HAYLOU X1 Neo True Wireless Earbuds User Manual

: June 12, 2024
: Haylou

Table of Contents

HAYLOU X1 Neo True Wireless Earbuds User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HAYLOU X1 Neo True Wireless Earbuds User Manual

Overview

How to Wear

Gently insert the earbud into the ear canal, adjust the earbud to the most comfortable wearing state.

When calling, adjust Mic towards mouth to gain better talking experience.

How to Charge

For first time use, please remove the isolation film on the charging contacts of both earbduds. Then fully charge the charging case and earbuds.

Plug in the charging cable to charge the earbuds and the charging case at the same time. When the charging case is not fully charged, the LED flashes white slowly. When it is fully charged, the LED flashes solid white.

Power-on

Take the earbuds out from the charging case, they will automatically power on.

Power-off

Put the earbuds back into the charging case, they will automatically power off (LED flashes solid white when the earbuds are charging, then LED goes out when fully charged)
The earbuds power off outside the charging case: they will automatically power off if not connected to the device within 3 minutes (LED flashes solid white for 1s)

How to Pair

Automatic connection: Take two earbuds out from the charging case simultaneously, they will enter pairing state when LEDs on both earbuds flash white quickly.

Open device Bluetooth and search for “Haylou X1 Neo”, then click it to connect. Put the earbuds back into the charging case and repeat the above operation if the connection fails. After the first connection, the earbuds can be automatically connected to the last paired device when powering on (Bluetooth needs to be turned on).

Switch between mono and stereo mode:
It is stereo mode after two earbuds are successfully connected. Put one back into the case to power off, the other will enter mono mode. Or pick it up again to resume stereo mode.

Manual connection:
When LEDs on both earbuds flash white quickly, turn on device Bluetooth to connect.

Functions

Restore Factory Settings

The earbuds are outside the charging case, powered on and not connected to the device;
Quickly click both earbuds for three times at the same time, then press and hold for 3s, they will power off after LEDs flash solid white for 1s;
After resetting, put the earbuds into the charging case and close the lid, then open the lid and take them out again;
Follow the pairing steps to complete Bluetooth connection.

Audio only Outputs from Single Earbud

It’s unusual indeed, please refer to the following operation steps if the situation occurs:

Put the earbuds back into the charging case, and then take them out again to connect.
Refer to the reset steps to reconnect the Bluetooth device.

Other Charging Problems

The white LED goes out when the earbuds are fully charged.
When the charging case is out of power, the earbuds cannot be charged and keep the original connecting status.
LED flashes solid white when the charging case is fully charged.

Package List

Earbuds, charging case, Charging cable, user manual.

Basic Parameters(earbuds)

Operation range: 10m (open space with no obstacle)
Battery capacity: 30mAh(single earbud)
Charging time: approx. 1.5h
Playing time: approx. 5h
Standby time: approx. 60h
Input parameter: 5V 100mA
Battery type: li-ion
Bluetooth version: V5.3

Basic Parameters(charging case)

Input parameter: 5V 500mA
Output parameter: 5V 150mA
Charging time: approx. 2h
Battery capacity: 310mAh
Battery type: li-ion

Caveats

Warning

Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
Keep the indicators away from the eyes of children and animals while using the earphones.
Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
Avoid any contact with liquids.

Note

Please read this user manual carefully before using the product and please properly store it.
When using for the first time, please fully charge this product.
Please charge the product, in case it has not been used over two weeks.
Please use certificated charger.
Do not wear earphones for a long term to protect your hearing.
Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.

Daily maintenance

Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth.

EU DECLARATION OF CONFORMITY
Hereby, Dongguan Liesheng Electronic Co., Ltd. declares that the radio equipment type haylou X1 Neo is in compliance with Directive 2014/53/EU.

Manufacturer: Dongguan Liesheng Electronic Co., Ltd.

Address: Room 401-410, Building 1, No. 86 Hongtu Road, Nancheng District, Dongguan City, Guangdong, China