XOU24BCGOA 24 Inch Beverage Center Glass Framed Overlay, Reversible Hinge User Manual

June 9, 2024
XO

XOU24BCGOA 24 Inch Beverage Center Glass Framed Overlay, Reversible Hinge

XOU24BCGOA
ALL PURPOSE BEVERAGE  CENTER

When buying any XO appliance you can be confident you have chosen a high quality, innovative and stylish product from a company that cares about you!
If you require service or have questions, Help is only a phone call away –
call : 973-403-8900
Talk to one of our undercounter experts

CONGRATULATIONS
on purchasing your XO. Before you proceed, take just a moment to register your XO at: www.xoappliance.com/register-your-product/

REGISTRATION HELPS YOU BY –
Ensuring warranty coverage should you need service Providing ownership verification for insurance purposes Let’s XO notify you in the event of product changes or recalls.

the job isn’t done until
To ensure that the installation process is successfully completed, here are few things to review…

  • Is the unit plugged in?
  • Are the controls on? (Panel will illuminate.)
  • Are the controls operating correctly?
  • Has the unit been properly leveled – both side to side and front to back – with all 4 leveling feet securely making contact with the floor?
  • This is an OVERLAY unit – have the panels been securely attached and properly aligned?
  • After installation, does the door open sufficiently to fully extend the shelves?
  • Is the door sealing properly?
  • Is the handle secure?
  • Have you thoroughly inspected all surfaces for any imperfections?
  • Have you reviewed this manual with the customer and explained the unit’s operation and care?Has the customer received copies of the literature and keys?
  • Have you properly disposed of all packing materials properly (recycle, please)?
  • Is the customer satisfied?

RISK OF CHILD ENTRAPMENT!

  • An empty refrigerator is a very dangerous attraction to children.
  • Remove door gaskets, latches, lids, lock and/or doors from unused or discarded appliances, or take other actions to guarantee them harmless.
  • Always dispose of old appliances in accordance with local laws and regulations.

PRODUCT OVERVIEW

XOU24BCGOA
ACCOMMODATES
EUROPEAN | ADA | AMERICAN STANDARD
CABINETRY

record your serial number here in case you need it later

your safety matters

Please read through completely before using your XO Unit

  • To prevent damage to the door gasket, the door must be opened all the way before pulling racks out.
  • The appliance must be positioned so that the plug is accessible.
  • Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or distort the frame.
  • The compressor will get HOT during operation / touching it may cause injury.
  • During installation follow all safety tips provided in this manual / appropriate safety equipment such as safety glasses and work gloves should be worn.
  • Two people should move or lift your XO unit to prevent injury or damage.
  • Remove all interior and exterior packing materials prior to installation and dispose of properly.
  • Never cover the bottle racks with foil or other material which will impede internal air circulation.
  • For maximum efficiency, keep the door tightly shut unless loading or unloading and never overload your XO unit.
  • Before installing, allow your XO unit to sit upright for 2 hours at the install site. This will allow the cooling system to stabilize after transportation. Failure to  follow this step may cause problems.
  • Never store perishable food products such as meat or cheese in your wine cooler.

Location

  • Your XO unit should be located away from direct sunlight and heat sources (stove, heaters, etc.) which may increase electrical consumption. High or low ambient temperature may cause units to work improperly.
  • The floor must be strong enough to support your XO unit fully loaded.
  • Your XO unit must not be installed in areas of where water or excessive moisture are present.
  • Your XO unit must not be installed near where flammable, corrosive or hazardous materials are present.
  • Your XO unit’s final installation must observe the correct minimum air clearances around and behind the unit to ensure adequate ventilation. In addition, all ventilation openings must be kept clear and free of obstructions, failure to do so will result in damage to the unit.

WARNING

  • NEVER use external heat sources to accelerate defrosting
  • NEVER permit unauthorized service or modifications to your XO unit
  • NEVER tamper with the sealed refrigerant system – this unit uses R600A Refrigerant which is flammable. It should never be used in the vicinity of any flammable or explosive ignition sources.

AL WAYS FOLLOW THE ELECTRICAL SAFETY INSTRUCTIONS OUTLINED IN THIS MANUAL.

ELECTRICITY THIS IS SERIOUS

Failure To Follow All Elec trical Safety Measures May Result in Serious Injury, Fire Or Death

  • All electrical work should only be performed by an experienced, licensed electrician.

