pivo PV-EVL1 Smart Video Light User Manual

pivo PV-EVL1 Smart Video Light

PRODUCT OVERVIEW

1. Power Button
2. LED Power Indicator
3. USB-C Door
4. Light

LED INDICATOR

CHARGING

1. Open USB-C Door
2. Connect Charging Cable
3. Close USB-C Door

WARNING:
Be sure that the USB-C Door is locked after charging the device by firmly pressing it.

USING THE SMART VIDEO LIGHT WITH PIVO+

Create a Pivo Account

1. Open the Pivo+ app.
   Create a Pivo Account with your email address.

   • Create an account by tapping “Sign up”
   • Verify your email address and complete the process.

2. Sign in to your account.

   • Give the required permissions to allow the app to use Bluetooth, microphone, camera, and storage.

Connect to Pivo+

1. Turn your Pivo Video Light on.
2. Open the Pivo+ app and go to the settings page.
3. Press “+” to add a new Pivo device.
4. Scan the environment and select the Pivo Video Light to connect.

Managing your Smart Video Light with Pivo+

1. Connect the Pivo Video Light to Pivo+
2. Open the settings page and click on your Pivo Video Light.
3. Adjust brightness, and color temperature and manage other settings.

Need more information? Visit our Support Hub.

LIST OF ITEMS INCLUDED

• Pivo Smart Video Light
• User Manual
• Cold Shoe Mount
• Charging Cable
• Light Diffuser
• Pouch

For video tutorials, visit our official YouTube channel, youtube.com/getpivo. For information on your country’s warranty policy, please visit https://pivo.ai. Need more information? Scan the QR code below or visit our Support Hub.

DIMENSIONS & SPECIFICATIONS

• Height: 1.61 in. /41 mm
• Width: 1.57 x 1.2 in. /40 x 30.5 mm
• Weight: 1.3 oz /36 g
• Bluetooth: 5.0
• Distance range: 82 ft /25 mm
• Product name: Pivo Smart Video Light
• Model: PV-EVL1
• Battery capacity: 500 mAh
• Charging method: USB-C
• Voltage: 5V
• Charging time: 2 hours

Designed by Pivo Inc. in South Korea Made in China 2022 Pivo Inc. All rights reserved.

USING THE PIVO SMART VIDEO LIGHT

Power On
Press and hold the power button for 2 seconds to turn it on.

Power Off
Press and hold the power button for 2 seconds to turn it off.

Adjusting Brightness
Press the power button to cycle through the three levels of illumination.

Brightness and battery hours

MOUNTING THE PIVO SMART VIDEO LIGHT

1. Screw the cold shoe mount into the Pivo Smart Video Light.
2. Attach the Pivo Video Light to any device that supports a cold shoe mount.

USING THE DIFFUSER

Attach the diffuser to the front of the Pivo Video Light to soften the light.

DECLARATION OF CONFORMITY

(COMPLIANCE NOTICE)

FCC STATEMENT CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

EU COMPLIANCE

This product complies with Directives 2014/53/EU and 2014/30/EU, 2014/35/EU, and 2011/65/EU. Information on conformity can be found at the following website: https://help.getpivo.com/hc/en-001/categories/360006173271-Warranty.

PRODUCT SAFETY INFORMATION

Please read all instructions and warnings before using this product.

Improper use of the product will cause damage to the product.

1. High volume may affect hearing. For traffic safety, Do not use earphones while driving or cycling.
2. Supervise children when using the equipment. The product is not a toy.
3. The battery is included in the product. Please do not expose it to sunlight, fire, or similar overheating: The input voltage of the charger port should not exceed 5V. During charging, when overvoltage, over-current will continue.
4. Please charge your Smart Video Light regularly to maintain its long life.

IC Caution

This device complies with Industry Canadas licence-exempt RSS. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>