MEARI SNAP 5S Outdoor Security Camera User Guide
- June 6, 2024
- MEARI
Table of Contents
SNAP 5S
ORIGINALITY DESIGN SMART AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Description
| Power Port | DC 5V±10% |
|---|---|
| Power | Press the button for 3 seconds to turn on/off the camera |
| Status light | • Red light solids on: the camera network are abnormal |
• Red light blinks: awaiting WiFi connection, or currently connecting (faster
blinking)
• Blue light solids on: camera running correctly
Microphone| Capture sound for your video
SD card slot| Support local SD Card storage (Max.128G)
Reset| Press and hold on for 5 seconds with a pin to reset the camera
Install
- Fix the bracket on the wall
- Install rubber *NOTE: Remove the rubber before resetting
- Slide the camera slowly into the bracket from the direction of the arrow
- Adjust the camera’s proper angle
Connect
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Android Market, or scan the below QR-Code to
download the App.
Support
|
https://itunes.apple.com/app/id1294635090?mt=8
|
https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
---|---|---
Add device
Log in the Cloudedge, select “Add Device”, and add the smart camera to the APP
according to the screen tips(Make the smart camera close to the router when
configuring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App.
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold is
set to a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold, the App will have a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Daytime & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC Statement:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.