Lenco CD-400GY Discman with DAB FM Radio User Manual

Lenco CD-400GY Discman with DAB FM Radio

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:

    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

    • Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitudes during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

WARNING

• Class 1 Laser Product

Warning: Do not touch the lens.

• WARNING: When participating in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars.
• WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.

ACCESSORIES

TOP and SIDE

1. PHONES OUT
   Connect to the external earphone

2. BBS ON / OFF
   Bass boost sound ON / OFF switch

3. VOLUME +
   Increase the volume

4. VOLUME –
   Decrease the volume

5. LCD DISPLAY
   Display the unit operation status and information

6. DAB+: Press to display the next station information
   FM: Short press to change the frequency, step up 0.05MHz. Press and hold to scan a higher frequency available station
   CD: Press to search to the next track

7. DAB+: Press to display the previous station information
   FM: Short press to change the frequency, step down 0.05MHz. Press and hold to scan a lower-frequency available station
   CD: Press to search to the previous track

8. MENU / INFO

   • DAB+ / FM: Press to display station information. Press and hold to enter the Menu for setting change

9. P-MODE / PRESET

   • DAB+ / FM: Press to recall a preset station. Press and hold to store a preset station
   • CD: Press to select different play modes

10. SOURCE
    Press it to choose different modes: DAB+ / FM / CD

11. ON / SCAN / PLAY/PAUSE

    • Standby or OFF mode: Press and hold to turn on the unit
    • DAB+: Press and hold to start auto-scanning all the available DAB+ stations
    • FM: Press and hold to start auto-scanning all the available FM stations
    • CD: Press to toggle between pause and resume playback

12. OFF / ENTER / STOP

    • On mode: Press and hold to turn the unit into standby mode (with display of time and date). Press and hold again will turn the unit to the OFF mode for power saving (without display)
    • DAB+ / FM: Press to select the change setting in the menu operation
    • CD: Press to stop the playback

13. CD DISC COMPARTMENT DOOR

14. USB-C 5V IN
    Connect to an external USB AC/DC adaptor (not supplied), DC 5V 1000mA

15. CD DOOR OPEN SLIDE SWITCH
    Slide to eject the CD compartment door
    BOTTOM

16. HOLD ON / OFF SLIDE SWITCH Slide to ON position will display all the buttons locked symbol. To release the button lock, slide it to OFF position

CHARGING THE UNIT
Before using, it is recommended to charge unit for at least 2 hours. During charging, there is a charging symbol shown on the display.

BASIC OPERATION
Connect the earphone (included) into the PHONES OUT on the side of the unit.

AC/DC Adaptor (Not Supplied) Operation
Press and hold the ON button to turn on the unit. To turn off to the Standby mode (with display of time and date), press and hold the OFF button.

Built-in Battery Operation (AC/DC Adaptor NOT Connected)
Press and hold the ON button to turn on the unit. To turn off the Standby mode (with display of time and date), press and hold the OFF button. Press and hold the OFF button again will turn the unit to the OFF mode for power saving (without display).

DAB+ / FM / CD
Press the SOURCE button to select between different sources.

Volume Control
Press the VOLUME + / – button to change the volume. This CD player has a hearing protection and will limit the volume and give you a warning when the volume becomes too high; you have to press the ENTER (12) button to confirm that you want to increase the volume, then press the VOLUME + (3) button to increase the volume level.

Adjusting the DAB+ / FM Reception
The earphone wire serves as the antenna. Therefore fully extend the earphone wire and place the unit to a location to ensure a good DAB+ / FM reception.

DAB+ OPERATION
The first time in the DAB+ mode, it will automatically scan for available DAB+ stations. Wait until the scanning has finished. The display will show the scanning progress. After scanning it will tune to the first station.

Auto Scan

1. Turn on the unit in DAB+ mode.
2. Press and hold the SCAN button to start auto-scanning the available stations.

Manual Scan
By using the manual scan operation, it can help you to adjust the unit position or search station that is missed while auto scanning.

