Lenco TDV1001BK Portable DVD Player Tablet with 10 Inch Touchscreen User Manual

TDV1001BK Portable DVD Player Tablet with 10 Inch Touchscreen
User Manual

TDV1001BK Portable DVD Player Tablet with 10 Inch Touchscreen

User manual Portable DVD player/tablet with 10″ touchscreen
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USII playback function, the USII memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:
    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

WARNING
Classl Laser Product
CLASS 1 LASER PRODUCT APPAREIL A LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1
CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM
This product contains a low power lase device.
Warning: Do not touch the lens
WARNING: When participating in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Power supply adaptor
Manufacturer: SHENZHEN TEKA TECHNOLOGY CO., LTD.
Model number: TEKA012-0502000EU
Use only the power supply listed in the user instructions.

TEKA Technology Co., Ltd. Building A, No.21, Xi-Fu Road, Red Star Community, Song Gang Street, Baan District, Shenzhen, Guangdong Province.
Model Identifier| TEKA012-0502000EU
Input voltage| 100-240V
Input AC frequency| 50/60HZ
Output voltage| 5.0V
Output current| 2.0A
Output Power| 10.0W
Average active efficiency| 83.%
Efficiency at low load (10%)| —
No load Power consumption| 0.06W

Features

Browse the Web
. Visit your favorite websites
Check your e-mail
Keep in touch with friends and family
Watch YoulubeTM videos
Browse the world’s most popular video-sharing community
Read your favorite books Download thousands of books.
Discover thousands of apps for AndroidTM Games, applications, and more with play store (need for customer installed).
Connect to the Internet wirelessly
High-speed Wi-Fi 802.11 b/g/n networking
Enjoy in the comfort of your living room
Enjoy your media library anywhere
Portable powerhouse plays popular music, video, and photo formats MicroSD memory card reader
Increase your storage capacity (up to 32 GB supported)
Automatic orientation detection
Read any way you want; the display adjusts automatically!
Intergrated DVD player
Compatible with DVD, DVD±RW, VCD, CD, CD-R/RW, MP3

Unit at a Glance

1. POWER Press to turn the unit on or off, or to turn the screen on or off.
   a. To turn the unit on, press and hold the power button.
   b. To turn the unit off press and hold the power button to access the Power Off menu, then you can tap “Power off” to turn off the unit.

2. Return Press this button return to the previous page.

3. Home

4. VOL-Decreases the volume.

5. VOL+ Increase the volume.

6. Micro USB Connect to a USB device or a computer to transfer data (e.g. music, videos, photos, files). Or connect the supplied AC adaptor and USB to device and wall outlet for charging.

7. Headphone Audio output connection for headphones.

8. RESET Re-start and reset the unit

9. MIC

10. TF CARD Insert external TF memory cards here.

11. OPEN Switch Open the disc tray

Getting Started

Turning the Tablet on or off
To turn the tablet on: Press and hold the Power key until the LCD screen turns on.
Wait until the home screen appears; the tablet is now ready for use.
To turn the tablet off:

1. Press the Power button for 2-4 seconds.
   Then touch Power off to turn off the device or touch Reboot to restart the device.
   

2. Touch ok the screen to turn off the tablet.

Turning the Screen On or off (Standby)
When the tablet is on, you can turn off the screen to conserve battery power. Simply press the Power key once to turn the screen off. Press the Power key again to turn the screen back on.
To conserve battery power, the screen can be set to turn off automatically when the tablet is not in use (between 1 minute and 30 minutes).
This Screen timeout option can be found in the Display menu.
Unlocking the Screen
When the screen turns off, you will have to unlock the screen when you turn it back on. Swip up to unlock the screen.

About Applications

To open an application, touch the application icon on the home screen or in the Launcher where you can tap the icon right up on the home screen to get in.
Launcher screen: The screen shown above is for illustrative purposes only. Reserves the right to modify and improve the final list of applications available on the tablet.

Preinstalled Applications
Some applications have been installed on your tablet for your convenience. These applications include:
Browse the web.
Perform simple mathematical operations.
Check your e-mail.
Play movies and TV
Access the Settings menu to adjust the tablet’s options.
Access DVD mode

Preinstalled Applications
Installing Applications
You can also download an install additional applications from the device’s applications marketplace, the web browser, or other sources.
The tablet must be set to allow installation of applications from non-Market sources. The Unknown sources option can be set in the Application settings menu.
The Notification bar displays icons that indicate your tablet’s Wi-Fi status.
Notification that an open Wi-Fi network is in range.
Connected to a Wi-Fi network (waves indicate connection strength). [no icon) There are no Wi-Fi networks in range, or the Wi-Fi radio is off.
1. Turn on the Wi-Fi radio if it is not already on.
To turn on Wi-Fi:
a. Go to the Home screen: Press the Home key.
b. Open the Settings menu: Swipe up on the home screen to get into the launcher, then touch Settings icon.
c. Open the Network & Internet, menu: Touch Wi-Fi, Slide the icon to ON status.
When Wi-Fi is on, the tablet will look for and display a list of available Wi- Fi networks.
If a network that you have connected to previously is found, the tablet will connect to it. If you don’t see your network in the list, you can force the tablet to re-scan. To scan for networks, tap the Menu key, and then touch Scan. NOTE: The device can only connect to 2.4 GHz Wi-fi networks

Connect to a Wi-Fi network

2. Select an available Wi-Fi network to connect to:
In the same Wi-Fi settings menu above,touch a network in the list.
If the network is open, the tablet will prompt you to confirm connection to the network.
Touch Connect to confirm.
If the network is secured (as indicated by a Lock icon), the tablet will prompt you to enter a password or other credentials. Touch the Wireless password box to show the on-screen keyboard and then use it to enter the password. Touch Connect to confirm.
When you have successfully connected to a Wi-Fi network, the Notifications bar at the top of the screen will show a Wi-Fi signal indicator.
To learn about how to add a Wi-Fi network when it is not in range or when the router is set to obscure the network name (SSID); or to configure advanced Wi- Fi options, please refer to the manual.