  • All XO units MUST be grounded for safe operation and come equipped with a 3 Prong molded cord/plug for that purpose.

  • NEVER remove or disable the 3rd prong with an adapter.

  • NEVER use an extension cord to operate your XO unit.

  • Your XO unit is built to operate on 115V 60Hz and should be plugged directly into a dedicated 15 amp 3 prong outlet. If you are uncertain as to the
    voltage, amperage capacity or if the 3rd prong is properly grounded – consult a licensed electrician.

  • To maximize the depth of the installation recess – your outlet should be mounted flush with the wall.

  • Your XO unit should not share the circuit with any other electrical devices as this may cause overloading, overheating, blown fuses or tripping circuit breakers.

  • In a worst case this can pose a fire hazard.

  • NEVER handle your XO unit in wet conditions as this can pose a severe danger of electric shock.

  • Exercise care when moving your XO unit to avoid damage to the electrical cord. If the electrical cord of your XO unit becomes worn or damaged it must be replaced immediately by a qualified technician.

  • NEVER unplug your unit by pulling on the cord. Unplug by gripping the plug firmly and pull out straight from the outlet.

INDOOR USE ONLY:

  • This model is intended for indoor/interior applications only and is not to be used in installations that are open/exposed to natural elements.
  • This unit is designed to operate between 60 F and 90 o F. Higher ambient temperatures may reduce the unit’s ability to reach low temperatures and/or reduce performance.
  • For best performance, keep the unit out of direct sunlight and away from heat generating equipment. In climates where high humidity and dew points are present, condensation may appear on outside surfaces, particularly in non air conditioned spaces.
  • This is considered normal. The condensation will evaporate when the humidity drops.

CAUTION
Damages caused by ambient extremes are not covered by the warranty

SERVICE 115V – 60 Hz – 1 phase
AMPS 15 Amp Circuit Breaker
Requires a Dedicated Outlet
All electrical work must be performed by a licensed electrician

Installation Instructions

right or left
how to change the door opening
Your XO arrives with a right hand hinged door – but it is easily to reverse if you choose. To reverse the hinge on your unit, follow the directions below:

  1.  Open the door and remove the screw hole covers (1) on the left hand side as shown in Fig A.
  2. Start screws into these positions as per Fig B, but do not tighten the screws.
  3. Remove all screws from both the upper and lower hinge, and then remove the door.
  4. Rotate the door 180 degrees, (top to bottom) and place the hinges onto the screws (4) in Fig B. Slide the slots of the hinge until fully seated against the screws, then tighten the screws to secure the hinges (Fig D).
  5. Place the screw hole covers in the right hand side screw holes as shown in Fig D.

**A Perfect Fit

**

your xo is this big ( or small, as the case would be )
height, width & depth XOU24BCAGO 24” BEVERAGE CENTERXOU24BCGOA-24-Inch-
Beverage-Center-Glass-Framed-Overlay-Reversible-Hinge-
fig-5 CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” IN OVERALL DEPTH YOUR CHOICE OF CABINET HANDLES WILL ALSO ADD DEPTH

INSTALLATION UNDER ADA COUNTER
ROUGH IN DIMENSIONSXOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-
Overlay-Reversible-Hinge-fig-7XOU24BCGOA-24-Inch-Beverage-Center-Glass-
Framed-Overlay-Reversible-Hinge-fig-8

IF THE DOOR CAN’T OPEN FULLY – YOU CAN’T PULL THE SHELVES OUT.

us standard height cabinetsXOU24BCGOA-24-Inch-Beverage-Center-Glass-
Framed-Overlay-Reversible-Hinge-fig-9XOU24BCGOA-24-Inch-Beverage-Center-Glass-
Framed-Overlay-Reversible-Hinge-fig-10

IF THE DOOR CAN’T OPEN FULLY  –  YOU CAN’T PULL THE SHELVES OUT.

Talking Toe Kicks

  • TOE KICKS CAN VARY IN SIZE DEPENDING ON THE STYLE OF CABINETRY. THE MOST COMMON ARE 3” DEEP AND 4” TALL. THE DRAWING BELOW IS BASED ON THAT.
  • EXTEND THE LEVELING FEET AT LEAST 2”.
  • INSTALL YOUR OVERLAY PANEL, FOLLOWING THE INSTRUCTIONS IN THIS MANUAL ALLOWING THE APRON TO EXTEND BELOW THE DOOR. THIS WILL HIDE THE TOE KICK WITHOUT OBSTRUCTING IT.
  • AIR WILL HAVE THE ABILITY TO PASS OVER THE TOE KICK AND UNDER THE THE LOWER EDGE OF THE DOOR.