1. Turn on the unit in DAB+ mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “Manual tunel” is displayed and then press the ENTER button.
4. Press the button to select the desired channel (5A 13F).
5. Press the ENTER button to confirm. Adjust the unit position for the best reception if necessary.
6. To select another channel (5A 13F), press the or button and then press the ENTER button to confirm.
7. When the station is found, press the  ENTER button to select.
8. To quit manual scan, press the MENU button repeatedly.

Tuning
After scanning all the available DAB stations, press the button to display and navigate the station list. Then press the ENTER button to tune to this station within a few seconds.

Storing DAB+ Presets
You can save up to 30 DAB+ stations.

1. Tune to the station you wish to store.
2. Press and hold the PRESET button, “Preset Store” will be displayed.
3. Press the button to select the desired preset number to store.
4. Press the ENTER button to store.

Recall Stored DAB+ Presets

1. Press the PRESET button, “Preset Recall” will be displayed.
2. Press the button to select the desired preset number to recall.
3. Press the ENTER button to recall.

Displaying DAB+ Station Information
There are several types of information provided by the radio station. To display the information, press the INFO / MENU repeatedly.

OTHER DAB+ MENU OPERATION
Press and hold the MENU button to access the menu control. Then press the button for different options as described below.

Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to this level.

There are three levels of compression:

• DRC high: Maximum compression as sent with the transmitted service
• DRC low: Set to 1/2 that of the sent transmitted service
• DRC off: No compression

1. Press and hold the MENU button to access the menu control.
2. Press the button until “DRC” is displayed and then press the ENTER button.
3. Press the button to select the DRC value and then press the ENTER to confirm.
4. Press the MENU button repeatedly to exit the menu control.

Note

• Not all DAB+ broadcasts can use the DRC function. If the broadcast does not support DRC then the DRC setting in the unit will have no effect.
• After you have adjusted the DRC level the sound may be louder.

Prune
This function removes invalid stations.

1. Press and hold the MENU button to access the menu control.
2. Press the  button until “Prune” is displayed and then press the ENTER button.
3. Press the button to select “Yes” and then press the ENTER button to prune the unit.
4. Press the MENU button repeatedly to exit the menu control.

FM RADIO OPERATION

Auto Scan

1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto scanning and saving the available stations (max. 30 storage).

Manual Scan

1. Press the button repeatedly to tune to a different frequency, 0.05MHz per step.
2. Alternatively press and hold the button to automatically search to the next available station.

Storing FM Presets
You can save up to 30 FM stations.

1. Tune to the station you wish to store.
2. Press and hold the PRESET button, “Preset Store” will be displayed.
3. Press the  button to select the desired preset number to store.
4. Press the ENTER button to store.

Recall Stored FM Presets

1. Press the PRESET button, “Preset Recall” will be displayed.
2. Press the button to select the desired preset number to recall.
3. Press the ENTER button to recall.

Displaying FM Station Information
There are several types of information provided by the radio station. To display the information, press the INFO / MENU repeatedly.

FM MENU OPERATION

Press and hold the MENU button to access the menu control. Then press the button for different options as described below.

Scan Setting

1. Press and hold the MENU button to access the menu control.
2. Press the button until “Scan setting” is displayed and then press the ENTER button.
3. Press the button to toggle between “Strong stations only” and “All stations”. Press the ENTER button to confirm. When the “Strong stations only” is selected, scanning will ignore the noisy stations and only capture the strong stations. When “All stations” is selected, all possible stations will be captured during scanning even if it is a bit noisy.
4. The next time doing the scanning the unit will search for the stations based on this scan setting.

CD OPERATION

Loading and Playing CD Disc
Open the CD door. Install a disc with the CD label side facing up. Close the CD door. Press the SOURCE button to CD mode. After reading, it will automatically start to play.

Play/Pause Control
To pause playback press the PLAY/PAUSE button. Press the button again to resume playback.

Stop Control
To stop playback press the STOP button.

Skip Track
During playback press the button to skip to the previous or next track.

High Speed Music Search
During playback press & hold the button to start high speed searching. When you release the button normal speed playback will resume.

Repeat Play / Random Play CD Disc mode

• During playback press the P-MODE button once, the display shows “REP 1”. The current track will be played repeatedly.
• When pressing the P-MODE button again, the display shows “REP ALL”. All tracks will be played repeatedly.
• When pressing the P-MODE button again, the display shows “RANDOM”. All tracks will be played in random sequence.
• When pressing the P-MODE button again, the display shows “INTRO”. All tracks will be played for a few seconds only at the beginning.
• When pressing the P-MODE button again, the unit will resume to normal playback.

