pivo Pod Smart Smartphone Camera Tracking User Guide

pivo Pod Smart Smartphone Camera Tracking User Guide

POD Overview

1. Smartphone Holder
2. LED Indicator
3. Power Button
4. Extendable Legs
5. Grip Fastener
6. Micro USB charging port
7. Bubble Level
8. 1/4” Screw Thread

Specifications

• Height (without mount) : 5cm /2 inches
• Bluetooth: BLE 4.0
• Maximum load: 1kg
• Battery: 500 mAh
• Weight: 176g / 6.2 ounces
• Charging: Micro USB, 5VDC, 0.5A

Charging the POD

LED Indicator Status

Power Off

| |

Blinking Red

---|---|---

Power On/ Ready for device pairing

| | Blinking Blue
Connected to phone| |

Blue

Charging

| | Red
Fully charged| |

No light

Low battery, not charged

| | Blinking red
Pairing Remote mode| |

Blinking white

Quick Start Guide

Download PIVO APP

Create an account

1. Open Pivo APP and tap “Yes, I got Pivo”
2. Create a Pivo account using a valid email address
   • Tap Create account under the Log in button
   • Fill out the Sign up form
   • Confirm your registration by email
3. Go back to the App and Log in into your new account
   • Tap “Allow” permission to microphone, photo album and voice recognition.

Pair your smartphone

1. Turn your smartphone on and enable the Bluetooth settings.

2. Press and hold the power button for 3 seconds until the LED light turns BLUE.
   

3. In the App, tap “Connect” and follow the instructions on the screen to finish the pairing process.
   

Pair your smartphone

1. Tighten the grip fastener to secure your phone
2. Tighten the grip fastener to secure your phone

Visualize settings and menu

1. Swipe to the left to visualize settings.
   

2. Swipe to the right to visualize the menu.
   

For detailed tutorials about how to use each mode, please visit help.getpivo.com

Remote Overview

•  Capture photo/start recording

•  Increase speed

•  Rotate clockwise

•  Decrease speed

•  Rotate counter-clockwise

•  Rotate clockwise 1 round

•  Rotate counter-clockwise 1 round

•  Stop rotating/ Cancel shooting (may vary depending on the capture mode)

•  Toggle between photo/video mode (may vary depending on capture mode)

• For detailed information and manual about how to use the remote, please visit help.getpivo.com

Pairing the Remote

The Remote comes already paired and ready to use. However, if the Remote becomes disconnected or if the batteries are replaced, the Remote needs to be paired as follows:

1. Press the power button 3 times in quick sucession. The LED indicator will turn white, indicating that the remote pairing mode is ready.
   

2. Press and hold the “+” button on the Remote until you hear 3 quick beeps. This sound indicates that the Remote pairing is complete.
   

Control Settings

With your Remote, you have control over various core settings of your POD including, rotation speed, rotation direction, shooting mode, shutter button, and more.

• Up to 15 meter operating range
• Can be paired to multiple Pivo PODs
• Comes with 1 replaceable 3V battery (coin type)
• For video instructions visit the Pivo YouTube o cial channel at www.youtube.com/c/pivoo cial
• For downloadable version of this manual, go to help.getpivo.com

Additional Information

For video tutorials, visit our o cial YouTube Channel
www.youtube.com/c/pivoo cial

Need more product information? Scan the QR code as shown bellow or visit our support page help.getpivo.com

2019 3i Inc. All rights reserved.
3003 North 1st Street San Jose, California CA 95134
Email: [email protected]
Website: www.getpivo.com
Social media @getpivo

References

• Pivo | AI-Powered Auto Tracking Smart Pod Mount

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>