NightSearcher SIGMA ATEX 3C Head Torch User Manual

SIGMA ATEX 3C Head Torch
User Manual

SIGMA ATEX 3C Head Torch

CERTIFICATION

UL| CLASS I DIV I&2 GRP ABCD
CLASS II DIV I&2 GRP EFG
CLASS III TEMP CODE: T4
FILE NUMBER E324236
ATEX| II 1 G Ex is IIC T4
DEMKO 13 ATEX 1112940X
IECEx| Ex is IIC T4 Ga
IECEx UL 13.0008X
REACH| Approved
RoHS| Approved
CE| Approved

Operation

• Press once to turn the flashlight on, full power.
• Press twice to dim down the light output.
• Press a third time to turn the flashlight off.

Battery Installation

Warning – Replace batteries only in non hazardous areas.

• Unscrew the bezel retaining screw and take off the black cap, do not directly touch inside the heat sink set, it might be hot after continuous use.
• Remove the cap, remove the reflector with the LED inserted, do not touch the inner surface of the reflector, it might affect the performance of lighting.
• Insert 3 pieces of C type batteries identical, with the positive (+) pole in an upward direction, then re-insert reflector by ensuring the groove is in the correct position.
• Fill new batteries according to the (+) positive and (-) negative marks inside the flashlight barrel.
• Then replace the bezel by slowly turning until the broad ridge is in line with the screw. Then lock in position by tightening the screw. If the flashlight is not used or stored for a long time, batteries should be removed to avoid battery leaking which may damage the flashlight.
• Always replace all the batteries at the same time.
• ONLY USE THESE BATTERIES : Energizer E93, Duracell MN1400, Rayovac 814 or Varta 04914
• Do not mix used batteries with new batterie
• Do not mix batteries from different manufacturers

General Warning

• Do not expose the battery to excessive heat, to do so may cause an explosion. – Do not use metal objects to short circuit the positive and negative end of the battery.

• Do not dispose of the battery in the domestic waste, please use the correct method of disposal. – Do not solder directly on to the battery. – Do not let the battery become
  wet or immerse the battery in water.

• Keep the battery away from children. – The operating temperature range of the flashlight’s battery: Charging: 0°C to 45°C / Discharging: -20°C to 60°C

• Do not shine the flashlight directly into people’s eyes, as it may damage their eyesight.

• Do not try to repair the unit. In case of any problems or questions please contact NightSearcher Limited or an authorised distributor.

Safe disposal of waste electrical products, batteries
If at any time, you need to dispose of this product or parts of this product: please note that waste electrical products, batteries should not be disposed of with ordinary household waste. Recycle where facilities exist. Check with your local authority for recycling advice. Alternatively, NightSearcher is happy to take receipt of this product at end-of-life and will recycle it on your behalf.

GUARANTEE TERMS

All NightSearcher products have a 3-year standard warranty on all manufacturing defects and 1-year warranty on all rechargeable batteries from the date of purchase.
Extended Warranty: Customers have the option to extend the warranty of the product to 5 years for manufacturing defects.
Registration of the product must be made within one month of purchase by sending us an email sales@nightsearcher.co.uk. In the message please state in your own words that you would like to register your NightSearcher product for the extended warranty.
To view NightSearcher’s warranty policy, please visit: http://nightsearcher.com/en/warranty.html or scan the QR code.

http://nightsearcher.co.uk/en/warranty.html

NightSearcher Limited
Unit 4 Applied House
Fitzherbert Spur
Farlington – PORTSMOUTH
Hampshire – PO6 1TT – UK

References

• Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>