immax 07117-2 Neo Smart Bridge Pro User Manual

: June 6, 2024
: immax

Table of Contents

Product Description
Preparation For Use
Technical specifications
Safety Information
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Intelligent friendly light

Immax NEO SMART BRIDGE PRO
user manual

Product Description

It is a mini Smart Gateway. It consists of a highly integrated Wi-Fi module, low power-consuming ZigBee module, and PCBA. It can be connected to the Smartlife Smart app for device adding, reset, third-party control, and ZigBee group control, meeting smart home requirements

Preparation For Use

You can scan QR code for download below.
Open the Wi-Fi of your phone, click on the “+” in the upper right corner, and select “Smart Gateway”;
The gateway to be added will automatically appear, and please follow the instructions in the App.

**QR code for application download

https://smartapp.tuya.com/immaxneosmart
**

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

Technical specifications

White: color
Protocol: ZigBee 3.0, Wi-Fi
Frequency: 2400MHz – 2483.5MHz
Maximum RF output power: WiFi: 20dBm ZigBee: 10dBm – max 19dBm
Power consumption: max 4.2W
Input voltage: AC 230V 50-60Hz
Smart Gate Input Voltage: 5V 1A
Dimensions: 16.1 x 60.5 x 60.5 mm
Weight: 50g

Safety Information

CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

Do not use different brands and types of batteries in the same device
When replacing the batteries, always replace all the batteries in the device
Do not use rechargeable or reusable batteries.
Do not allow children to insert batteries without supervision.
Follow the battery manufacturer’s instructions for proper battery handling and disposal.

CAUTION: The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste. CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off ). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.

Maintenance

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz