pivo R1 Auto Tracking Smartphone Pod User Guide

: June 6, 2024
: Pivo

Table of Contents

pivo R1 Auto Tracking Smartphone Pod
POD Overview
Charging the POD
- LED Indicator Status
Create an account
Documents / Resources

pivo R1 Auto Tracking Smartphone Pod

POD Overview

Smartphone Holder
LED Indicator
Power Button
Extendable Legs
Grip Fastener
Micro USB charging port
Bubble Level
1/4” Screw Thread

Height (without mount) : 5cm /2 inches
Maximum load: 1kg
Weight : 176g / 6.2 ounces
Bluetooth: BLE 4.0
Battery: 500 mAh
Charging: Micro USB, 5VDC, 0.5A

Charging the POD

LED Indicator Status

Create an account

Open Pivo APP and tap “Yes, I got Pivo”
Create a Pivo account using a valid email address
Tap Create account under the Login button
Fill out the Signup form
Confirm your registration by email
Go back to the App and Login into your new account
1. Tap “Allow” permission to the microphone, photo album and voice recognition

Pair your smartphone

Turn your smartphone on and enable the Bluetooth settings
Press and hold the power button for 3 seconds until the LED light turns BLUE
In the App, tap “Connect” and follow the instructions on the screen to fi nish the pairing process

Position your phone

Swipe to the left to visualize settings
Swipe to the right to visualize the menu

For detailed tutorials about how to use each mode, please visit help.getpivo.com

Remote Overview

Pairing the Remote

The Remote comes already paired and ready to use. However, if the Remote becomes disconnected or if the batteries are replaced, the Remote needs to be paired as follows:

Press the power button 3 times in quick sucession. The LED indicator will turn white, indicating that the remote pairing mode is ready
Press and hold the “+” button on the Remote until you hear 3 quick beeps. This sound indicates that the Remote pairing is complete.

Control Settings

With your Remote, you have control over various core settings of your POD including, rotation speed, rotation direction, shooting mode, shutter button, and more.

Up to 15-meter operating range
Can be paired to multiple Pivo PODs
Comes with 1 replaceable 3V battery (coin type)
For video instructions visit the Pivo YouTube offi cial channel at www.youtube.com/c/pivoofficial
For a downloadable version of this manual, go to help.getpivo.com

Additional Information

For video tutorials, visit our offi cial YouTube Channel http://www.youtube.com/c/pivoofficial

Need more product information? Scan the QR code as shown bellow or visit our support page help.getpivo.com

2019 3i Inc. All rights reserved.
3003 North 1st Street San Jose, California CA 95134
[email protected]
www.getpivo.com
Social media @getpivo

FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
Consult the dealer or an experienced radio/TV technician for help.

Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Product Description

Documents / Resources

| pivo R1 Auto Tracking Smartphone Pod [pdf] User Guide
PIVOR1, 2AS3Q-PIVOR1, 2AS3QPIVOR1, R1 Auto Tracking Smartphone Pod, Auto Tracking Smartphone Pod, Tracking Smartphone Pod, Smartphone Pod, Pod
---|---