immax Neo Lite Smart Christmas Lights User Manual
- June 6, 2024
- immax
Table of Contents
immax Neo Lite Smart Christmas Lights
TECHNICAL SPECIFICATIONS
- Protocol: Wi-Fi
- Frequency: 2400MHz~2483.5MHz
- Maximum RF output power: 20dBm
INSTALLATION
- Use the power adapter with DC12/24V of output voltage only.
- Install the controller correctly, use 3M tape to fix it.
- Please unfold the LED strip to avoid the overheat issues. Please connect the cables of LED strip with the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, go to next step.
- Check and ensure the power supply, controller and LED strip are connected correctly
ATTENTIONS
- Do not put any metal around the controller, which could blocked WiFi signal.
- Ensure the power supply and controller are connected correctly.
- The power supply output voltage should be same as LED strip working voltage.
- Do not cover anything on the surface of power supply, controller and LED strip.
- Ensure the connection is correct before powering
PRODUCT FUNCTIONS DIAGRAM
DOWNLOAD AND REGISTRATION
Scan the QC Code to download “ Smart Life” APP. Or Search“Smart Life”in App
store or Google Play to install the APP. Open the “ Smart Life” APP, tap
“Register”- to get an account with your phone number or E-mail. Sign in the
APP.
APP CONNECTION
Preparation jobs: Power on the LED strip and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI.
Solution 1
Reset the LED chain – long press the L button on the controller for more than
10 seconds. The WiFi LED on the controller will flash red quickly. Find the
“+”(in the corresponding room of the APP) to add devices. If your mobile have
already turned on bluetooth before connecting the LED strip, then no need to
turn on bluetooth again, the APP will connect to the LED strip automatically.
If your mobile didn’t turn on bluetooh before connecting the LED strip, the
APP will pop up an interface with tips to ask you to turn on bluetooth. Then
please choose “Allow”, then the bluetooth function of your mobile will be
turned on. After that, the APP will pop up tips with info of the LED strips,
then choose “Go to add”. Will go into an interface of bluetooth device, choose
the “+” and go into next interface(Enter Wi-Fi password). Input the password
of the WIFI and choose “Confirm”, then it will go into status of
“Connecting……”, you will need to await for your mobile to pairing with the
controller at this step. Choose “Done” when it shows “Added successfully”,
then go into operation modes. (If solution 1 is not suitable with your
devices, please refer to solution 2)
Solution 2)
Reset the LED chain – long press the L button on the controller for more than
10 seconds. The WiFi LED on the controller will flash red quickly. Find the
“+”(in the corresponding room of the APP) into interface of “Add manually”.
Then choose “lighting” to choose the correct smart devices and go into
interface of “Select 2.4 GHz Wi-Fi Network and enter password”. Enter the Wi-
Fi password, then choose “Next” and waiting until pairing success(- make sure
your mobile and the smart devices are in the same Wi-Fi networks). Then go
into the interface of “Scanning devices”, after scanning success and choose
“Next”, it will pop up interface of “add successfully” and choose “Done” to go
into the operation modes.
APPLICATION
n Immax NEO PRO you can turn the LED chain on and off or control preset programs and the timer.
PROGRAMS
You can choose from these 18 preset programs: Steady, Glow, Overlay, Stack,
Updown, Chase, Snake, Sparkle, Twinkle, Fade, Wave, Buddly, Falling,
Fireworks, Jump, Blending, Rainbow, Carnival
TWILIGHT FUNCTION
You can change the light intensity with the dimmer bar
COLORS
With this function, you can adjust any color shade
TIMER
Using this function you can set the desired lighting schedule – on, off and
days of the week. If the timer function is active, the R button on the
controller is white.
CONTROLLER
- The Wifi indicator light blinks RED in pairing mode
- The Wifi indicator light blinks GREEN during connecting to the Internet.
- The Wifi indicator light is steady GREEN on after connected to the Network.
- The Wifi indicator light blinks GREEN when the wireless router has Network error.
- Timer indicator light(white) inside R button
Function Button L
- press 1 time to change function
- long press 5 seconds to reset the device
Function Button R
- press 1 time to change color
- long press 5 seconds to turn on/ turn off the light
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small
parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that
can damage skin, clothing or area where the battery is stored. To avoid the
risk of injury, do not allow any substance from the battery to come into
contact with the eyes or skin. Every battery may burst or even explode if
exposed to fire or other forms of excessive heat. Take care when handling the
batteries. To reduce the risk of injury from mishandling the batteries, take
the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION:
- The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.
- To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During in- stallation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
- Do not disassemble the product, electric shock may occur.
- Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.
- Follow the instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
- DO NOT USE solvents or other aggressive cleaners or chemicals.
- A Declaration of Conformity has been issued for this product. More information
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>