H Koenig plx1032 Gas Plancha 3 Burners Instruction Manual

: June 12, 2024
: H Koenig

Table of Contents

WARNING FOR YOUR SAFETY USE OUTDOORS ONLY.
TECHNICAL INFORMATION
Assembly Instruction
INSTRUCTIONS FOR USE
LIGHTING YOUR PLANCHA
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
CLEANING AND CARE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

plx1032 Gas Planchet 3 Burners
Instruction Manual

H Koenig plx1032 Gas Plancha 3 Burners Gas planchet 3 burners https://www.hkoenig.com/s/46490_351549_plancha-au- gaz-3-bruleurs

WARNING FOR YOUR SAFETY USE OUTDOORS ONLY.

Read this instruction carefully and ensure that your planchet is properly installed, assembled, maintained and serviced in accordance to these instructions. Failure to follow these instructions may result in serious bodily injury and/or property damage. If you have any questions concerning the assembly or operation of this planchet, please consult your dealer, your gas supplier, the manufacturer or agent.
Notes to the user:
“USE OUTDOORS ONLY”.
“READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE”.
“WARNING: ACCESSIBLE PARTS MAY BE VERY HOT, KEEP YOUNG CHILDREN AWAY”.
“DO NOT MOVE THE APPLIANCE DURING COOKING”.
“RETAIN FOR FUTURE REFERENCE”.

TECHNICAL INFORMATION

Appliance Name	Gas Planchet		Pin No.

IMPORTANT:
Read the following instruction carefully and be sure your planchet is properly installed, assembled and cared for.
Failure to follow these instructions may result in serious bodily injury and/or property damage.
If you have any questions concerning assembly or operation, consult your dealer or LPG Company.
The appliance and cylinder must be placed on level surface and must not be used whilst alight.
Changing the gas cylinder shall be carried out away from any source of ignition.
Recommend to use the protective gloves when handling particularly hot components.
The parts sealed by the manufacturer or his agent shall not be manipulated by the user.
NOTE FOR CONSUMER: Retain for future Reference.
Read all instructions carefully.
This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
Close supervision is necessary when an appliance is used by children or in the presence of or near children.
The appliance should never be left unattended during use.
Surfaces can become hot during use.
Keep young children away.
Place the appliance on a stable, dry surface, slightly away from the edge and more than 1 m away from any wall or heat-sensitive parts.
This appliance is intended for domestic and outdoor use only.
Use this product out of the wind.
Do not use the appliance for purposes other than those for which it is intended.
The appliance must not be moved during operation.
The use of accessories not recommended by the appliance manufacturer may damage the appliance and cause accidents.
Parts protected by the manufacturer or his authorised representative must not be handled by the user.
Do not touch hot surfaces.
Do not handle the appliance when it is hot.
Allow the appliance to cool down before handling or cleaning it.
Do not clean the appliance with a high or low pressure water jet.
Do not use chlorinated products to clean stainless steel.
This appliance should be kept away from flammable materials.
If there is a smell of gas, close all taps.
Never use an appliance that is leaking.
Any modification of the appliance may be dangerous.
Do not use an adjustable pressure regulator.
The underside of the appliance must be kept ventilated to allow good air circulation in the room.
Do not block the ventilation holes in the chassis.
Caution: Do not insert aluminium foil or any other material or object between the plate and the frame (ventilation area).
Do not block the ventilation holes in the bottom plate under the frame.
In the event of a malfunction, examination and repair must be carried out by an authorised technician.
Caution: Do not use this appliance with charcoal or any other combustible material.
energy source other than that for which it is intended (gaseous energy).
Close the gas tank valve after use.
Caution: No combustible material may be within 1 m of the planchet.
When not in use, store it in a dry place.
We advise you to keep the original packaging when storing the appliance.
Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:

in staff kitchen areas in shops, offices and other professional environments,
in farm hostels,
by guests in hotels, motels and other residential environments,
in bed and breakfast type environments.

USE AND CHARACTERISTICS
The planchet is safe and easy to use. The specified gases for use are butane at 28 to 30 mbar, propane at 37 mbar, butane/propane mixtures at 30 mbar, butane/propane mixtures at 37 mbar and butane/propane mixtures at 50 mbar. Please ensure you only use your planchet at the correct pressure the appliance is designed for.
With a grease cup above the control panel.
Adequate ventilation is vital for combustion and efficiency performance of the planchet. This will ensure the safety of the user and other people in the vicinity of the area where the appliance is being used. Never use the appliance in any enclosed covered area.
When the wind speed is above 2m/s, don’t use gas planchet facing to the wind.
The appliance is designed for use outdoors only.
Do not modify the appliance.
Warning! Accessible parts may be very hot. Keep young children away.
Read the instructions before using the appliance.
Do not move the appliance while in use.
Turn off the appliance at the gas cylinder valve or the regulator after use.
Any modification to the appliance may be dangerous and may cause injury or property damage.
Any unauthorised modification of the appliance will invalidate the guarantee on this appliance.
This appliance must be kept away from flammable materials during use.
The appliance must not have any overhead obstruction. E.g. trees, shrubs, lean to roofs. The appliance must be installed with a clearance of 1M around the appliance.
The appliance must not be used near flammable materials. (Petroleum based products, thinners or any other solid object that carries a flammable warning label.)
The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.
Exploded View:

