IC-F4000 series,
  IC-F3100/IC-F4100
  

About elastic cord:
While charging, put the tab under the hook to securely hold down the transceiver.

American Communication Systems
Discover the Power of Communications
http://www.ameradio.corn

Icom, Icom Inc.and the loom logoare registeredtrademarksofIcom Incorporated (Japan) inJapan, the United States, the United Kingdom, Ger many, France, Spain, Russia and/or other countries.

Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Count on us!
A-7015H-1 EX Printed in Japan
©2012 Icom Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>