Lenco PIR-645 Portable Internet DAB+/FM Radio With Bluetooth And Rechargeable Battery User Manual

Lenco PIR-645 Portable Internet DAB+/FM Radio With Bluetooth And

Rechargeable Battery

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. 13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with diluted detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failure of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for nonprofessional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with a power cable or AC power adaptor:

    • If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket-outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require an earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:

    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    •  If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

    • The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
    • The battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

These instructions are related only to products using power cable or AC power adaptor.

Accessories

• Power adaptor
• User manual
• Remote control

1. Power button
2. Mode button
3. Info/Menu button
4. Alarm button
5. -Vol+/OK/Tune button
6. Station/Last Song button
7. Back/Next Song button
8. Presets button
9. DC in Socket
10. Earphone jack
11. Aux in Socket

Setup Wizard

For initial use, the display will show “Setup Wizard” screen.

Scroll “-Vol+/OK/Tune” knob to confirm “YES” to start setup. Options in the setup wizard include the following: Date/Time Set 12/24 hour format Auto Update Synchronously update clock from the playing program you selected or set by yourself

• Update from DAB
• Update from FM
• Update from Network Select your time zone and daylight savings is needed.
• No Update Set the date and time is needed.

The Wizard will now scan your location for accessible wireless networks. When the scan has finished, a list of networks will be displayed. Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the list as [WPS].

Scroll “-Vol+/OK/Tune” knob and then press it to select a wireless network you want.

1. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and display the password entry screen as follows:
   Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network automatically.

2. Scroll “-Vol+/OK/Tune” knob to cycle through the alphanumeric character list, press “-Vol+/OK/Tune” knob to select an appointed character. Note: WEP/WPA passcodes are case-sensitive.

3. After selecting the final character of your password, scroll “-Vol+/OK/Tune” knob to “OK” and then press “-Vol+/OK/Tune” knob to confirm. The radio is connected to wireless network.

4. If you wish to establish a connection via WPS, press “-Vol+/OK/Tune” knob after you have selected desired network. The radio then offers the option to initiate WPS. Scroll “-Vol+/OK/Tune” knob to select through Push Button, Pin and Skip WPS, press “-Vol+/OK/Tune” knob to confirm.
   Push

Button

| You must start the WPS scan on the remote station (e.g. router). Consult the manual for your router or Access Points (AP) to learn how to do this. After you have done this, press “-Vol+/OK/Tune” knob on the radio and then both

devices will establish a connection.

---|---
Pin| The radio creates an 8-digit number, which you then have to enter into the remote station. After entering the PIN, press the “-Vol+/OK/Tune” knob to establish the connection between both devices.
Skip WPS| In addition to a WPS connection, you can also establish a connection using a

Pre-Shared-Key. The required key is often on the rear of the router, or you may have defined it yourself. This method is used automatically for networks

without WPS. You can call up the Pre-Shared-Key function on networks with WPS by selecting menu item “Skip WPS”.

An input field should now appear. You can enter the required key (PSK) by

turning and pressing “-Vol+/OK/Tune” knob, and then select“OK” and press

“-Vol+/OK/Tune” knob to complete the entry. The radio should now establish the connection to the network.

5. Setup wizard completed, press “-Vol+/OK/Tune” knob again to exit.

Internet Radio Mode
To select an internet radio station, follow the below section to choose stations.

1. Press the Mode button to choose Internet Radio
2. For Initial use, it will display the options for you to find an internet station. You can find a different internet radio stations in the next menu by different methods.
3. When you want to find another podcast, press and hold the “Info/Menu” button until show the main menu. While “Podcast list” is highlighted, press “-Vol+/OK/Tune” knob to confirm. You can find different Podcast by selecting different criteria again.

Local

location

| Local location will change according to your current

location (e.g. Germany). It displays local stations of your

---|---
| current location
---|---
History| This shows your previous listened stations
Search| You could search radio station by enter key words
Location| You could select radio station by first define station

location

Popular| List the most popular stations
Discover| By setting criteria to narrow down stations list. Origin – choose radio stations according to location

Genre – choose radio stations according to their content, for example Classic, Sport, News, etc.