MP3 Disc

• During playback press the P-MODE button once, the display shows “REP 1”. The current track will be played repeatedly.
• When pressing the P-MODE button again, the display shows “REP ALL”. All tracks will be played repeatedly.
• When pressing the P-MODE button again, the display shows “REP DIR”. All tracks in the current folder will be played repeatedly.
• When pressing the P-MODE button again, the display shows “RANDOM”. All tracks will be played in random sequence.
• When pressing the P-MODE button again, the display shows “INTRO”. All tracks will be played for a few seconds only at the beginning.
• When pressing the P-MODE button again, the unit will resume to normal playback.

Programmed Playback CD Disc Mode Programming Playback
This unit can be programmed to play a sequence of tracks selected.

1. In stop mode press the P-MODE button, the display shows the program number “P01” and the flashing track number.
2. Press the button to select the desired track.
3. Press the P-MODE button to save the desired track.
4. Repeat steps 2-3 to program up to 20 programmed tracks.
5. Press the PLAY/PAUSE button to start playing the programmed tracks.
6. To clear the program play, press the STOP button twice or change to another mode.
7. During program play you can also do the “Repeat One” or “Repeat All” operation, however, intro and random play is not supported.

MP3 Disc Mode Programming Playback

1. In stop mode press the P-MODE button, the display shows the program number “P01” and the flashing folder/track number.
2. Press the button to select the desired track.
3. Press the P-MODE button to save the desired track.
4. Repeat steps 2-3 to program up to 99 programmed tracks.
5. Press the PLAY/PAUSE button to start playing the programmed tracks.
6. To clear the program play, press the STOP  button twice or change to another mode.
7. During program play you can also do the “Repeat One” or “Repeat All” operation, however intro and random play is not supported.

Note:

• Besides playing CDDA audio disc, the unit can also play MP3 file. However, WMA file and others are not supported.
• Folders or file numbers on the disc that exceed the supported limit of this product cannot be played.

Resume Playback
After pressing the STOP button to stop the playback, press the PLAY/PAUSE button will continue playback from where you have stopped.

ANTI-SHOCK PROTECTION
The unit has an electronic anti-shock protection function to prevent any interruption of the sound output when the unit is subjected to shock or vibration during disc playback. The unit’s internal buffer can provide typically 45 seconds when playing a CDDA disc and typically 120 seconds when playing a CD MP3 disc of protection against interruption of sound output. If the player is subjected to shock or vibration for a longer time than the buffer is full, some interruption of sound output will occur. This is normal. The sound will resume once the unit is stabilized from the shock or vibration.

Note

• The anti-skip function provides for continuous sound output when the unit is subjected to shock or vibration. It will not compensate for errors arising from the use of defective, scratched or dirty discs.

BBS
You can enhance the bass effect of the music. Pressing the BBS button will toggle the bass boost between ON and OFF.

BUTTON HOLD FUNCTION
To avoid any accidental button press during operation, the unit has a function of button hold. When the unit is turned on, set the HOLD SWITCH to ON position. Locked symbol will be shown on the LCD display. To release the button lock, slide it to OFF position

SYSTEM MENU OPERATION
Press and hold the MENU button to access the menu control. Press the button until “System” is displayed and then press the ENTER button. Press the button for different options as described below.

Time Setup
This setup allows you to set up 4 different display modes. They are:

• Set Time/Date
• Auto update
• Set 12/24 hour
• Set date format

Set Time/Date

1. Turn on the unit in DAB mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “Time” is displayed and then press the ENTER button.
5. Press the button until “Set Time/Date” is displayed and then press the ENTER button.
6. Hour digits will be flashed. Press the button to change to hour value and then press the ENTER button.
7. Minute digits will be flashed. Press the button to change to minute value and then press the ENTER button.
8. If 12 hour display is set, “AM or “PM” will be flashed. Press the button to set AM or PM and then press the ENTER button to confirm.
9. Then the unit will request to set the date. Follow the similar procedures as listed above to complete the setup of day, month and year.
10. Press the MENU button repeatedly to exit the menu control.

