DMP LT-1345 Graphic Touchscreen Keypads User Guide

: June 6, 2024
: DMP

Table of Contents

All/Perimeter System
Touchless Arming
Clean the Keypad
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

GRAPHIC TOUCHSCREEN KEYPADS
Quick Reference Guide

All/Perimeter System

Arm

Press the home screen shield in the center of the keypad.
Select ALL to arm all areas or PERIM to arm only the perimeter.
At ENTER CODE, enter a user code at the keypad or present a credential to the proximity reader.

Disarm

Press the home screen shield in the center of the keypad.
At ENTER CODE, enter a user code at the keypad or present a credential to the proximity reader.

Touchless Arming

Present a credential to the built-in reader to automatically arm the system without touching the keypad. After the arming delay expires, All/Perimeter systems arm All. Home/Sleep/Away and Home/Away systems arm Away. Requires keypad firmware Version 205 and higher.

Home/Sleep/Away System and Home/Away System
Arm

Press the home screen shield in the center of the keypad.
Select HOME to arm the perimeter, select SLEEP to arm everything except the bedroom areas, or select AWAY to arm all areas. The arm sleep option is not available on Home/Away systems.
At entering CODE, enter a user code at the keypad or present a credential to the proximity reader.

Disarm

Press the home screen shield in the center of the keypad.
At entering CODE, enter a user code at the keypad or present a credential to the proximity reader.

Area System
Arm or Disarm

Press the home screen shield in the center of the keypad. Select ARM or DISARM.
At entering CODE, enter a user code at the keypad or present a credential to the proximity reader.
To arm or disarm only selected areas to select NO at ALL? NO YES. To arm or disarm all areas authorized for your user code, select YES.
When you select NO, the display lists each authorized area for your user code followed by NO YES.
· Select NO for each area you do not want to arm or disarm.
· Select YES for each area you want to arm or disarm.

Clean the Keypad

The Clean Keypad Screen option locks the screen for 40 seconds so you can clean it without accidentally pressing buttons.
Use gentle pressure to clean the display, screen, keys, and housing. Use only alcohol sprays or wipes that contain 70% isopropyl alcohol to clean keypad surfaces.
Avoid spraying cleaner directly onto the keypad, oversaturating cleaning cloths, or allowing cleaner to make contact with internal electronic components, cables, or power sources.

In the Carousel Menu, tap Options.
Tap Clean Keypad Screen.
Use an alcohol wipe or spray a small amount of rubbing alcohol onto a clean, dry microfiber cloth to gently wipe down all keypad touch surfaces, removing any excess cleaner.
Wait 10 seconds, then completely dry all keypad surfaces.
If necessary, use a clean, dry microfiber cloth to gently remove streaking.
After the countdown timer expires, the keypad returns to normal operation. To exit the countdown early, press and hold the Shield icon for 2 seconds.