Language – choose radio stations according to their

broadcast language

Note: Some radio stations do not broadcast 24 hours per day, and some stations are not always online.

Podcasts Mode

To select a Podcast station, follow the below section to choose stations.

1. Press Mode button to choose Podcasts.
2. For Initial use, it will display the options for you to find podcasts. You can find different Podcasts in the next menu by a different method
   Local

location

| Local location will change according to your current

location (e.g. Germany). It displays local stations of your

current location

---|---
Search| You could search podcasts by enter key words
Popular| List the most popular podcasts
Location| You could select podcasts by first define location
Discover| By setting criteria to narrow down podcasts list. Origin – choose podcasts according to location

Genre – choose podcasts according to their content, for example Classic, Sport, News, etc.

Language – choose podcasts according to their broadcast

language

3. When you want to find another podcast, press and hold the “Info/Menu” button until shows the main menu. While “Podcast list” is highlighted, press “-Vol+/OK/Tune” knob to confirm. You can find different Podcast by selecting different criteria again.

Note: Some podcasts do not broadcast 24 hours per day, and podcasts are not always online. DAB Radio Mode Selecting DAB mode

1. Press the Mode button to choose DAB Radio.
2. For initial use, the radio will carry out a full scan and store the station’s list in memory.
3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. The first station in the list will be selected and broadcast.

Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a stronger signal area.

Selecting another Station
While a program is playing, turn the “-Vol+/OK/Tune” button and choose the other station in the LCD display, then press the “-Vol+/OK/Tune” button to confirm the stations selected.
Station list
All available DAB stations will be listed here. Turn the “-Vol+/OK/Tune” knob to choose a radio station and press “-Vol+/OK/Tune” button to confirm.
Note: If there is a ‘?’ before the name of the radio station, that means that the station is not available in your current location. See Prune invalid.

Scanning Stations
Press and hold Info/Menu button, turn the “-Vol+/OK/Tune” button and choose “SCAN”, then press the “-Vol+/OK/Tune” button to confirm and start scanning all available stations.

Manual tune
This feature allows the user to select a particular channel. Press and hold the Info/Menu button, turn “-Vol+/OK/Tune” button and choose “Manual tune”, then press
“-Vol+/OK/Tune” button to confirm. Then select the particular channel.
Prune invalid
You may remove all unavailable stations from the station list.

1. Press and hold Info/Menu button, turn “-Vol+/OK/Tune” button and choose “Prune invalid”
2. Turn “-Vol+/OK/Tune” button to select ‘YES’, and then press “-Vol+/OK/Tune” button to confirm.

DRC (Dynamic Range Control) value
You can set the compression level of stations to eliminate the differences in dynamic range or sound level between radio stations.

1. Press and hold Info/Menu button, turn “-Vol+/OK/Tune” button to select ‘DRC’, and then press “-Vol+/OK/Tune” button to confirm.
2. Turn “-Vol+/OK/Tune” button to select through ‘DRC high’, ‘DRC low’ or ‘DRC off’, then press “-Vol+/OK/Tune” button to confirm.

Station order
You can choose the order of the DAB station list to be either Alphanumeric or Ensemble.

1. Press and hold Info/Menu button, turn “-Vol+/OK/Tune” button to select ‘Station order, and then press “-Vol+/OK/Tune” button to confirm.
2. Turn “-Vol+/OK/Tune” button to select through ‘Alphanumeric’ or ‘Ensemble’, then press “-Vol+/OK/Tune” button to confirm.

Viewing Station Information
DAB stations broadcast additional information. Press Info/Menu button on the main unit repeatedly to view information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal Quality, Signal Strength, Bitrate, Codec, Channel and Date.

FM Mode

Selecting FM Mode

1. Press Mode button to choose FM Radio.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, press Station button first, then turn “-Vol+/OK/Tune” knob to change the frequency by 0.05MHz.
4. To automatically scan, while FM frequency shows up, press “-Vol+/OK/Tune” knob to search the next available station.

Scan setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak stations.

1. To change the scan settings to stop only at stations with good signal strength, press and hold the Info/Menu button, turn “-Vol+/OK/Tune” knob to select ‘Scan setting’, then press “-Vol+/OK/Tune” knob to confirm.
2. Display will show ‘Strong stations only?’, turn “-Vol+/OK/Tune” knob to select “YES” or “NO” to confirm.

Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio (hiss).

1. To play weak stations in mono, press and hold Info/Menu, turn “-Vol+/OK/Tune” knob to select ‘Audio setting’, and then press “-Vol+/OK/Tune” knob to confirm.
2. Display will show ‘Listen in Mono only?’, turn “-Vol+/OK/Tune” knob to select “YES” or “NO” to confirm.

Preset Operation

Preset Store
Select the station that you wish to store, press Preset 1 – 3 button until the display show “Preset stored”. Or press Preset 4+ button until the display show the preset menu, turn “-Vol+/OK/Tune” knob to select which preset number you wish to store in, then press “-Vol+/OK/Tune” to store the current station.

Preset Recall
To recall Preset station, simply press Preset 1 – 3 button once to recall it. To recall other preset stations, press Preset 4+ button the display will show the preset menu, turn “-Vol+/OK/Tune” knob to select which preset station you wish to recall, then press “-Vol+/OK/Tune” to recall the stored station.

Note: Internet radio and Podcasts share the same preset station number.

Bluetooth Mode

This mode allows you to use the radio as a speaker for an external Bluetooth- compatible device (e.g. mobile phone or MP3 player). The signal is transmitted wirelessly via Bluetooth. Note: Before playback, you must pair the radio (in this case the Bluetooth receiver) and the device (transmitter).

1. Press the power button to turn your radio ON.

2. Press the Mode button to select Bluetooth Audio mode. The device is now in Bluetooth mode.

3. For initial use, to enter the Bluetooth pair mode, press and hold Info/Menu, turn “-Vol+/OK/Tune” knob to select ‘Setup Bluetooth’, and then press “-Vol+/OK/Tune” knob to confirm. You will see “Please connect with a device to: Lenco PIR-645”.
   Note: To quick enter the Bluetooth pair mode, press and hold “-Vol+/OK/Tune” knob, until you see “Please connect with a device to: Lenco PIR-645”.

4. Turn on Bluetooth on your external device.

5. Pair your external device with the ‘Lenco PIR-645’. The devices will now be connected.

6. Play a track on your external device to hear sound.

7. Use the “-Vol+/OK/Tune” on the radio to adjust the volume accordingly.

Note: You may need to adjust sound on your external device as required.

General Operation

Sleep
To set the sleep timer, press and hold Info/Menu button to enter Main Menu > Sleep, rotate and press “-Vol+/OK/Tune” knob to select the sleep time.

Setting Backlight
Press Info/Menu button to enter System Settings> Backlight, press “-Vol+/OK/Tune” knob to confirm. Rotate “-Vol+/OK/Tune” knob to select the backlight setting and press enter to confirm.

Alarm
When device is playing on mains power, to set or change an alarm, press Alarm button, scroll and press “-Vol+/OK/Tune” knob to select alarm number (1/2) then configure the following parameters:

To save these settings and set the alarm, scroll down and select Save. On the battery mode, the device doesn’t support the alarm function.
Note:
If you press Back or Info/Menu button to exit the Alarm settings without saving, a dialogue screen is displayed asking if you wish to save the changes or not.  The screen shows active set alarms with an icon at the bottom left. At the set time, the alarm will sound. To temporarily silence it, press “-Vol+/OK/Tune” knob repeatedly cycles through the snooze periods: 5mins/10mins/15mins/30mins. To cancel a sounding alarm, press Alarm button.
Setting Language
This feature enables you to change menu language. The default menu language is English.

1. Press and hold Info/Menu to enter System Settings> Language, press “-Vol+/OK/Tune” knob to confirm.
2. Scroll and press “-Vol+/OK/Tune” knob to select your language to confirm.

Language| English/German/Danish/Dutch/Finnish/French/Italian/ Norwegian/Polish/Portuguese/Spanish/Swedish/Turkish
---|---

Factory Reset

A factory reset resets all user settings to default values, so network settings, time/date and presets are lost.

1. Press and hold the Info/Menu button to enter System Settings> Factory Reset, press “-Vol+/OK/Tune” knob to confirm.
2. Scroll “-Vol+/OK/Tune” knob to select ‘YES’, and then press “-Vol+/OK/Tune” knob to confirm.

