HAGOR 3318 CPS Menuboard D4P 46 – 65“ Instruction Manual
- June 9, 2024
- HAGOR
Table of Contents
HAGOR 3318 CPS Menuboard D4P 46 – 65“
Caution!
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
INSTALLATION INSTRUCTION
- Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
**SECURE PART FOR TILT ARMS SERIES
**
Art.-Nr.: 3227
Dimensions
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon : +49(0)57 31-7 55 07-0
Mail : info@hagor.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>