OLIGHT Seeker 3 Ultra Bright Floodlight Flashlight User Manual

USER MANUAL

Seeker 3

Thank you for purchasing this Olight Product.
Please read this manual carefully before use and keep it for future reference!

IN THE BOX

SPECIFICATIONS

• All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the flashlight.
  Note: The maximum output brightness will decrease as the battery voltage decreases.

PRODUCT OVERVIEW

BEFORE FIRST USE

AVAILABLE BATTERIES

• 1 x customized 4000mAh 21700 rechargeable lithium battery

BATTERY LEVEL INDICATOR

NOTE: Under the moonlight, when the battery power is more than 10%, the indicator won’t turn on; when the battery power is less than 10%, the indicator will light up red or the red indicator blinks.

USB MAGNETIC CHARGING CABLE — MCC3

is insufficient to provide 5V 2A power capacity, the charging time will be longer)
Charge indication| Red: charging
Green: full (over 95%) or disconnected with a flashlight

• Before the first use please fully charge the product.
• Connect the USB end of the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (best charging efficiency with a USB power source of no less than 10W (5V 2A). The red indicator means charging, while the green indicator means charging completed (battery level ＞95%).
• Only charge with standard MCC3, not compatible with other MCC.

DANGER

• DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
• DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to flammable objects.
• DO NOT separate the battery from the flashlight. The included rechargeable battery has extremely strong discharge power. For example, the external conductor short circuit battery may lead to overheating, combustion, or even cause unexpected disasters.
• The battery can only be charged while installed in the flashlight. When charging, please use the provided charging cable for your light or a compatible charging cable.

WARNING

• Keep out of reach of children.
• When the flashlight is working on the high mode, the surface temperature can reach 50°C. Please switch off the flashlight temporarily or turn it to low mode.
• If the light is about to be put aside for a long time or be transported, please unscrew the tail cap for half a circle to cut off the circuit.
• DO NOT use the high mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold.
• Ensure the battery is inserted with the negative ( – ) end pointing to the head of the flashlight ( LED side ).
• Store the battery with care; if the battery needs to be changed, please take good care of the battery taken out. DO NOT mix it with the conductive metals.

NOTICE

• When the light is working on the Turbo or High mode, the light will decrease the output when it with high temperature to prevent it from overheating and hurting the users’ hands.
• Please keep the charging port clean and dry before charging.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

HOW TO OPERATE

ON/OFF: Single-click the side switch to turn the light on/off. When the light is turned on, it will return to the previous brightness level selected before the light was turned off. (Only the moonlight, low, medium, and high mode can be memorized when the light is switched off. The turbo mode is memorized as high mode, the high mode will only be memorized for one minute before reverting to medium mode. The strobe mode cannot be memorized).
CHANGE BRIGHTNESS LEVEL: When the light is on, press and hold the side switch and it will start from the present brightness level, automatically cycle through Low, Medium, and High mode. The mode is selected when the side switch has been released. (Please note: moonlight and turbo are not in the automatic cycle.)
MOONLIGHT: When the light is off, press and hold the side switch for over one second to access the moonlight mode.
TURBO AND RETURN: Quickly double-click the side switch to enter into Turbo, double click again to return. If the memorized mode were High or Medium, the output is Medium; if the memorized mode were Low or Moonlight, the output is the memorized mode.
STROBE: Quickly triple-click the side switch to activate strobe mode. To quit this mode, single click or press and hold the side switch.
TIMER: The Seeker 3 has a long (9 minutes) and short (3 minutes) timer when the light needs to be automatically turned off. When the light is on, double click and hold the side switch under the current brightness level to access the timer settings. A single blink accesses the short-timer while two blinks access the long-timer. The light will automatically turn off when the timer is up.
LOCKOUT/UNLOCK: When the light is off, press and hold the side switch (for about 2 seconds) to access the button lockout mode (the light will enter the moonlight mode first and will then switch off to signal the lockout mode). The red indicator below the switch will be on for a short time to signal that the light is still in lockout mode. To unlock it, keep holding the side switch for over one second until the moonlight mode is on again.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery Warranty : Olight offers a one-year warranty for all rechargeable batteries.

MCC magnetic USB charging cable: One year. For any of the fragile or low- value fittings not covered above, like lanyard and clip, you can contact the post-sale in 30 days after the purchase, if it has any quality drawback or damage under normal use conditions. If such drawback or damage occurs 30 days after the purchase or under abnormal use conditions, we will only offer conditional quality assurance as appropriate.

USA Customer Support
cs@olightstore.com
Global Customer Support
Customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
** 3.0336.6010.9000
A. 09. 17. 2021**

References

• Olight | Illuminate Your World.
• Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>