globe 50108 WiFi Smart Security Camera Instructions
- June 6, 2024
- globe
Table of Contents
globe 50108 WiFi Smart Security Camera
Thank you for selecting Globe as your smart security choice for your home. With proper care, this product will provide years of pleasure and enjoyment. Carefully follow the instructions in order to ensure that this product functions safely and properly for years to come.
SMART Wi-Fi CAMERA
Check out the installation video on our website: globe- electric.com/smart
FEATURES
__
LED
Indicator
light
| Red Light (Solid): Camera’s network is unstable
Red Light (Flashing rapidly): Camera is in pairing mode Blue Light (Solid): Camera is connected
Blue Light (Flashing rapidly): Camera is connecting to network
---|---
SD Card| Supports micro SD Card storage (Max.128G)
Microphone| Audio in
Speaker| Audio out
__
__
Reset
| Press and hold the reset button down for 5 seconds with the pin provided. Once you hear an audible click sound, it means your camera has been set to factory settings, and is now ready to be paired.
SPECIFICATIONS
| Motion detection: up to Sm (26.25ft) | Data security: AES 128 |
|---|---|
| IR distance: 1Om (32.8ft) | Power adapter cord length: 1.Sm (4.921ft) |
| Bit rate: 32Kps-2Mbps | Camera wire length: Sm (16.4ft) |
| Audio: 2-way audio | Total wire length : 6.Sm (21.4ft) |
| Operating Temperature: -20°C- 55°C | Power output: DC 12V, 1A |
| Wi-Fi stand ard: IEEE802.11 b/g/n | Powe r consumption: 4.SW Max |
| Frequency: 2.4 Ghz-2.4835 GHz | Prote ctio n: I P6 5 (Came ra o nly) |
| Wi-Fi security: WPA-PSK/WPA2-PSK |
TOOLS REQUIRED
PRODUCT INFORMATION
MOUNTING INSTRUCTIONS – INDOORS
-
CONNECT DEVICE
Power the camera on and connect to the Globe Suite™ App.
*Please see quick start guide on how to pair with the Globe Suite™ App. -
ENSURE CONNECTIVITY
Before mounting the camera, ensure the camera can connect to the Wi-Fi. Test by plugging into the desired location and check to ensure it’s streaming video on the Globe Suite™ App If you do not see a video stream, the Wi-Fi is not strong enough, and you will need to find a different spot.
Sometimes moving a few inches can help -
PLANNING THE CABLE PATH
Before mounting the camera, please measure the cable along the route where you will be installing it.
The length of the power adapter is 1.5m (4.92 ft.) and the camera wire length is Sm (16.40 ft.). -
MOUNTING YOUR CAMERA
Use a Philips head screw driver or Power Drill with a Philips head to drill in the screws (provided).
If the wall is made of a soft material (dry wall), you may need to use the included wall anchors to hold the screws. Use a 7 /32″ bit for the anchors.
MOUNTING INSTRUCTIONS – OUTDOORS
-
CONNECT INDOORS
Power the camera inside to ensure everything is connected before taking it outside.
-
ENSURE CONNECTIVITY
Before mounting the camera outside, ensure the camera can connect to the Wi- Fi. Test by plugging into the desired location and check to ensure it’s streaming video on the Globe Suite TM App.
If you do not see a video stream, the Wi-Fi is not strong enough, and you will need to find a different spot.
Sometimes moving a few inches can help
-
PLANNING THE CABLE PATH
Before mounting the camera, please measure the cable along the route where you will be installing it.
The length of the power adapter is 1.5m (4.92 ft.) and the camera wire length is 0.43m (1.41 ft.). -
Use a pencil to mark where you will be drilling.
-
Use a 3/32″ drill bit to drill pilot holes in the desired location. Ensure there are no pipes or wires in the mounting location
-
POWER YOUR CAMERA (ADAPTER) FROM INDOORS
– Drill an opening using a 5/8″ bit for the cable to run through.
– Insert your cable through the hole, connect the camera to its power adapter and plug into the outlet.
– Spread silicone sealant around the edge of the camera base before installing to seal it
– Use a power drill with a Philips head to drill in the screws (provided).
– If needed, use outdoor rated wall anchors (not induded) to secure the camera.
Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry. Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback, you may contact us in the following ways:
- Toll Free Telephone: 1-888-543-1388 (North America Only) / Toll Free Fax: 1-800-668-4562 (North America Only)
- E-Mail: info@globe-electric.com / Mail: Globe Electric Customer Service Department
- 150 Oneida, Montreal, Quebec, Canada H9R 1A8
- Please visit our website to discover other quality Globe products: http://www.globe-electric.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>