H Koenig plx1032 Gas Plancha 3 Burners - Exploded View

Assembly Instruction

STEP 1

H Koenig plx1032 Gas Plancha 3 Burners - Assembly

STEP 2

H Koenig plx1032 Gas Plancha 3 Burners - Assembly1

STEP 3

H Koenig plx1032 Gas Plancha 3 Burners - Assembly2

STEP 4

STEP 5

INSTRUCTIONS FOR USE

Follow these instructions carefully to avoid seriously damaging your planchet and causing injury to yourself and to property.

Assemble the planchet by following the assembly instructions carefully.
Connect the gas hose to the planchet. Connect the regulator to the hose.
Connect the regulator to the cylinder valve following the regulator instructions supplied with the regulator.
Turn all of the control knobs to the ‘OFF’ position before turning on the gas supply to the appliance.
Operate the regulator in accordance with the instructions supplied with the regulator.

LIGHTING YOUR PLANCHA

Lighting Instructions:

Connect the gas cylinder to the planchet following the instructions supplied with the regulator.
Turn all the control knobs to the ‘OFF’ position.
Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator connection and operating instructions. Check the cylinder to regulator connection and hose to plancha hose inlet connection for leakage using soapy water. Any leakage will show as bubbles in the area of the leak. If leak is found, do not use the planchet. Consult your gas or planchet supplier for advice.
To light the left hand burner, push down and turn the left burner control knob anti-clockwise to the 90° position (full rate position). An audible click will be heard, this should light the burner. Check that the burner is alight. If the burner has not lit, repeat this process.
If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before retrying the ignition sequence.
When the burner has lit, the burner rate can be adjusted by push down and turn the knob anticlockwise to any position between the full and low rate position.
Light the remaining burners from left to right in sequence.
To turn ‘OFF’ the planchet, turn the cylinder valve handle or regulator switch to the ‘OFF’ position by following the regulator instructions. Once the burners have extinguished turn all the control knobs to the ‘OFF’ position.

Warning: If any burner fails to ignite, turn the control knob off (clockwise) and also turn the cylinder valve off. Wait five minutes before attempting to relight with ignition sequence.
After use, close the gas supply by either turning ‘OFF’ the switch on the regulator or turning ‘OFF’ the cylinder valve.
In the event of light back whilst the appliance is in use. Turn all the controls, cylinder valve and regulator switch to the ‘OFF’ position. Wait 5 minutes before attempting to relight the appliance. If the problem persists after relighting, consult your gas dealer, or the store where you purchased the planchet, or a qualified gas engineer for assistance or repair. Never try to rectify the problem yourself as this could result in serious injury and/or property damage.
Clean the appliance of excess fat, before storage, with a damp cloth using a mild detergent solution as the cleaning agent.
Store the appliance in a clean dry environment.
Do not store your gas cylinder indoors. Store in a well ventilated area away from direct sunlight.

CONNECTING THE GAS CYLINDER TO THE APPLIANCE

This appliance is only suitable for use with low-pressure butane or propane gas and fitted with the appropriate low-pressure regulator via a flexible hose. The hose should be secured to the regulator and the appliance with hose clips/nuts. This planchet is set to operate a 28 mbar regulator with butane gas, and a 37mbar regulator with propane gas, and a regulator with butane/propane mixture at 37mbar, and a regulator with butane/propane mixture at 50mbar and a regulator with butane/propane mixture at 30mbar. Use a suitable regulator certified to BSEN 16129: 2013. Please consult your LPG dealer for information regarding a suitable regulator for the gas cylinder.
BEFORE USE PLEASE CHECK FOR LEAKAGE!
Never check for leaks with a naked flame, always use a soapy water solution.
TO CHECK FOR LEAKS
Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3 parts water.
Ensure the control valve is “OFF”.
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections are secure then turn ON the gas.
Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak, which must be rectified before use.
Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
If detected leakage can not be rectified, do not attempt to cure leakage but consult your gas dealer.
In the event of gas leakage, turn off the gas supply.
REGULATOR AND HOSE
Use only regulators and hose approved for LPG at the above pressures (See page 2). The life expectancy of the regulator is estimated as 10 years. It is recommended that the regulator is changed within 10 years of the date of manufacture.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before operating the plancha.
The hose used must conform to the relevant standard for the country of use. The length of the hose must be 1.5 meters (maximum). Worn or damaged hose must be replaced. Ensure that the hose is not obstructed, kinked, or in contact with any part of the planchet other than at its connection.
The hose should comply with the standard EN16436.
The hose should not be twisted or kinked when attached to the gas cylinder.
Flexible metal or rubber pipe, used to connect the appliance with the LPG cylinder must be changed within the prescribed intervals and according to the National Rules in force.
No part of the hose should touch any part of the appliance.
STORAGE OF THE APPLIANCE
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance. When the appliance is not to be used for a period of time it should be stored in its original packaging in a dry dust free environment.
GAS CYLINDER
The appliance can be used with any gas cylinder of weights between 4.5KGS and 15 KGS butane and 3.9 KGS to 13 KGS propane. The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder must be disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must never be stored where temperatures can reach over 50°C.
Do not store the cylinder near flames, pilot lights or other sources of ignition. DO NOT SMOKE.

