GYMAX TY580063 Kids Ride-On Car User Manual

TY580063 Kids Ride-On Car
User Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.

Before You Start

Please read all instructions carefully and keep it for future reference. General Warnings:
Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise, they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all Packaging, separate and count all parts and hardware before Installation.
Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
**** Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface.

PACKING LIST

I. POINTS FOR ATTENTION & SAFETY USE AND MAINTENANCE

1. Keep the manual well for use
2. Put away the removable small spare part. Prevent kids from eating it.
3. The transparent protective film on the electroplating adhesive should be removed before use.Do not throw the package anywhere, avoiding polluting the environment.
4. Do not keep it close to the fire or in high temperature, wet places.
5. Please do not wash the car. Just clean it with a dry cloth.
6. Do not play it on street.
7. Do not play it on a rugged place or slope.
8. Suitable age: 18 months to 3 years old. Peak load: 15 KG.
9. Check the product before playing it in every time.
10. Take out the battery if you do not use it for a long time to avoid the leakage of battery acid.

warning:

1. It should be assembled by an adult.
2. Children should be supervised by an adult while playing.

II. NAME OF SPARE PART PRODUCT SIZE 6831.542.5cm
IS09001:2000 QUALITY SYSTEM AUTHENTICATION PATENT PRODUCT
III. ASSEMBLY LEGEND

1. Assembly of steering pipe: (as shown in Pic 1) Insert a big split pin into the middle hole of the steering pipe, open the split pin outwards on both sides. Pass a big gasket, then urn the car over and put the steering pipe into the hole of the front car and through the steering shaft hole, put a big gasket, put a Pic.1 big split pin, and open it outwards on both sides.

2. Assembly of front-wheel components: (as shown in Pic 2) Each side: Insert a small gasket, a front axle sleeve (long), a wheel and a small gasket, a small split pin, through the slotted end of the front iron axle in turn. Cover hubcaps on wheels;

3. Install the backrest (as shown in Pic 3) Align the backrest with the backrest holes of the car body and press down firmly until it is fastened.

4. Rear-wheel assembly (As shown in Pic 4)
   ° Buckle the anti-warping plate to the rear of the car in the direction shown in the pic.
   ° Pass the small gasket, wheel, rear axle sleeve (short), small gasket through the slotted end of the rear shaft (long) successively.
   ° Then thread the rear shaft through the rear axle hole of the car body and anti-warping plate.
   ° Pass small gasket, rear axle sleeve (short), another wheel, small gasket through the rear shaft.
   ° Then make the small split pin stuck in the rear shaft slot.
   ° Cover the outside of two wheels with hubcaps respectively.

5. Assembly of the steering wheel (as shown in Pic 3)

Plug the steering wheel into the headstock socket, install the power cord into the headstock, install the steering wheel on the main shaft, then penetrate the 5 mm wire through the steering wheel round hole, install the screw nut with a cap into the steering wheel hexagon hole, and lock it with a screwdriver.
IV. THE INSTALLATION AND USE OF STEERING WHEEL

1. Insert 3 AAA batteries into the steering wheel battery box according to the correct polarity. Close the battery cover in the direction shown (Pic 5)
2. Button function: The button on the left side of the steering wheel is for music, and the button on the right side is for the horn. The music button can be switched at will, making the baby’s car music richer and wonderful.

BATTERY SAFETY PRECAUTIONS:

A. The terminal should not be short-circuited;
B. Rechargeable batteries can only be charged under adult supervision;
C. Rechargeable batteries can only be removed from the toy;
D. Do not mix different types of batteries or the new and old batteries cannot be mixed;
E. The exhausted batteries should be removed from the battery;
F. Non-rechargeable battery cannot be recharged;
G. The battery shall be put in the correct way.
V. Function Introduction

1. Gliding function: Move forward or backward, turn left or right, helping coordinate hand and foot ability.
2.  Stroller function: The baby grasps the backrest with both hands and pushes the car forward to help the baby learn to walk.
3. . Storage function: Open the seat cushion and items can be stored in it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>