NightSearcher 98405020 NEXSUN-1200 Solar Powered LED Area Light User Manual

Night Searcher 98405020 NEXSUN-1200 Solar Powered LED Area Light

Contents:

• Lamp
• Pole fixings
• Wall fixings
• Remote controller
• User Manual

Specification

Installation

• Install in a location where the solar panel will receive direct sunlight and not blocked or covered by buildings, trees or other structures that would prevent the solar panel from charging sufficiently.
• Choose installation methods as desired (installing to a wall or pole as required).
• Recommendation Installation height: 3.5-4.5m. Pole diameter: 70-100mm Distance between lamps: 10-15m.
• Activate the solar lamp to the light mode you require before continuing (see Operational Instructions).
• Please ensure installation kits are tightened firmly.
• Charging time: 6 hours

Install to a wall

1. Mark out the required holes needed to mount the lamp.
2.  Drill suitable holes and insert wall plugs either supplied of suitable substitutes.
3. Position the lamp and secure into place with supplied or other suitable fixing’s.

Operation

Dusk to Dawn:
This solar light will automatically come on at dusk, and turn off during the daytime.

Movement activated (PIR)
The LED light will operate when motion is detected near the light. Please note that the lamp needs to be turned on using the provided remote control. PIR distance: 6-12m/140°

How to use the remote control
Press Red power button: To turn the lamp on/off the additional buttons control and change the light level and timer modes.

M1, M2, M3: working modes

1. M1: If no motion is detected, the light will power at dimmed level for up to 8 hours in total. If motion
   is detected, the light will switch to full power for you selected time (Exact timing length of high brightness will depend on which time mode you have chosen: T1, T2, or T3).

2. M2 : If no motion is detected the light will remain off. Once motion is detected: light will illuminate to full brightness for you selected time (Exact timing length of high brightness will depend on which time mode you have chosen: T1, T2, or T3).

3. M3: Light is powered in low mode from dusk, until battery is depleted of dawn.

Safe disposal of waste electrical products:
If at any time, you need to dispose of this product or parts of this product: please note
that waste electrical products, should not be disposed of with ordinary household waste. Recycle where facilities exist. Check with your local authority for recycling advice.  Alternatively, Night Searcher is happy to take receipt of this product at end-of-life  and will recycle it on your behalf.

Guarantee Terms
All Night Searcher products have a 3-year standard warranty on all manufacturing defects from the date of purchase. Extended Warranty: Customers have the option to extend the warranty of the product to 5 years for manufacturing defects. Registration of the product must be made within one month of purchase by sending us an email sales@ nightsearcher.co.uk. In the message please state in your own words that you would like to register your Night Searcher product for the extended warranty.
To view Night Searcher’s warranty policy, please visit:
http://nightsearcher.com/en/warranty.html or scan the QR code.

Night Searcher Limited:

Unit 4 Applied House Fitzherbert Spur Farlington PORTSMOUTH Hampshire, UK
PO6 1TT
www.nightsearcher.co.uk
Tel: (0)23 9238 9774.

References

• Leaders in LED Lighting Solutions | NightSearcher
• Warranty
• Leaders in LED Lighting Solutions | NightSearcher
• Solar Lights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>