CLEANING AND CARE

CAUTION: All cleaning and maintenance should be carried out when the planta is cool and with the fuel supply turned OFF at the gas cylinder.
Recommend to clean and maintenance the appliance at least once a month.
CLEANING
“Burning off” the planchet after every use (for approx. 15 minutes) will keep excessive food residue to a minimum.
OUTSIDE SURFACE
Use mild detergent or baking soda and hot water solution.
Non-abrasive scouring powder can be used on stubborn stains, then rinse with water.
NEVER USE OVEN CLEANER.
INTERIOR OF PLANCHA BOTTOM
Remove residue using brush, scraper and/or cleaning pad then wash with a soapy water solution. Rinse with water and allow dry it.
PLASTIC SURFACES
Wash with a soft cloth and hot soapy water solution. Rinse with water. Do not use abrasive cleaners, degreasers or a concentrated planchet cleaner on plastic parts.
COOKING GRIDDLE
Use a mild soapy water solution. Non-abrasive scouring powder can be used on stubborn stains, then rinse with water.
GREASE CUP
Please do not open the grease cup during use.
Please check the grease cup on time and take away the oil when 1/3 full.
Method: after the grease cup cold, make grease cup up in horizontal line and move it with hook reverse horizontally, this could take out the grease cup.
CLEANING THE BURNER ASSEMBLY
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling griddle.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner. Reinstall the burner, check to ensure that the gas valve orifices are correctly positioned and secured inside the burner inlet (venturi).
In some cases your planchet will light back because of an insect crawling inside the burner venturi or a spider spinning its web inside the burner. This can be rectified by using a bottle brush inserted through the burner venturi and pushing it into the burner over the burner length. If condition persists consult your gas dealer.
SERVICING
Your gas planchet should be serviced annually by a competent registered person.

WARRANTY

The warranty period for our products is 2 years, unless otherwise stated, starting from the date of initial purchase or the date of delivery.
If you have any problems or questions, you can easily access our help pages, troubleshooting tips, FAQ, and user manuals on our service site: https://sav.hkoenig.com.
By typing the reference name of your device in the search bar, you can access all available online support, designed to best meet your needs.
If you still cannot find an answer to your question or problem, then click on “Did the answer solve your problem?”. This will direct you to the Customer Support Request Form, which you can fill out to validate your request and get help.
WARRANTY CONDITIONS
The warranty covers all failures occurring under normal use, in accordance with the usage and specifications in the user’s manual.
This warranty does not apply to packaging or transportation problems during shipment of the product by the owner. It also does not include normal wear and tear of the product, nor maintenance or replacement of consumable parts.
EXCLUSION OF WARRANTY

Accessories and wearing parts (*).
Normal maintenance of the device.
All breakdowns resulting from improper use (poor conditions of use, etc.), insufficient maintenance or misuse of the device, as well as the use of unsuitable accessories.
Damage of external origin: fire, water damage, etc.
Any equipment that has been disassembled, even partially, by persons other than those authorized to do so (notably the user).
The products whose serial number would be missing, deteriorated or illegible that would not allow its identification.
The products subjected to leasing, demonstration, or exhibition.

(*) Some parts of your device, called wear parts or consumables, deteriorate with time and frequency of use of your device. This wear and tear are normal but can be accentuated by poor conditions of use or maintenance of your device. These parts are therefore not covered by the warranty.
The accessories supplied with the device are also excluded from the warranty. They cannot be exchanged or refunded. However, some accessories can be purchased directly through our website: https://sav.hkoenig.com/.
CAUTION :
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adevia SAS / H. Koenig Europe – 8 rue Marc Seguin, 77290 Mistry- Mary, France
www.hkoenig.com
https://en.hkoenig.com
Tél: +33 1 64 67 00 05