IMPORTANT : THE VENTILATION OPENINGS LOCATED IN THE TOE KICK MUST NOT BE OBSTRUCTED

  • IF YOU ARE USING A CUSTOM PLINTH – AN OPEN AREA MUST BE CUT INTO IT TO PROVIDE ADEQUITE VENTILATION – FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE UNIT.

LET’S FACE IT
INSTALLATION UNDER A STANDARD HEIGHT COUNTER – 4 TOE KICKXOU24BCGOA-24
-Inch-Beverage-Center-Glass-Framed-Overlay-Reversible-Hinge-
fig-15

  • The XOU24 GOA series is 32 1/4″ Tall. The standard US undercounter refrigerator is 34″ Tall. Allow the additional panel length to extend as an apron below the door.
  • The panel extention and toe kick are now able to visually hide the vents without obstructing air flow.

DOOR PANELS MUST BE FINISHED FRONT AND BACK TO PREVENT WARPING.

BEFORE BEGINNING: Attach any handle hardware before mounting the panel to the door frame.

  1. Fully open the door and starting at one corner out of the gasket channel.
  2. After removing the gasket lay it out on a flat surface to retain its shape.
  3. Using clamps to hold it securely in place, position the overlay panel against the door.
  4. Using the frame as a guide, drill six (6) pilot holes 1/8” (3mm) in dia. into the finish panel taking care not to drill through the panel.
  5. Using the ST4-30 self-tapping screws provided, fasten the panel to the door frame.
  6. Beginning at one corner, re-install the rubber door gasket into the gasket channel.

XOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-Reversible-Hinge-
fig-17

IMPORTANT NOTE: The back of the panel must be finished to prevent warping and cracking.https://youtu.be/EiezTdUrVGI www.xoappliance.com

OPTIOAL STAILESS STEEL DOOR PANEL KIT P/M: XOU24ADASG
The stainless door panel mounts in the same fashion as a wooden cabinet door.XOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-Reversible-
Hinge-fig-19The Stainless Steel door panel comes with both the designer stainless bar handle – and our PRO Style Handle – you get to choose which style to install Keep the hex key in a safe place for future use.
Two extra set screws are included in the hardware bag.

foot sliders
USING THE FOOT SLIDERS

To compensate for different height cabinetry, your XO has leveling legs that can extend as much as 2-9/16” (65mm).
When installing your XO with the leveling legs extended, use the FOOT SLIDERS provided under the feet on each side to help avoid catching and damaging the legs.

it’s like zen – but cooler get your level out
DO NOT NEGLECT THIS IMPORTANT STEP

Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs are seated firmly on the floor and the interior floor of the unit is level both front to back and side to side.
Failure to follow this important step may cause problems with proper door operation, excessive condensation, vibration and noise.

finishing touches
TIE IN BRACKET

With the door open, using the screws provided connect the tie in bracket in the upper corner of the wine cooler opposite the hinge – then screw the flange of the bracket to the cabinet.

TOE KICK | PLINTH

  • Your XO comes with a 4” (100mm) toe kick | plinth.
  • It can accommodate up to a 6” (150mm) toe kick | plinth.
  • If you are not using the vented toe kick that comes with the unit you must make provision for ventilation by cutting a slot 2-3/16” H x 19-5/16” W (55mm H x 490mm W)

Operating Instructions

meet your xoXOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-
Reversible-Hinge-fig-26

WHAT’S THAT NOISE…
You new XO is designed for quiet operation but you may hear some sounds your old unit didn’t make. Because they are new you might be concerned, but they are usually normal. Sounds can also be amplified by hard surfaces like flooring or tiles. Here is a description of the types of sounds you might hear and what might be causing them. may run longer than your old unit. You might also hear a pulsating or high pitched sound as the compressor and fans adjust to improve performance. During defrosting cycles you may hear some water running into the drip pan. The refrigerant may sometimes cause a rattling or gurgling sound as it flows through the system and the you might hear clicking sounds as the unit starts and stops.

take control

temperature
Your XO Beverage Center has and easy to use digital touch control panel.XOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-Reversible-
Hinge-fig-28

