Swann 845804 Security Camera System Quick Start Guide

Swann 845804 Security Camera System

Swann Security (Android)

Have a Smartphone or Tablet?

With the Swann Security app, you can turn your mobile device into a monitoring center for your DVR or NVR. Have the peace of mind that you can monitor your home or business at any time from any place. Best of all, it only takes minutes to get it up and running (if you have an iOS mobile device, flip the page for instructions).

To download the app:

1. Go to your app store and search for “Swann Security” or using your mobile device, scan the QR code below.
2. Follow the on-screen instructions to install and accept any license requirements that may appear.
3. After installing Swann Security, locate the app, and tap the icon to run.

You may need to download a QR code reader to your mobile device to scan this QR code.

Attention! Make sure you have completed guides 1 and 2 first.

For instructions on the functions available, access the User Manual within the app. You can also download this manual from our website support.swann.com, and search for – Swann Security Manual.

Registering your Account

Welcome to Swann. Sign in or register

• If you have already registered an account with the app, sign in with your Swann Security credentials, then skip to step 7.
• For new users, tap “Sign Up”.
• Proceed to step 2.

Let’s get started

• Enter your first and last name, email address, and password. The password must be a minimum of six characters and must contain a mixture of numbers and letters (use a password that you can remember). Enter your password again to confirm. For safekeeping, write down your password.
• When finished, tap “NEXT”.
• Proceed to step 3.

Is this where your devices are?

• The app will ask if it can access your de-vice’s location, tap “Confirm” then tap “Al-low only while using the app” (it does this so it can accurately detect the location of your mobile and DVR or NVR).
• The app will detect your address. If the ad-dress isn’t shown, tap the blue icon, input your address, and then tap “DONE”.
• When finished, tap “NEXT”.
• Proceed to step 4.

Confirm your details.

• Your name, email address, and device location will be shown here.
• Tap the “Terms of Service” checkbox, then tap “REGISTER”.
• Proceed to step 5.

Stay secure.

• You will receive an email asking to verify your email address. Go to the email app on your mobile device or computer, open the email, and tap or click the link to verify (if the email hasn’t been received, check your junk or spam folder). Once verified, you will receive a welcome email confirming your registration.
• When finished, tap “DONE”.
• Proceed to step 6.
• You will be taken back to the sign-in page. Upon verification, enter your email address and account password, then tap “SIGN IN”.
• Proceed to step 7.

Pairing your Device

• After sign in, to pair your DVR or NVR to your account, you need to scan the device’s QR code. Check that your DVR or NVR is connected to your router, so it has access to the internet.

• When ready, tap “Pair Device”, then tap “START”.

• Proceed to step 8.

• Tap “SCAN DEVICE QR CODE”. The app will ask if it can take pictures and record video, tap “Allow”.

• Scan the QR code sticker on your DVR or NVR with your mobile device. When the QR code has successfully scanned, proceed to step 9.

• Tap on where the item was purchased.

• Enter a device name for your DVR or NVR, “My DVR” for example, or tap on one of the relevant locations listed.

• When finished, tap “NEXT”.

• Proceed to step 10.

• User Name: The default user name for your DVR or NVR is admin, tap to enter.

• Password: Enter the password created during the Startup Wizard on your DVR or NVR (there is no default password).

• Port number: Leave the default setting (unless instructed to change it by Swann Technical Support).

• When finished, tap “NEXT”.

• Your device is now linked to your Swann Security account – tap “DONE” to finish.

1. Tap to open the Menu. You can edit your account profile, pair a new device, view notifications, read the user manual, and more.
2. Tap to configure settings for the Live View tab. You can hide device tiles and customize the order of device tiles according to your preferences.
3. Tap to toggle the layout of the camera (channel) tiles in the viewing area.
4. Tap to view the camera’s full screen and to display controls such as taking a snapshot, starting a recording, enabling the camera’s microphone, alarm & pan-tilt controls (if supported), and changing the display aspect ratio and stream quality. Turn your mobile de-vice horizontally to view the camera full screen.
5. Tap to access the Notifications screen to view and manage notifications.
6. Tap to access the video activity timeline to search and view events on your DVR or NVR.
7. Tap to enter the Modes tab.
8. Tap to access device & camera settings. From here, you can change the device name, motion settings, siren settings, view technical information about your device, and more.

When viewing a camera full screen (as per instruction 4), use the spread and pinch gestures to zoom in or out. When zoomed in, tap and hold the image to move around within the Live View. This works when holding your mobile device horizontally or vertically.

FAQs

What type of resolution can I expect from the cameras?

The cameras offer 1080p Full HD resolution. This ensures you see details clearly during both daytime and nighttime.

How does the system deter intruders?

Each camera comes equipped with a spotlight that turns on when the camera senses heat and motion, making the system less inviting for potential intruders.

What kind of night vision is available?

The system offers two types of night vision: color night vision up to 32ft when the sensor warning lights are activated, and Black and White night vision up to 100ft.

Is the system weatherproof?

Yes, the cameras have an IP66 rating and are designed to withstand various weather conditions including rain, snow, and dust.

How much storage does the system offer?

he system comes pre-installed with a 1TB HDD, allowing for up to 365 days of stored video with True Detect heat and motion-triggered event-only recordings.

Can I view the camera feed on my mobile device?

Yes, you can see, store, and playback footage from all your Swann Security Cameras on your mobile device via multi-camera live streaming.

What is Smart Search?

Smart Search allows you to select a specific area within the camera’s field of view to search for movement. This can be useful for locating specific events without having to review hours of footage.

Is this system compatible with smart home devices?

Absolutely, you can use your voice to stream live footage via Google Assistant and Amazon Alexa-enabled devices.

How many users can view the camera feed simultaneously?

The system is designed for multiple users to view the feed, but the exact number may vary based on your network capabilities.

What is the warranty on this product?

The Swann 845804 Security Camera System comes with a 1-year limited warranty against factory defects.

Is DIY installation feasible?

Yes, the system is designed for DIY installation with wired protection. All necessary cables and connectors are included in the package.

Can the system be integrated with cloud storage?

You can set up the system to upload footage and still images to your Dropbox account. This provides an added layer of security, as your data will be stored off-site.

Video- Product Information

Download This PDF Link:  Swann 845804 Security Camera System Quick Start Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>