Optional Connections

Connecting to a Computer Connect the tablet to a computer to transfer files.

1. Connect your tablet to the computer.
   With the included USB cable: Plug the small end of the cable into the USB 2.0 high speed connector of the tablet. Plug the large end of the cable into an available USB 2.0 high speed port on the computer.

2. When your tablet is connected, slide down from the top of screen, then touch V, Tap Charging this device via USB.
   

3. Mount the storage.
   Touch “File Transfer” to mount the tablet’s built-in storage.  When it is mounted, you can copy files to or from your tablet.

DVD mode
Slide the OPEN switch to open the disc cover.
Load the disc to the disc tray.
Close the disc cover. Go to Lancer screen, then tap DVD icon to playback the disc.
During disc playback,1–18 icons will appear.

1. Exit Exit the DVD APR

2. Go to previous chapter/track to the beginning.

3.   Press BUTTON allow skipping back at S-level speed (X2->X4->X8->X16->X32->PLAY), press PLAY button return to normal playback.

4. Play or pause the disc playback.

5. Press BUTTON allow skipping ahead at S-level speed (X2->X4->X8->X16->X32->PLAY), press PLAY button return to normal playback.

6. Go to next chapter/track.

7. Stop Stop playing a disc.

8. VOL -Decreases the volume.

9. VOL + Increase the volume.

10. OK/Up Down/Left/Right

11.  0-9 NUM KEY

12. REPEAT Press REPEAT during playback to select a desired repeat mode.
    DVD: you can play select repeat chapter/title/all.
    CD/VCD: you can select repeat track/all.
    Mp3: you can select repeat shuffle/single/repeat one/repeat folder/folder.

13. MENU Return to DVD root menu. (DVD) Return to VCD PBC menu. (VCD)

14. TITLE Return to DVD title menu

15. Subtitle Select a subtitle language programmed on a DVD(if available)

16. Audio Select one of the audio sound tracks on a DVD (if more than one is available) or select the audio output mode on a CD.

17. DISPLAY To display the playtime and status information.

18. ZOOM DVD/VCD: Use ZOOM to enlarge or shrink the video image.
    1. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture.
    2. Each press of the ZOOM button changes the TV screen in the following sequence 2xsize 3xsize 4xsize 1/2size 9 1/3 size 4 1/4size 4 normal size JPEG: Use ZOOM to enlarge or shrink the picture.
    1. Press ‘ZOOM’.
    2. Used  to enlarge, or “ ” to shorten the picture. Use  the button to move through the zoomed picture.

19. ANGLE DVD: Press ANGLE will change the view angle, on DVDs that support this feature.

Mounting the DVD in a Car

Use the supplied mounting kit to install the DVD players on the back of the vehicle’s headrests.

1. Align the angled support’s bolt to the screw hole on the back of the DVD unit. Turn the bolt clockwise and secure the support.

2. The headrest off its leg supports. Align the horizontal support with the headrest leg slots and ensure the horizontal support rests securely on the top of the car seat. Reach the headrest.
   Remark: if the legs of the headrest are too thick for the opening of the horizontal support bar of the bracket, please unscrew the 4 screws of the support bar of the bracket to adjust the opening. In case the screws are too short, use the longer screws (provided in the giftbox).
   

3. Grip the DVD firmly with both hands and slot the angled support firmly into the support bar. It will click. Ensure the entire unit is secure.

4. Adjust the angle of the DVD unit, then secure by tightening the bolt on the right.

5. To remove the DVD from the horizontal support bar, support the DVD unit with one hand. With the other hand, firmly squeeze the release buttons either side of the angled support and pull.

• This unit should never be used by the vehicle’s driver or left unsecured in the vehicle while driving.
• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct any safety device, including air bags or seat belts.
• All passengers should wear seat belts when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.

Specifications

Tablet:

(max.32GB supported)
Display| 10″ IPS LCD (800X1280), Capacitive touch screen
Wi-Fi Networking| IEEE 802.11 b/g/n
BT| 4.0 (BT not available in DVD mode)
Audio Output| 3.5 mm headphone
PC Interface| USB 2.0 high speed
Additional Features| Built-in microphone 2×1.5W speaker
Decoding Format| JPG, PNG, GIF, BMP.
3PG, MP4, AV], WV, MKV.
MP3, WAV AAC M4A, AMR, APE, FLAG, MID, OGG
Operating System| Android”‘ 10.0 Go
Power| Mains adapter output: 5V = 2.0A Rechargeable Li-poly battery
Playback Time
(hours)| Up to 5 hours music,
2 hours video,
3 hours web browsing

DVD:

Features and specifications are subject to change without prior notice.

1. Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important not e: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
2. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.
3. Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
4. CE Marking
** Hereby, Lenci Benelux B.V., Thermostat la, 6361 HB Knuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements. The declaration of conformity may be consulted via techdo@commaxxgroup.com
5. Service**
For more information and helpdesk support, please visit www.lenco.com
Lenci Benelux BV, Thermostat la, 6361 HB, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>