BRIGHT 016318 Massage Cushion For The Neck/Back Instruction Manual
- June 6, 2024
- Bright
Table of Contents
BRIGHT 016318 Massage Cushion For The Neck/Back
SAFETY INSTRUCTIONS
Follow the safety precautions when using electrical appliances to reduce the risk of fire, electric shock and/or personal injury.
WORK AREA
- Read these instructions carefully and save them for future reference.
- Do not allow children to use the product.
- Keep this product out of the reach of children.
- Do not use the product when driving a car or other vehicle.
- Do not use the product if you are pregnant.
- Do not use the product if you are sensitive to heat or suffer from circulatory disturbance, varicose veins, muscular or tissue inflammation, or vein inflammation.
- Do not use the product on damaged skin, bruising, sores or other injuries.
- Stop using the product immediately and seek medical attention if you experience pain or discomfort during the massage.
- Do not use the product if you have a pacemaker, joint implant or electronic implant.
- Do not use product together with skin lotion, oil etc.
- Switch off the product and pull out the plug after use.
- Never use the product if you are tired. Avoid falling asleep during use.
- Do not carry or pull the product by the power cord.
- Pull out the plug before cleaning.
- Clean the product with a cloth moistened with water and wipe dry immediately.
- Do not plug in the plug until the product is completely dry.
- Never use the product under a quilt, blanket or cushion. The product can overheat – risk of fire, electric shock and/or personal injury.
- Do not use the product in high relative humidity, or near water or any other liquid. Do not use or handle the product with wet hands or other wet parts of the body.
- Do not expose the product to water or any other liquid.
- The product is only intended for household use.
- Commercial or professional use will invalidate the warranty. The manufacturer cannot accept liability for any damages resulting from improper usage.
- Never leave the product unattended when plugged in.
- Place the power cord so that there is no risk of tripping over it.
- Do not allow the power cord to come into contact with hot surfaces.
- Do not use the product if the power cord or plug are damaged, or not working properly.
- Check the power cord and the plug regularly. A damaged cord or plug must be replaced by an authorised service centre or other qualified personnel to ensure safe use.
- Service and/or repairs must be carried out by qualified service personnel using approved spare parts.
- Stop using the product immediately and pull out the plug if the product is not working properly.
- Never attempt to open or examine the product by yourself.
- Keep the packaging material out of the reach of children – risk of suffocation.
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local – regulations.
| Protection
class II
TECHNICAL DATA
| Rated voltage | 230 V ~ 50 Hz |
|---|---|
| Secondary voltage | 12 V DC |
| Output | 24W |
DESCRIPTION
- Adjusting the direction of the massage
- Power switch to start and switch off the product
- Starting and switching off the heat function
- Adjusting the massage speed (the product has 3 different speeds).
- Massage unit
- DC connection
- Plug
- Power cord
- Plug for AC connection
- Cord for connection to 12 V vehicle socket
HOW TO USE
-
Connect the power cord to the product.
-
Plug the plug into the mains.
-
Start the product with the power switch.
-
Use the buttons to set the required function.
-
Adjust the massage pressure so that it feels comfortable. Do not use excessive pressure.
For suitable applications, see -
Switch off the product, pull outthe plug, and put the product away after use. The product switches off automatically after 15 minutes.
Do not use the product immediately before going to bed. Massage has a stimulating effect, which can make it difficult to go to sleep.
MAINTENANCE
- Clean the product with a cloth moistened with water and wipe dry immediately.
- Do not plug in the plug until the product is completely dry.
TROUBLESHOOTING
| Problem | Action |
|---|---|
| The product will not start | Check that the plug is plugged in. |
Check that the power switch is in the ON position.
The product switches off when in use.| The product switches off automatically
after 15 minutes.
Check if the plug has been unplugged.
Check if the power cord, plug or power point are damaged.
In which case, stop using the product immediately and pull out the plug.
If the above measures do not solve the problem the product can have been
switched off by the overheating protection. Pull out the plug and allow the
product to cool for at least one hour.
Contact the retailer if the problem persists. Do not use the product before it
has been checked and where appropriate repaired by qualified personnel.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>