Rosewill RBWC-20030 Dual Wireless Fast Charge Stand Instruction Manual

Rosewill RBWC-20030 Dual Wireless Fast Charge Stand

This charger is designed to quickly and easily charge your smart phone or Qi compatible device.

CONNECTING TO A USB-C CHARGER

1. Plug in your USB charger.
   (The USB charger is sold separately)

2. Plug the USB cable into the charger.

3. Connect the cable to the Wireless Charging Stand.

Note:

• The Wireless Charging Stand features intelligent power control, and can be safely stay in standby mode.
• Suggest to use PD Charger 18 W or above.

CHARGING WITH YOUR LAPTOP

1. Plug the USB-C cable into your laptop’s USB-C port and the other USB-C end into the Wireless Charging Stand.
2. The LED status indicator turns white when the charger is in Standby mode, and the charger will automatically turn off after 3 seconds. The indicator will stay on when the device is charging.

CHARGING WITH YOUR COMPUTER

1. Plug the USB cable into your computer’s USB-C port and the other USB-C end into the Wireless Charging Stand.
2. The LED status indicator turns white when the charger is in Standby mode, and the charger will automatically turn off after 3 seconds. The indicator will stay on when the device is charging.

CHARGING YOUR DEVICES

If the device is placed incorrectly, the LED status indicator will start to flash – if this happens, adjust the position of the device until the LED status indicator stops flashing.

2 mobile phones or 1 mobile phone and 1 set of earbuds can be charged simultaneously.

Safety

1. Do not disassemble the charger or discard in a fire. Keep away from water and moisture as this can cause a short circuit.
2. Avoid dropping or damaging the charger – if the unit is damaged please discontinue use.
3. Do not use in excessively hot, humid or corrosive environments.
4. Do not place too close to credit cards or ID cards with magnetic strips to avoid damage to your cards or the charger.
5. Please keep at least 7.9 in (20 cm) distance between this device and medical devices such as pacemakers or cochlear implants, to avoid potential interference.
6. Please keep away from children.

The images in this manual are for illustration purposes only, and may differ from the final design.

SPECIFICATIONS

• Type-C Input: 5V/14.5V/20V 3A{Max)
• Type-C Output: 5V/1A(Max 5W)
• Wireless Output: 5V/1A(5W), 5V/1.5A(7.5W), 9V/1.1A(Max 10W)
• Frequency: 11 O – 205 KHz
• Conversion: > 72 %
• Dimensions: 4.6 x 3.4 x 2.4 in (117 x 86 x 60 mm)

PACKAGE CONTENT

• Wireless Charging Stand
• x1 USB-C to USB-C Cable
• x1 USB-A to USB-C Cable
• User Manual

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to minimize the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Technical Support Information
techsupport@rosewilf.com
1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>