Auto Update

1. Turn on the unit in DAB mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “Time” is displayed and then press the ENTER button.
5. Press the button until “Auto update” is displayed and then press the ENTER button.
6. Press the button to change between
   • Update from Any: Time and Date will be updated by either DAB or FM broadcast
   • Update from DAB: Time and Date will be updated by DAB broadcast only
   • Update from FM: Time and Date will be updated by FM broadcast only
   • No Update: Time and Date will never be updated by broadcast
7. Select your desired and then press the ENTER button to confirm.
8. Press the MENU button repeatedly to exit the menu control.

Set 12/24 Hour Display

1. Turn on the unit in DAB mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “Time” is displayed and then press the ENTER button.
5. Press the button until “Set 12/24 hour” is displayed and then press the ENTER button.
6. Press the button to toggle between 12 or 24-hour display. Select your desired and then press the ENTER button to confirm.
7. Press the MENU button repeatedly to exit the menu control.

Set Date Format

1. Turn on the unit in DAB mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “Time” is displayed and then press the ENTER button.
5. Press the button until “Set date format” is displayed and then press the ENTER button.
6. Press the button to toggle between “DD MM YYYY” or “MM DD YYYY” date display. Select your desired and then press the ENTER button to confirm.
7. Press the MENU button repeatedly to exit the menu control.

Language Setup
You can set the language of the unit.

1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “Language” is displayed and then press the ENTER button.
5. Press the button to toggle between different languages. Select your desired language and then press the ENTER button to confirm.
6. Press the MENU button repeatedly to exit the menu control.

Software Version Check
You can check the software version of the unit.

1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the button until “SW version” is displayed and then press the ENTER button to show the software version number.
5. Press the MENU button repeatedly to exit the menu control.

Factory Reset
This function resets the unit to the original factory settings.

1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the button until “System” is displayed and then press the ENTER button.
4. Press the  button until “Factory Reset” is displayed and then press the ENTER button.
5. Press the button until “Yes” is displayed and then press the ENTER button to reset the unit.

BATTERY LEVEL SAVING
In order to save the battery consumption, the unit in CD mode pause or without playback for 1 minute will automatically turn off to the standby mode.

Trouble Shooting

No power

• Ensure that the unit is switched on and the battery is fully charged.

No sound output

• Turn up the volume.

Disc in place but the unit won’t play

• Ensure that the disc label is facing up.
• Ensure that the disc is clean.
• PAUSE mode may be activated, deactivate it.
• The disc may be damaged or dirty; check and clean the disc.

DAB+/FM reception

• Ensure the earphone (antenna) wire is fully extended.
• Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers).

Sound interference coming from the earphones

• Move any wireless devices (mobile phone, bluetooth device etc.) away from the unit.

TECHNICAL SPECIFICATIONS

• DAB+ radio frequency range
  • 174.928 – 239.2 MHz
• FM radio frequency range
  • 87.5 – 108 MHz
• USB-C DC power input for charging
  • 5V DC, 1000mA
• Anti-Shock protection
  • 45 sec typical for CDDA, 120 sec typical for CD-MP3
• Battery
  • Built-in Lithium-ion rechargeable battery 3.7V 1000mAh
• Earphone out
  • 3.5mm stereo jack
• Operational temperature
  • 0ºC – +40ºC
• Unit dimension (L x D x H)
  • 143 x 143 x 30 mm
• Total weight
  • 0.24 kg
• The specification is presented only as a reference. The values of weight and size are approximations.
• Our product is improved ceaselessly and the specification and function may be changed without prior notice.

GUARANTEE

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

• Important note : It is not possible to send products that need repairs to Lenco directly.
• Important note : If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

DISCLAIMER
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situations. No legal right or entitlements may be obtained from the description made in this manual.

DISPOSAL OF THE OLD DEVICE

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance to any applicable local laws of the requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type [Lenco CD-400] complies with directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
https://commaxx-certificates.com/doc/cd-400_doc.pdf

SERVICE
For more information and helpdesk support, please visit www.lenco.com Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>