Rosewill RW-TH68N Bluetooth Headphones Instruction Manual

Rosewill RW-TH68N Bluetooth Headphones

Thank you for purchasing a Rosewill Bluetooth Headphones.
Please read the instruction manual before use and retain it for future reference.

CAUTION

• Please charge the battery if you can not turn on the headphones
• Please turn off the headphones after use to maintain a longer battery life
• Please use the USB cable included in the package for battery charging
• Please do not change any other battery
• Please do not keep headphones in a wet environment
• Do not expose or toss headphones into the fire
• Please do not try to disassemble the headphones

PRODUCT OVERVIEW

1. Next track/Volume up
2. Previous track/Volume down
3. MFB button
4. USB charging port
5. Bluetooth indicator
6. Noise-canceling button
7. Noise-canceling indicator
8. 3.5 mm jack

INSTRUCTIONS

Battery Charging

• Battery: Rechargeable Polymer Lithium-Ion Battery {DC: 3.?V/290 mAh).
• Power: Please use the USB DC5V cable included in the package for charging.
• Charging Time: When charging for the first time, please be sure the battery is charged for more than 4 hours to be fully charged. After the first time, the charging time is about 3 hours.
• When the red light is on, the headphones are in charge mode. The red light will turn off when the battery is fully charged.

Noise Cancellation Function

When you slide the NC button to the ON {the red mark) side, the indicator will turn on, then you can enjoy the headphones in Noise Cancellation mode. When you do not need the Noise Cancellation function, slide the NC button to the OFF side.

Pairing Headphones with Bluetooth Devices

• Turn the headphones on by holding down the MFB button until you hear the voice say “ON”. To turn it off, hold down the same button until you hear the voice say “OFF”.
• Please keep the headphones and mobile phone in the range of 1 meter when pairing and make sure your headphones are off.
• Press and hold the MFB button for 5 seconds to put the headphones in paring mode {if successful the LED light will flash red and blue).
• Go into the Bluetooth settings on your device, search for new Bluetooth devices, and select RW-TH68N.
• The LED light will blink blue when the headphones are successfully paired.

Notes: If the pairing is not successful, please turn the headphones off and on, then try to pair again.

Making Calls with the Headphones

Reject call

| ****

Ringing

| Press and hold the MFB button for one second, then release it when you hear the indication sound

Transfer the call between

headphones and Bluetooth device

| ****

Conversation mode

| Press and hold the MFB button for 3 seconds to transfer the conversation from headphones to mobile phones. Then press and hold the MFB button

for 3 seconds to transfer the conversation back from the mobile phone to headphones.

Notes

• Not all mobile phones support every function listed above. Please refer to the instructions on your mobile phone.
• Some functions and indication tones may vary with mobile phones.

Playing Music

• When the headphones connect with the mobile phone or Bluetooth transmitter, you can enjoy music through headphones wirelessly.

SPECIFICATIONS

• Bluetooth Solution: CSR 8635
• Bluetooth Version: V5.0
• Support Agreement: A2DP, AVRCP, HFP, HSP
• Operating distance: 10 m
• Battery: 290 mAh
• Charging Time: about 3 hrs
• Charging Current: 170 mA
• Music Playing Time: 16 hrs (50% volume)
• Talking Time: 18 hrs (50% volume)
• Driver Unit: 40 mm
• Sensitivity: 105 dB/1 mW (SPL at 1 kHz)
• Impedance: 320
• Frequency Range: 20 Hz-20 kHz

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure condition without restriction.

Technical Support Information

• techsupport@rosewill.com
• TEL: 1-800-575-9885

Please register your product at www.rosewill.com for complete warranty information and support for the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>