anko 43099788 15W Wireless Charging Stand User Manual
- June 6, 2024
- Anko
Table of Contents
anko 43099788 15W Wireless Charging Stand
Features
Charging for any wireless device such as Apple or Samsung smartphone.
Safety instructions
- Do not disassemble or throw into fire or water, to avoid damage.
- Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
- Do not place too close with magnetic stripe or chip card (ID card, credit cards, etc.) to avoid magnetic failure.
- Please keep the distance at least 30cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- Some phone case may affect the charging performance. Ensure there is no any metal object between your phone cases or try to take it off before charging.
- To take care of the children, to ensure that they won’t play the wireless charger as a toy.
Packing contents
- Wireless charging stand x 1
- USB to USB-C Charging cable x 1
- 18W QC 3.0 port USB charger x 1
- User manual x 1
Operation Instructions
- Connect USB power adapter (included) to socket while connect the USB-C cable (included) to the USB-C port of the charging stand. The RGB light will turn on.
- Place wireless charge enabled smartphones on wireless charging pad. LED light turn into white to start charging.
- If the charging position is improper or low power input (less than 5V 2A), the white LED light will flashing.
- Check the charging icon displayed on the mobile phone’s screen for the charging status.
- The hidden silicones can be manually adjusted front and back, you can place your phone in vertical or horizontal position.
RGB LED Light Mode (Control button only to control the RGB light) Rolling mode ➨Breathing mode ➨Fix color mode
-
RGB LED light slow-rolling mode at the beginning when connecting to USB power adapter.
-
Short press the button to different light modes. Slow rolling mode -> Fast-rolling mode ->
Slow Breathing mode -> Fast Breathing mode ->Fix color mode: Red -> Green -> Purple -> Blue -> Yellow -
Long press the button to turn off the RGB light.
Specification
Input: DC 5V 2A / 9V 2A/ 12V 2.2A
Output: 15W Max
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>