ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails User Manual

May 15, 2024
ingenuity

ingenuity logo

12412-MEES

ingenuity 12412-MEES InLighten Soothing Swing Twinkle
Tails

InLighten Soothing Swing™ – Twinkle Tails™

Swing

———————————————

ingenuitybaby.com

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from swings and have strangled in straps.

  • ALWAYS use the restraint system. Adjust to fit snugly.
  • STOP using product when infant attempts to climb out (approximately 9 months).
  • DO NOT use this product once your child can sit up unaided or weighs more than 9 kg/20 lbs. DO NOT use this product if your child weighs less than 3kg/6 lbs.
  • Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
  • NEVER let the child sleep in this product.
  • DO NOT move or lift this product with the baby inside it. Never lift product using a toy bar as a handle.
  • ALWAYS place product on floor. NEVER use this product on an elevated surface (e.g. a table).
  • NEVER attach any additional strings or straps to product or toy bar.

SUFFOCATION HAZARD: Young infants have limited head and neck control. If the seat is too upright, infant’s head can drop forward and compress the airway.

  • ALWAYS keep swing seat fully reclined until infant is at least 4 months old AND can hold up head without help.

SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces.

  • NEVER use on a bed, sofa, cushion, or other soft surface.

Prevent Serious Injury or Death

  • NEVER leave the child unattended.

  • To avoid injury ensure that children are kept away when unfolding and folding this product.

  • Do not let children play with this product.

  • When the product is connected to a music player, ensure that the volume of the music player is set to a low value.

  • When using the USB cord, only use the one supplied with this swing.

  • Check the USB cord and wall adaptor regularly for damage. Do not use if any damage has occurred.

  • Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

  • The product shall only be used with a transformer for toys.

  • The transformer is not a toy.

  • This product is only to be connected to equipment bearing either of the following symbols:
      Class III icon a2

  • Do not use extension cords.

CAUTION

  • This product contains small parts. Adult assembly required.

IMPORTANT

  • The provided USB cord is 183cm in length.
  • Please read all instructions before assembly and use of the product.
  • Care should be taken in unpacking and assembly.
  • Examine product frequently for damaged, missing, or loose parts.
  • DO NOT use if any parts are missing, damaged, or broken.
  • Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
  • This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning

Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
Bolster – Machine wash with cold water, gentle cycle. No bleach. Air dry flat.
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
Storage – When putting swing away for storage, always store in a dry location, away from any heat sources, and out of the sun.

No.

| Qty.| Parts List
---|---|---

Description

A

|

(2)

| M5 Philips Head Screws

B

|

(2)

| M5 Nuts

1

|

(1)

| Swing Control with Left Mid Tube

2

|

(1)

| Right Mid Tube

3

|

(1)

| Right Upright Foot with Wheel

4

|

(1)

| Left Upright Foot with Wheel

5

|

(1)

| Right Base Frame Leg

6

|

(1)

| Left Base Frame Leg

7

|

(1)

| Lower Swing Arm Assembly

8

|

(1)

| Cross Brace Assembly

9

|

(1)

| Left recline mechanism

10

|

(1)

| Right recline mechanism

11

|

(1)

| Foot rest Tube

12

|

(1)

| Back rest tube

13

|

(1)

| Seat Pad

14

|

(1)

| Bolster

15

|

(1)

| Mobile with toys

16

|

(1)

| USB A Cable

not included

Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
a4

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b1

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b2

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b3

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b4

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b5

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails
-b6

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b7

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b8

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b9

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b10

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b11

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b12

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b13

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b14

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
b15

Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

Using the Seat Restraint

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
c1

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
c2

ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
c4 ingenuity 12412-MEES
InLighten Soothing Swing Twinkle Tails - c5 ingenuity 12412-MEES InLighten Soothing Swing Twinkle Tails -
c6

Audio Input

When the product is connected to a music player, ensure that the volume of the music player is set to a low value.

Using the Recline Function
Storage and Travel
Using the Swing Control Module
  1. Swing Timer Select Button and Indicator
  2. Mobile Motion
  3. Lights
  4. Nature Sounds/Music
  5. Volume Control
  6. Power Switch
  7. Speed Selector Button and Indicator

Slide the Power switch to power the Swing Control Module.

The Speed Selector function provides 6 speed settings and OFF. The LEDs operate sequentially and in bar graph mode. To start the swing function, press the button until the flashing LED bar graph displays the desired setting. Then gently push the seat (within 15 seconds) to activate the swing motion. After five seconds a single LED will indicate the selected speed.

When you change the speed setting during swing motion, the LED bar graph will flash for five seconds during the speed adjustment. When the swing timer expires, the swing stops and the Speed Selector and Timer LEDs turn OFF.

Use the Swing Timer Select function to turn OFF the swing automatically. Press the button to sequence to the desired timer setting of 30, 45, or 60 minutes. The three LEDs above the button indicate the selected time period. If you do not select a timer setting (all LEDs are OFF), the unit uses a default time of 90 minutes for auto-shutoff. To use the swing function after auto-shutoff, either OK, press the Swing Timer Select button or the Speed Selector button.

Press the Nature Sounds/Music button to begin music and nature sounds playback. Press as needed to select the desired nature sound or song. Auto- shutoff occurs after about 20 minutes.

Push the Volume Control switch as needed to turn off or adjust the volume for music and nature sounds.

When the product is connected to a music player, ensure that the volume on the music player is set to a low volume.

Press the Mobile Motion button to start the mobile.

Press the Lights button to switch on the lights. Press it again to get into a random light/play pattern.

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

ingenuity logo

Find us on Facebook and Instagram @ingenuitybaby

Toys • Activity Gyms • Bouncers • Rockers • Swings • Bassinets • Playards • High chairs • Booster Seats

ingenuitybaby.com


MANUFACTURED FOR • ©2023 KIDS2, INC. www.kids2.com/help
KIDS2, INC. ATLANTA, GA USA 30305 • 1-800-230-8190
IMPORTED BY
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 SHANGHAI LIMITED Room7401, Shanghai Tower, No.479 Lujiazui Ring Road , Pudong New Area, Shanghai 200120 •+86 21 31025990
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON, BEDFORDSHIRE, UK, LU1 3LU • +44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA

EN • ES • FR • DE • PT • IT • 12412_6MEES_USB_IS020423

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals