WYZE WE1BLK True Wireless Earbuds User Guide

WYZE WE1BLK True Wireless Earbuds

WELCOME TO WYZE
Thanks for getting your hands on a shiny new pair of Wyze Buds. If this is your first Wyze product, welcome to the Wyze fomily!

IN THE BOX

GET STARTED

1.  Download the Wyze App and sign in or create on account.
2. Open the Wyze App. Tap the + plus sign, then Add Device. On the Add Device screen, top Lifestyle then Wyze Buds. Follow the instructions in the App to complete setup.
3. You’re all set. Enjoy your Wyze Buds!

FIT
Place the earbuds into your ears and twist forward slightly until it feels secure. Try different sizes of ear tips to find the best fit.

AMBIENT SOUND
Top and hold the touch oreo to toggle on/ off Ambient Sound to hear your surroundings.

PAIR BLUETOOTH

Place the earbuds in the charging case and leave the case lid open. Press the Bluetooth Pairing button on the back of the charging case until the LED light inside the case starts blinking.

CONTROL MUSIC, CALLS, VOICE

ASSISTANT
Check the Wyze App for detailed instructions on how to control your Wyze Buds.

BATTERY STATUS
Place the earbuds in the charging case. The lights on the case indicate the battery levels for both the earbuds and the case.

CHARGING
Your earbuds charge whenever they’re in the charging case. 15 minutes in the case provides up ta 2 hours of listening time. Charge the case via the USB-C charging cable included.

FACTORY RESET

• Place the earbuds in the charging case and leave the case lid open.
• To factory reset the eorbuds, press and hold the Bluetooth Pairing button on the back of the case for 15 seconds.
• To clear the Bluetooth device list without resetting the earbuds, press and hold the Bluetooth Pairing button on the back of the case for B seconds.

FCC WARNING

This device complies with port 15 of the FCC Rules. Operation is subject ta the following two conditions:

1. This device moy not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operote the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operote the equipment.

The device hos been evaluated to meet general RF exposure requirement. FCC ID:2AUIUWE1BLK
WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.co.gov.

High or low extreme temperatures that o battery con be subjected to during use, storage and low air pressure at high altitude, see below:

• Earbuds battery
  Standard environmental condition: Temperature 25 ± 3°C, Humidity 45-85%RH;

• Operating temperature:
  Charging O – 45°C, Discharging -20°C – 60°C; Humidity 65±20%RH

• Storage temperature:
  -2o·c – 45″C, Humidity 65±20%RH

• Charging case battery
  Standard environmental condition: Temperature 25 ± 3°C, Humidity 45-85%RH;

• Operating temperature:
  Charging O – 45’C, Discharging -10°c – 55°C;

• Storage temperature:
  0 – 45°C < 1 month, 0 – 35°C < 6 months Do not listen to audio at high volume levels for long periods of time. Doing so may damage your hearing. Do not use in temperatures greater thon 104 °F (40°CJ.

ATTENTION
Risk of explosion if the battery is replocad by an incorrect type. Replacement of a battery with an incorrect type con defeat a
safeguard; Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure may result in on explosion or the leakage of flommoble liquid or gos batteries (battery pack or batteries installed) shall not be exposed to excessive heat such os sunshine, fire or the Ike. Attention should be drawn to the environmental aspects of battery disposal.

SPECIFICATIONS

• Product Name:
  Wyze Buds

• Model:
  WE1BLK

• Product Size:
  57mm(H)x27mmlW)x44mm(T)

• Product Weight:
  0.291b (130g)

• Power:
  500mAh DC 3.7V

• Operating Temperature:
  32° F -104°F (0°C -40°C)

• Operating Humidity:
  585%RH

• Warronty information:
  12-month limited warrantyers.

The Bluetooth® word mark and logos ore registered trademarks owned by Bl uetooth SIG, Inc. and any use of such marks by Wyze Lobs, Inc. is under license. Other trademarks and trade names are those of their respective owners.

NEED HELP?
Contoct our Support Team:
https://wyze.com/support
Join our Community:
https://wyze.com/community

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>