  • Your XO Beverage Center remembers your last temperature setting in case of a power failure and automatically adjusts to the previous setting when power is restored.
  • When the +/- button is pressed, your beverage center automatically enters set up mode. The LED Display will begin flashing and display the temperature setting.
  • Each time you press the + button, the temperature setting will increase 1 Degree.
  • Each time you press the – button, the temperature setting will decrease 1 Degree.
  • Once you have reached the desired temperature setting, the display will continue to flash for 5 seconds, then revert to showing the compartment temperature.
  • To view the real time temperature, press and hold the +/- button for 5 seconds.
  • The interior temperature will flash in the LED Display for 5 seconds.
  • If you wish to change the display from Fahrenheit to Celsius (or vice versa) press and hold both “+” and “-” simultaneously for 5 seconds.

led lights

  • L1: When you turn on your beverage center, the internal light will turn on when the door is opened, and off when the door is closed.
  • L2: Press , the internal light will remain on continuously and dim after 3 minutes.
  • L3: Press twice, the internal light will remain on for 10 minutes and then shut off.

tri color lighting

  • When you turn your XO wine cooler on, the interior lights will be white. Press the icon and the lights will change to midnght blue. Press the icon again and the lights will change to honey amber.

eco mode

  • When you turn you XO Unit on, it is set to work in Standard Mode.
  • Press and ECO Mode is turned on, ECO Mode is an energy saver function.
  • Press again and ECO Mode is turned off, the unit returns to Standard Mode.

Sabbath Mode

  • Sabbath Mode was designed for use on the Jewish Sabbath and Holidays.
  • The Sabbath Mode feature makes it possible to use your appliance during the duration of the holiday. The Sabbath Mode overrides typical reactions caused by interactions with the unit. While in Sabbath Mode your appliance will operate, however it will not respond to your actions.
  • To initiate Sabbath Mode: Press and hold both + for 5 seconds.
  • The display will show either “Sb” or “Sb On” depending on the model you have to indicate Sabbath Mode is engaged.
  • To turn Sabbath Mode off and return to Standard Mode, Press and hold both + for 5 seconds again .

DEMO mode

  • Press for 5 seconds, DEMO mode is turned on.

  • Press for 5 seconds again, DEMO mode is turned off and your XO returns to standard mode.

single zone control
beverage centers

  • The temperature setting can be adjusted from 34-50°F.
  • Your controls are simple and intui tive to operate.

how many 12 oz cans will this model hold
With the shelves arranged in this manner, your XO will hold a maximum of standard 12 oz cans.XOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-
Reversible-Hinge-fig-33

Shelf capacitiesXOU24BCGOA-24-Inch-Beverage-Center-Glass-Framed-Overlay-
Reversible-Hinge-fig-34

Avoid overloading
Storing little or no product can cause excessive condensation

Care and Cleaning

a little TLC goes a long way
Cleaning the Inside:
Walls, floor, inside window, and shelves – Some water deposits and dust can be removed with a dry paper towel, others may require a damp cloth.
Cleaning the Outside:
Outer case – It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.
Control Panel and Door – Wipe with a damp cloth and dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasive, or sharp objects on the panel, they can damage it.
CAUTION: Some paper towels may also scratch the control panel and glass on the door.
Door Surface – Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth.
Rinse well with damp cloth.
NOTE : Do not use cleaners containing ammonia or alcohol on your XO unit. Ammonia or alcohol can damage the appearance of the appliance.
NOTE: Never use any commercial/abrasive cleaners or sharp objects on any part of the wine cooler.

power failure

  • Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened.
  • If the power is off for a longer period of time, you need to take the proper steps to protect your contents.

vacation

  • Short vacations: Leave the XO unit operating during vacations of less than three (3) weeks.
  • Long vacations : If the appliance will not be used for an extended period, remove all items and turn off the appliance.

Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

ENERGY SAVING TIP
The unit should be located in the coolest area of the room, away from heat producing appliances, and out of direct sunlight.

moving
Remove all items and securely tape down all loose items (shelves) inside your appliance Turn the adjustable leveling legs all the way into the base to avoid damage
Tape the door shut and transport the XO unit securely in the upright position
Blanket wrap the exterior to help protect against scratches and other damage

a breathe of fresh air for best results change every 3 to 6 months

faq’s

  • Q There doesn’t appear to be any power to the unit.
    A There are 3 easy to check common causes:
    (1) Check to see if a fuse has blown or circuit breaker has tripped & replace or reset.
    (2) Check to ensure the plug is fully inserted into the outlet.
    (3) A power surge may have caused the unit to shut down to protect itself – Unplug the unit,
    wait 5 seconds and plug it back in.

