PROGRESS LIGHTING 60347 2-Light Dark Bronze Flush Mount User Manual
- June 4, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING 60347 2-Light Dark Bronze Flush Mount
Before Getting Started
Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- When you have finished assembling the product, place it on a flat surface and make sure it is stable before use.
- Do not let children play with this product.
- DANGER
Risk of suffocation! Keep any packaging materials away from children.
Cleaning & Maintenance
- Keep the product away from direct heat and sunlight.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
- Regular vacuuming or light brushing helps to remove dirt and prevent soil build-up, which increases the appearance wear.
- Periodically (every 90 days) make sure that the screws are fully tighten
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Use a soft clean dry cloth that will not scratch or smudge the surface when cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Electrical Installation
-
FIG. 1 Place the wall switch to the “OFF” position.
Depending on which type of fuse box you have in your home: -
FIG. 2 Place either the main (Master) switch to the “OFF” position, cutting off power to your entire home ; OR turn off the individual switch that provides power to where the fixture will be installed.
-
OR FIG. 3 Place either the main (Master) switch to the “OFF” position, cutting off power to the entire home; OR unscrew the fuse that provides power to where the fixture will be installed.
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
Contents
Before getting started, ensure the package contains the following components:
Assembly
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>