chord CAA-15 Acoustic Amplifier User Manual

June 6, 2024
chord

chord CAA-15 Acoustic Amplifier logo chord CAA-15 Acoustic Amplifier Acoustic Amplifierchord CAA-15
Acoustic Amplifier fig 1

Item ref: 173.430UK User Manual

  1. Guitar input: connect guitar via 6.3mm mono jack
  2. BASS EQ control: boost or cut low frequencies
  3. MIDDLE EQ control: boost or cut middle frequencies
  4. TREBLE EQ control: boost or cut high frequencies
  5. CHORUS ON/OFF: switch to enable chorus effect
  6. CHORUS control :control depth of chorus effect
  7. VOLUME control: master output volume control
  8. MP3 IN: connect playback source via 3.5mm stereo jack
  9. PHONES: connect headphones via 6.3mm stereo jack (mutes speaker)
  10. Power indicator: LED illuminates when power is on
  11. POWER switch :mains power on/off

Operation

Connect guitar to input (1) via a 6.3mm jack lead If mp3 or other playback is to be used, connect this to the 3.5mm AUX IN connector (8) If headphones are to be used for silent practice, connect these to the 6.3mm PHONES jack (9) Turn the VOLUME control fully down and all other controls to the vertical (12 o’clock) position Connect to mains using the supplied mains lead via the rear panel IEC connector and switch POWER on (11) Gradually turn up the volume and play until sound is heard and increase to the required level djust BASS, MIDDLE and TREBLE controls to achieve the required tone character If “feedback” causes howling or squealing through the speaker, cutting certain EQ levels can help curtail this It is advised to position the guitar facing away from the CAA-15 and not too close in order to avoid feedback To give a special effect, the internal chorus can be engaged by pressing in the CHORUS ON/OFF switch (5) Depth of this effect can be adjusted with the CHORUS control (6) Turn down the VOLUME control before unplugging the guitar or switching off the CAA-15
Caution: Do not cover cooling vents at the rear of the amplifier. Keep away from damp or dusty environments Check mains lead is in good condition and ensure mains outlet voltage is correct as indicated.
Use only approved fuse rated as shown. Unplug from mains before replacing fuse. No user serviceable parts inside. Refer all servicing to qualified personnel

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted. Copyright© 2021. AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals