Rosewill RBWC-20030 Wireless Charger Stand User Guide

Rosewill RBWC-20030 Wireless Charger Stand

This charger is designed to quickly and easily charge your smartphone or Qi- compatible device.

CONNECTING TO A USB-C CHARGER

1. Plug-In your USB charger. (The USB charger le 8okd separately)
2. Plug the USB cable into the charger.
3. Connect the cable to the Wireless Charging Stand.
   Note The Wireless Charging Stand features intelligent power control, and can safely stay in standby mode
   Suggest to use PD Charger 18W or above.

CHARGING WITH YOUR LAPTOP

1. Plug the USB-C cable inho your laptop’s USB-C port and the other USB-C end into the Wireless Charging Stand.
2. The LED sletus indicator turms white when the cherger is in Stendby mode, and the charger will automatically tum off after 3 seconds. The indicator will stay on when the device is charging.

CHARGING WITH YOUR COMPUTER

1. Plug the USB cable into your computer’s USB-C port and the other USB-C end into the Wireless Charging Stand.
2. The LED status indicator turns white when the charger is in Standby mode, and the charger will automatically tum off after 3 seconds. The indicator will stay on when the davice is cherging.

CHARGING YOUR DEVICES

1. If the device is placed incorrectly, the LED status indicator will start to fash-if this happens, adjust the position of the device urtil the LED status indicator stops flashing.
2. 2 mobile phones or 1 mobile phone and 1 set of earbuds can be oharged simultaneously.

Safety

1. Do not disassemble the charger or discard In a fire. Keep away from water and moisture as this can cause a short circuit.
2. Avoid dropping or damaging the charger-if the unit is damaged please discontinue use.
3. Do not use in excessively hot, humid or corrosive environments.
4. Do not place too close to credit cards or ID cards with magnetic strips to avoid damage to your cards or the charger.
5. Please keep at least 7.9 in (20 cm) distance between this device and medical devices such as pacemakers or cochlear implants, to avoid potential interference.
6. Please keep away from children. The Images In this manual are tor Illustration purposes only and may differ from the final design.

SPECIFICATIONS

1. Type-C Inpun: 5V/14.5V/20V 3AMax)
2. Type-C Output: 5V/1AMax 5w)
3. Wireless Output: 5V/1A(5W), sV/1.5A7.5w), av/1.1AMax 10)
4. Frequency: 110-205 KHz
5. Conversion: >72%
6. Dimensions: 4.8 x3.4 x 2.4 in (117 x 88 x 60 mm)

PACKAGE CONTENT

1. Wireless Charglng Stand
2. x1 USB-Cto USB-C Cable
3. x1 USB-A to USB-C Cable

FCC STATEMENT

This device complies with part 15 and part 18 of the PCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 and part 18 of the PCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferenče by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfül interference to radio communications. If this equipment does cause harmfül interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>