BROAN 90291-WI-01 NuTone SurfaceShield LED Module Instruction Manual
- June 6, 2024
- Broan
Table of Contents
SurfaceShield™
LED Module
Operating Instructions
EPA EST Broan
90291-WI-01
Register this product at www.broan-nutone.com/register. For Warranty Statement, or to order Service Parts: go to www.broan-nutone.com and type the Model in the “Model Search” field at the top of the page. Broan, 926 W. State Street, Hartford, WI 53027 800-637-1453 For installation instructions, refer to the product installation instructions.
READ AND SAVE THESE INSTRUCTIONS
WARNING
- Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.
- Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
- Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
CAUTION
- Please read specification information on product for further information and requirements.
OPERATION
The SurfaceShield LED module comes with two light modes, white light mode and SurfaceShield mode. White light mode is a standard white LED light and the SurfaceShield mode uses an advanced light mode designed by Vyv ™.
- To manually enter SurfaceShield mode: Flip the light switch ON-OFF-ON within 10 seconds.
- To automatically enter SurfaceShield mode: Leave the white light mode ON, and the SurfaceShield mode will automatically come ON after approximately 1 hour.
- To enter white light mode: Flip the switch to the ON position. If the light is in SurfaceShield mode, flip the switch OFF-ON to enter white light mode.
Notes:
- For maximum effectiveness, the LED module shall remain active in SurfaceShield mode at all times (24 hours a day recommended).
- Surfaces within 5 feet of direct light will be impacted the most from SurfaceShield mode.
- Once the LED module is in SurfaceShield mode, it will not turn off until the switch is turned OFF.
- SurfaceShield™ technology with Vyv™ antimicrobial light technology prevents mold, mildew, and bacteria growth.
- For detailed information regarding this product’s performance go to broan-nutone.com.
1102279B
References
- Broan-NuTone | Better Air. Better Life.
- Broan-NuTone - Residential exhaust ventilation and air quality products
- Broan-NuTone | Better Air. Better Life.
- Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>