Rosewill RHUB-20006 USB-C 11-Port Docking Station Monitor Stand USB C Hub Instruction Manual

Rosewill RHUB-20006 USB-C 11-Port Docking Station Monitor Stand USB C Hub

Design and specifications are subject to change without notice for improvement. Company names and product names mentioned in this document are trademarks or registered trademarks of the respective companies/ entities.

PRECAUTIONS FOR SAFE USE

Warning: To avoid hazards that may result in death or serious injuries, follow the instruction below carefully.

• Do not disassemble or modify the product.
• Do not expose the product to water or other liquids. Do not touch this product or cables with wet hands.
• If you notice unexpected odor or smoke, discontinue use of the product.
• Do not stack the product on top of each other or place heavy objects on the products.
• Make sure no foreign objects such as liquid or metal get inside the product.
• Keep away from children.
• To avoid overheat or ignition, do not use the product with the cable bundled up.

Attention: To avoid personal injuries or property damage, follow the instructions carefully.

• Be careful when installing and removing. (It may cause equipment failure)
• Do not use in the following environments where safe functioning of the product may be affected.
  • (1) Direct sunlight. (2) Humid or damp place. (3) Unstable surface. (4) Place where static electricity is generated. (5) Environment that is improper for the normal household or office application.
• The product may get hot after a long-time usage. Handle with care to avoid burns.
• Handle with care.

1. Disconnect this product from your device such as a computer before cleaning.
2. Clean the product with a soft cloth.
3. Do not use benzine to clean the product.

HANDLING PRECAUTIONS

• To avoid loss of data, make sure all the data have been saved on your computer before disconnecting the product.
• DO NOT disconnect this product or remove the SD/TF cards during read/ write of data. Always disconnect/eject the peripherals such as SD cards in accordance with the requirements of your computer system and the related hardware.
• The seller/manufacturer shall not be held responsible for any loss of data associated with use of this product for any reason whatsoever.

FEATURES

• This product allows you to connect your device to HDMI display, VGA display, USB devices, SD/TF card with one USB-C cable.
• The HDMI and VGA ports allow you to expand your display in two ways: Extend and Mirror without the need to install any software.
• With power input (max 1 DOW) via the PD port, you can charge your device (such as a laptop) and other devices/peripherals such as smartphones and other USS-enabled devices.

PHYSICAL CONDITIONS OF THE DEVICE TO BE PLACED

Maximum weight capacity
Do not place any device larger than the mounting surface of 11.8 x 8.5 in or weighing over 22 lbs (10 kg) on top of the product.

Installation conditions
This product shall be placed on a smooth and level area that is no less than 11.8 x 8.5 in.

FUNCTIONS OF THE PARTS

PREPARATION BEFORE USE

1. Peel off the protective tape on the anti-skid strips
2. Take out the cable from the cable holder
3. Place an all-in-one computer or monitor on top of the product Turn on the power of the connected computer.
4. Connect the USB Type-C cable of this product to the USB Type-C port of your computer. Insert it all the way in.
5. No drive software installation is needed

For Monitor

• Connect the cable to the USB-C port on your host device and connect the monitor to this product with a proper cable via the VGA or HDMI port.

For All-In-One computer

• Connect the computer to this product with the cable
• The LED lights up in blue and you can now start your work

HOW TO USE

Connect to USB-A enabled devices
The USB 3.0 Gen1 ports of this product can be used to connect USB-A devices (not included in the package).

High power consumption may not be supported

Connect to USB-C enabled devices
The USB-C ports on the front side can be used to connect to USB-C enabled peripherals/devices such as flash drives, keyboards, etc.

High power consumption may not be supported

Insert SD card microSD card

Insert SD card

Insert microSD card

Connect to a headset / speaker

Connect a headset I speaker (sold separately} to the 3.5mm 4-pole stereo port of this product.

Connect to HDMI/VGA devices

Connect to HDMI device
Connect the HDMI port on the back side to an HDMI enabled display device/monitor.

Connect to VGA device
Connect the VGA port on the back side to an VGA enabled display device/ monitor.

Charge your notebook

The USB-C port on the back side supports USB PD (Power Delivery).You can charge your notebook computer by connecting to this port

DEVICE AND OS COMPATIBILITY

Compatible models

• Windows installed computers
• Apple Mac Series
• To operate in the environment of USB 3.0 Gen1, a USB-A 3.0 Gen1 port is required on the host device.
• Some products may not be compatible with some USB devices.
• Be sure to connect a genuine power adapter for power input.

Supported Operating System

• Windows 10
• Mac OS 10.12 -10.15

SPECIFICATIONS

USB HUB

Interface standard| USB 3·0Gen 1

Backward compatibility : USB 2.0

---|---
Data transfer speed| 5 Gbps / 480 Mbps / 12 Mbps / 1.5 Mbps (theoretical value)

Connection

| USB 3.0 Gen1Port x3 (Downstream) USB Type-C Port x2 (Downstream)

USB Type-C port x1 (PD 3.0 100W for charging only)

Power supply

| Power input via the PD-compatible USB-C port (100W)
Supply current| Maximum 830 mA (total of all ports)

HDMI port, VGA port

Connection

| HDMI (19 pin) Female x1 (Max 4K 30Hz) HDCP 1.4 compatible

VGA (O-Sub 15pin) Female x1 (Max 1920 x 1200 60Hz)

---|---

Card reader slots

Audio port

General specifications

Current consumption| ****

Up to 900 mA

---|---

Size / Weight

| W11.8 x D8.5 x H1.7 in / 1.8 pounds approx. Cable length: 23.6 in Approx.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>