  • Q The cabinet temperature is too high.
    A Check these 5 things:
    (1) Check the temperature setting and adjust as needed.
    (2) Make certain the door is completely closed and the door gasket is sealing properly.
    (3) Avoid opening the door frequently and/or leaving the door open for extended periods.
    (4) Did you load a large quantity of warm bottles at once? It is better to add smaller quantities in several loads.
    (5) Make certain nothing is blocking the toe kick vents (including dust behind the vents).

  • Q The alarm is beeping and “HI” is displayed on the control panel.
    A See the question and answers above – if the door has been tightly closed and you have not
    recently added a large quantity of warm bottles, it may be a mechanical issue. Unplug the unit
    and call for service.

  • Q The alarm is beeping and “LO” is displayed on the control panel.
    A This may be a sensor malfunction. Unplug the unit and call for service.

  • Q Why does condensation form on the inside or outside of my XO unit?
    A It may be that the door is either opened repeatedly or not closed completely. It may also be due to an excessive ambient humidity, in which case it will clear when the humidity drops.

  • Q There is warm air coming from the bottom of my unit.
    A This is normal. Cooling systems must vent the heat they remove from inside the cabinet.

  • Q Why does the evaporator fan run all the time?
    A It continually recirculates air to ensure cabinet temperatures are consistent.

  • Q How do I adjust temperature?
    A Refer to Pages 7 & 10.

  • Q When does the high temperature alarm sound?
    A If internal temperature exceeds 70 F for more than 60 minutes.

  • Q If the door hinge is next to a wall, how much clearance do I need to open the door?
    A The location, inc lud inn g fish pa nel an d a ny ha rdware must allow the door to open at least 90

we’ve got your back

90 DAY LOVE IT or LEAVE IT.  For 90 Days all our products are backed by our unique Love it or Leave it Guarantee.

TWO-YEAR PARTS & LABOR LIMITED WARRANTY.
XO warrants to the original purchaser of every new XO refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s obligation under this warranty is limited to a period of two (2) years from the date of original purchase.

FIVE-YEAR COMPRESSOR LIMITED WARRANTY.
XO warrants its compressor to be free from defects in both material and workmanship under normal and proper use and maintenance service for a period of five (5) years from the date of original purchase. If the compressor fails during that time period due to a defect in material or workmanship, XO will supply a replacement compressor free of charge.  The consumer will be responsible for all related transporation and labor costs.  Product must be registered with XO to qualify for this warranty.
TERMS APPLICABLE TO EACH WARRANTY.
Any part covered under the above warranties that is determined by XO to have been defective within the time frame is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by XO.

WARRANTY CLAIMS.
All claims for labor or parts must be made directly through XO. All claims should include: model number and serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must be returned to XO along with the above listed information.

WHAT IS NOT COVERED BY THIS WARRANTY.
XO’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty.  Open box, factory seconds, scratch and dent, floor models and commercial applications are excluded from these warranties.  Consumer shall be responsible for labor and transportation costs where noted above.

NO CONSEQUENTIAL DAMAGES.
XO is not responsible for economic loss, profit loss; or special, indirect or consequential damages, including without limitation, losses or damages arising from food or product spoilage claims whether or not on account or refrigeration failure.

WARRANTY IS NOT TRANSFERABLE.
This warranty is not assignable and applies only in favor of the original purchaser/user at the original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,

express or implied, including any warranty or merchantability or fitness for a particular purpose.

IMPROPER USAGE.
XO assumes no liability for parts or labor coverage for component failure or other damages resulting from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit.
ALTERATION OR NEGLECT.
XO is not responsible for the repair or replacement of any parts that XO determines have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.

IMPROPER ELECTRICAL CONNECTIONS.
XO is not responsible for the repair or replacement of failed or damaged components resulting from electrical power failure, high or low voltage, use of extension cords, or improper grounding of the unit.

YOUR RIGHTS UNDER STATE LAW.
This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you.

OUTSIDE U.S.

This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside the 48 continental United States.

To obtain ser vice:

Call 973-403-8900 |email [email protected] | or submit a request on our website www.xoappliance.comXOU24BCGOA-24-Inch-
Beverage-Center-Glass-Framed-Overlay-Reversible-Hinge-
fig-36

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

XO User Manuals

Related Manuals