Note: A factory reset clears all user-defined settings, replacing them with the original default values, so time/date, preferences/settings, Network settings, DAB station list and preset stations are all lost.
Software Update
From time to time, we may make software upgrades available with big foxes and/or additional features. You can either check manually or set it to check periodically automatically (default). If the radio detects that newer software is available, it asks of you want to go ahead with an upgrade. If you agree, the new software is then downloaded and installed. After a software upgrade, all user settings are maintained.

CAUTION: Before starting a software upgrade, ensure that the radio is plugged into a stable main power connection. Disconnecting power during a software upgrade may PERMANENTLY damage the radio.

Info
This feature shows details of the current system including

• SW version: Software version number
• Radio ID: Unique code used to identify this particular radio device
• Friendly name: (name by which the radio is identified on a network)

Remote Control

You can achieve the above functions via the remote control which is packed in the packaging.
Unlock App
You can achieve the above functions via the UNDOK app. You should download the UNDOK app on your smartphone first. Then please connect the radio to the same wifi as your smartphone. When you turn on the UNDOK app, you can search your radio on the app. You can control it as you can see the functions on the app.

Specification

2.0A, 10.0W

Li-Battery: 4400mAh 3.7V 16.28Wh (built-in)

Frequency Ranges:| Wifi: 802.11a/b/g/n (2.4Ghz) FM: 87.5-108MHz

DAB/DAB+: Band III, 174.928-239.200MHz

Output Power:| 2 x 3 W rms
Dimension (L x D x

H):

| 261mm x 146mm x 92mm
Working Temperature:| 0 – 35°C

Error messages and Troubleshooting Error messages

filtering enabled on router
Format error| Cannot recognize file format – independent of network| Received .MP3, but found that the stream wasn’t MP3 when

trying to decode

Network error| Problem past router – incorrect data being received from

network

| Data obtained from server is unreadable
Network not

ready

| Problem with connection to

router

| Router switched off
Network timeout| Problem past router – no response being received from

network

| Streaming IR station and suddenly station becomes

unavailable

---|---|---
Service not

available(DAB)

| No DAB reception|
Update failed| Software upgrade failed|

Troubleshooting

a computer and the

router

Router restricts access to listed MAC addresses| Obtain the radio MAC address from Menu>System

settings>Network>View settings

and add to router list

Insufficient Wi-Fi signal strength| Check distance to router, see if a computer can connect to the network in this location
Unknown encryption method| Change encryption method on router. This radio supports WEP,

WPA and WPA2

Unusual network configuration| Setup network manually through Menu>System

settings>Network>Manual

settings

Firewall preventing access| Check the following ports are open on the router:

UDP and TCP port 80 and 123; DNS port 53.

Windows shares: port 135-139

and 445.

Cannot connect to Internet| Internet connection down| Check that Internet is working for a computer connected to the same network
Firewall preventing access| Check the following ports are open on the router:

UDP and TCP port 80 and 123;

DNS port 53.

| | Some Internet radio stations may require additional ports to

be opened.

---|---|---
Cannot play| Station not broadcasting,| Try other stations; try listening
particular| overloaded or insufficient| on computer via Internet radio
Internet radio| bandwidth.| portal website; try later.
station| Station broadcasting using|
| unknown codec.|
| Link out of date|
Information| Value and and precision
---|---
Manufacturers name or trade mark, commercial registration and address| Huazhaoxin Industrial Park B-4/F, Golden Phoenix Industrial Zone, Fenggan Town, Dongguan, Guangdong Province, People’s

Republic of China.

Model Identifier| OBL-0502000E
Input voltage| 100-240V AC
Input AC frequency| 50/60Hz
Output voltage| DC 5.0V
Output current| 2.0A
Output Power| 10.0W
Average active efficiency| 82.1% (230V, 50Hz)
Efficiency at low load (10%)| 76.1% (230V, 50Hz)
No load Power consumption| ≤0.07W

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to a particular situation. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance to any applicable local laws of the requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands declares that this product is in compliance with the essential EU directive requirements. The declaration of conformity may be consulted via [email protected]

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

References

• 📧[email protected]
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>