DIGI TransPort WR11 XT 4G LTE User Guide

: June 6, 2024
: DIGI

Table of Contents

Verify your components
Connect the hardware
Get started with the Digi mobile app
Run the Getting Started Wizard
View the TransPort LEDs and startup states
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
TransPort® WR11 XT

Welcome to your Digi product
Get started: This guide helps you with initial product setup. Need more? Find additional product support at www.digi.com/support/TransPortWR11XT. Or connect to the online documentation by scanning this code

https://www.digi.com/support/productdetail?pid=5644

Digi Technical Support: Digi offers multiple support plans to help you get the most out of your product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or visit www.digi.com/support.

Documentation Feedback: To provide feedback on this documentation, send your comments to techcomm@digi.com.

Verify your components

Some models include some additional equipment. For details about the accessories that ship with your product and for a list of available accessories that can be purchased separately, go to www.digi.com/support/TransPortWR11XT. Click on the Part Numbers and Accessories link and then find your specific part number.
Contact a preferred carrier or the distributor for your device to inquire about cellular service options.

Included equipment

Transport Wr11xT

Note A loose label sticker that includes the unique device password is included in the box. Retain this label sticker with your hardware records. This default password will be needed if the device is factory reset and you want to access the web UI on the device or register the device with Digi Remote Manager. If the device was already registered with Remote Manager at the time of the factory reset, you do not need the unique password to access the device in Remote Manager.

Required additional equipment

Optional equipment

DIN rail mounting bracket
Digi part number 76000682| Power supply adapters
(non-U.S. models only)

© 2019 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.

Connect the hardware

Position the Digi TransPort WR11 on a flat, level surface in a location with adequate ventilation. The unit is designed for indoor use. Do not expose the unit to extreme heat or cold, strong magnetic fields, or liquids.
Caution Restricted Access Location: Because of the hot metal surface of the enclosure, installations with operating temperatures greater than 122F (50C) must be limited to Restricted Access Locations accessible only to trained service personnel.
a. Using a screwdriver, remove the SIM slot cover.

b. Insert the SIM card(s) as shown, with the notch facing the bottom-right corner of the device. If you are using only one SIM card, insert it in the SIM 1 slot.

c. Replace the SIM slot cover.

d. Connect the cellular antenna to the WWAN PRI connector on the unit. If the unit is equipped with a secondary cellular antenna connector, connect it to the WWAN SEC connector.

e. Connect the plug end of the 5-volt power supply to the power connector on the unit, and plug the other end into a wall outlet. Alternatively, you can remove the wall plug cover and use the IEC 60320-C6 connector with an AC cord of the same connector type.

f. Connect one end of the Ethernet cable to the Ethernet port on the unit and the other end to an Ethernet port on a PC.

Get started with the Digi mobile app

Take advantage of the Digi Remote Manager subscription bundled with your product model purchase.
Use the Digi Remote Manager mobile app to quickly set up your product model.
Here’s how:
a. Download the Digi Remote Manager mobile app from the App Store (iPhone) or Google Play (Android).
b. Click Log in or Sign Up and then click Sign up to create a new account.
c. You’ll receive an email with login instructions.
d. From the Digi Remote Manager mobile app, click Log in and log into your new account.
e. From the menu, select Install a device with a QR or bar code and scan the installation QR code on the label.
f. Follow the prompts to complete your product model registration.

Run the Getting Started Wizard

If your PC is configured to automatically get an IP address, it can obtain the IP address from the device. Otherwise, make sure your PC can connect to the network 192.168.1.0 (255.255.255.0).

Enter 192.168.1.1 into the address bar of the web browser. The first page of the Getting Started Wizard appears.
Enter login credentials:
a. Enter 192.168.1.1 into the address bar of the web browser. The first page of the Getting Started Wizard appears.
b. Enter login credentials:
n User name: admin
n Password: The default password is printed on the device label.
n If a device that was manufactured prior to release 8.0.0.3 has been upgraded to the current release:
l If the device was upgraded using the Web UI Update Firmware, the router retains the existing default user accounts. For example, after upgrading from release 7.1.2.2 to the current release, the default user account name remains username, and the default password is password.
o After upgrading using the Web UI Update Firmware, if you then factory reset the device, the user name will be admin, and the default password will be the default.
l If the device was upgraded using Flashwriter, the user name is admin, and the default password is the default. n If a device that was manufactured with release 8.x is downgraded to a release prior to 8.0.0.3:
l If the device was downgraded using the Web UI Update Firmware, the user name is admin, and the default password is the default.
l If the device was downgraded using Flashwriter, the admin account is longer be present. Instead, the default account user name is username, and the default password is password.
o After downgrading with Flashwriter, if you then upgrade to 8.0.0.3 or greater using the Web UI Update Firmware, the router will retain the username/password account and not include an admin account. If you then factory default the router, the admin account with the preprogrammed unique password will return.
o After downgrading with Flashwriter, if you then upgrade to 8.0.0.3 or greater using Flashwriter, the admin account with the preprogrammed unique password will again be present and the username/password account will be removed.
c. To run the wizard, click Get Started or click Skip Wizard to manually configure the device.
d. The Getting Started Wizard prompts you to enter your Digi Remote Manager username and password. If you do not already have
a Digi Remote Manager account, go to https://remotemanager.digi.com to sign up for a free trial.
To run the wizard, click Get Started or click Skip Wizard to manually configure the device.
The Getting Started Wizard prompts you to enter your Digi Remote Manager username and password. If you do not already have a Digi Remote Manager account, go to https://remotemanager.digi.com to sign up for a free trial.

View the TransPort LEDs and startup states

n Service LED: Indicates the presence and level of cellular service running on the device.
Off: No cellular service

blink: GPRS mode
blinks: EDGE mode
blinks: UMTS mode
blinks: HSDPA mode
blinks: HSUPA mode
blinks: LTE mode

n Signal LED: Indicates the strength of the cellular signal.
Off: Poor or no signal. Place the device in a location where it gets a better signal.
Amber: Fair
Green: Good
n Power LED:
Off: No power
Green: TransPort device is powered
After the Getting Started Wizard completes, the TransPort web interface appears. For additional configuration, use the web interface and refer to the Digi TransPort User Guide and Application Notes on the Digi website at www.digi.com/support/TransPortWR11. 6 Update device and modem firmware
Digi strongly recommends updating the router’s device and modem firmware before first use. This ensures that the router has the latest device security and cellular network patches applied. To download the latest firmware, go to https://www.digi.com/support>Firmware Updates, select the model and follow the steps outlined in TransPort Firmware Update Instructions.