bright starts 60135-ES Playful Pinwheels Bouncer Instruction Manual
- June 1, 2024
- bright starts
Table of Contents
bright starts 60135-ES Playful Pinwheels Bouncer
Safety Instructions
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING
FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers when not used properly.
- NEVER leave the child unattended.
- Use bouncer ONLY on the floor.
- NEVER use on an elevated surface. Only use on the floor.
- NEVER lift or carry baby in bouncer.
- NEVER lift bouncer using a toy bar as a handle.
SUFFOCATION HAZARD: Babies have suffocated when bouncers tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
- NEVER use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
TO PREVENT FALLS AND SUFFOCATION:
- ALWAYS use restraints and adjust to fit snugly.
- STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
- Never let the child sleep in this product.
- NEVER use as an infant carrier for automobile or airline travel.
- NEVER attach any additional strings or straps to product or toy bar.
IMPORTANT
- Adult assembly required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
- This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning
- Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
- Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Frame – Wipe the metal frame with soft, clean cloth and mild soap.
Battery Information
The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes: • Always keep batteries away from children.
- Never mix old and new batteries, or batteries of different brands or types.
- Always replace the entire set of batteries at one time.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment. • Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Dispose of used batteries immediately.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
Parts List and Drawing
| No | Qty | Description |
|---|---|---|
| 1 | (1) | Base frame tube |
| 2 | (1) | Left base frame member |
| 3 | (1) | Right base frame member |
| 4 | (1) | Left backrest tube |
| 5 | (1) | Right backrest tube |
| 6 | (1) | Footrest wire |
| 7 | (1) | Vibration unit |
| 8 | (1) | Seat pad |
| 9 | (1) | Toy bar with toys |
Installation Instructions
Using the Seat Restraint
Vibration calms and soothes the baby.
To use the vibration function:
Slide the Vibration ON/OFF switch to the ON or OFF position.
Storage and Travel
To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside of each connecting hub on the bouncer. Remove the footrest tube and base frame tubes from each connecting hub.
Customer Support
Find us on Facebook and Instagram @brightstarts
Toys • Activity Gyms • Bouncers • Rockers • Swings Activity Centers • Walkers • Door Jumpers
MANUFACTURED FOR 
©2023 KIDS2, INC. www.kids2.com/help
KIDS2, INC. ATLANTA, GA USA 30305 •
1-800-230-8190
IMPORTED BY KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 •
(02) 9894-1855
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku,
Tokyo, Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY,
HEMEL HEMPSTEAD, HP2 4TZ • +44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM,
NETHERLANDS• +31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA
Documents / Resources
|
bright starts 60135-ES Playful Pinwheels
Bouncer
[pdf] Instruction Manual
60135-ES Playful Pinwheels Bouncer, 60135-ES, Playful Pinwheels Bouncer,
Pinwheels Bouncer, Bouncer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>