niko P42MR Presence Detector Instructions

May 15, 2024
niko

niko P42MR Presence Detector

Specifications

  • Product: Presence detector 353-601121-2
  • Mounting: SnapFit
  • Power Supply: 230 Vac
  • Installation: Fixed ceiling (9.5 – 40 mm) or suspended ceiling (0.2 – 9 mm)
  • Dimensions: L = 2000 mm, 44 mm x 69 mm x 56.9 mm
  • LED Behavior: Green LED continuous on, Green LED breathing, Green LED flashing, Red LED continuous on, Red LED breathing, Blue LED flashing

Product Usage Instructions

Mounting
Follow the SnapFit mounting instructions provided in the manual for installation.

Wiring
If installing on a fixed ceiling, ensure the wiring is correct. For suspended ceiling installation, follow the wiring scheme accordingly.

App Settings
Adjust the factory settings using the app. Switch ON/OFF settings can be configured. The detector tool can be used for connection status and LED behavior.

Troubleshooting
If the load does not turn on or off, check the wiring scheme. If the app cannot connect to the detector, ensure correct wiring and check ambient light levels.

FAQ

  • Problem: Load does not turn on
    • Possible Cause: The wiring is not correct
    • Proposed Solution: Check the wiring scheme
  • Problem: Load does not turn off
    • Possible Cause: The ambient light is too strong
    • Proposed Solution : Check the response value luminosity and adjust if necessary
  • Problem: App cannot connect to the detector
    • Possible Cause : The switch-off delay is too long or the detector receives false triggers
    • Proposed Solution: Adjust the switch-off delay and remove any objects causing false triggers from the detection range or lower sensitivity

Wiring

Dimensions

Installation

App settings

LED behaviour

Specifications

  • Article number 353-601121-2
  • Configuration 230 V Master
  • Input voltage 230 Vac ± 10 %, 50 Hz
  • Maximum power consumption 0.2 W
  • Circuit breaker maximum MCB rating 16 A*
  • Relay contact NO (max. μ10 A), potential-free
  • Maximum load incandescent and halogen lamps (cosφ = 1) 2300 W
  • Maximum load fluorescent lamps (cosφ ≥ 0.5) 1200 VA
  • Maximum load economy lamps (CFLi) 350 W
  • Maximum load LED lamps 230 V 350 W
  • Maximum load LED driver 500 VA
  • Maximum load electronic transformer 500 VA
  • Maximum capacitive load 140 μF
  • Maximum switching current 165 A/20 ms or 800 A/200 μs
  • Light intensity range 20 – 2000 lux, ∞
  • Number of channels 1 channel
  • Maximum number of secondary detectors 10
  • Switch-off delay pulse, 15 s – 120 min, ∞
  • Hysteresis on light intensity + 10%
  • Detection angle 360°
  • Detection range (PIR) Ø 12 m from a height of 3 m
  • Ambient temperature 25 – +40 °C
  • Mounting method flush mounting with SnapFit mounting bracket
  • Mounting height 2 – 3.5 m
  • Drill diameter 76 mm
  • Minimum flush mounting depth 56.9 mm
  • Colour white (RAL 9010)
  • Dimensions visible (HxWxD) 100 x 100 x 9.5 mm
  • Dimensions (HxWxD) 120 x 120 x 66.4 mm
  • Wire capacity 1.5/2.5 mm²
  • Maximum range Bluetooth® (free field, depending on the device) 50 m
  • Operating frequency 2.4 GHz
  • Maximum radio frequency power -2 dBm
  • Protection degree IP20
  • Impact resistance IK02
  • Modification of settings app (iOS/Android) and 2-way Bluetooth communication
  • Halogen-free yes
  • Marking CE
  • Cable specifications
    • Cable 1 colour black
    • Cable 2 colour white
    • Length 2 m
    • Wire cross-section 1.5 mm²
    • Voltage 250 V
    • Rated current 16 A
    • Halogen-free yes
    • Ambient temperature 5 – + 40°C
    • Type of connector cable 1 male, 3-pole, black
    • Type of connector cable 2 female, 3-pole, white

Troubleshooting

Support & contact

Support & contact

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals