Shenzhen Xu Hui Weiye Electronic Technology X416 3 in 1 Wireless charger User Manual
- June 6, 2024
- Shenzhen Xu Hui Weiye Electronic Technology
Table of Contents
Shenzhen Xu Hui Weiye Electronic Technology X416 3 in 1 Wireless charger
User Manual
Product Overview
Specifications
| Name | 3 in 1 Wireless Charger |
|---|---|
| Using Type | Foldable |
| Material | Environmental protection plastic + 2.5D glass |
| Colour | Black. Gray |
| Charging Port | Type-C |
| Input Current | ?…-9V-2A, 5V-3A |
| Phone Output | 15W/10W/7.5W/5W |
| Watch Output | 2.5W |
| Headphone Output | 3W |
| Adapter | >9V-2A, 5A-3A |
| Size | 160X69X18.6mm |
| Compatibility | Support Qi standard mobile phones, Bluetooth headsets, Apple |
Watch
Product List| Wireless charger x1, charging cable xl, manual xl
/| | /
Operation
-
When charging other devices wirelessly, firstly power the wireless charger. Please connect the Type-C interface of our charger with the suitable adapter by the provided charging cable.
-
When charging the mobile phone, place the mobile phone in the charging area of the mobile phone flattly. It will start charging with fast reaction only after 0.1s. When fully charged or you need to terminate the charging, just take off the mobile phone.
-
When charging the Apple Watch, place the watch in the charging area of the watch flattly. It will start charging with fast reaction only after 0.1s. When fully charged or you need to terminate the charging, just take off the watch.
-
When charging the Bluetooth headset, open the charging panel as showed on below photo, then place the headset in the charging area of the headset flattly. It will start charging with fast reaction only after 0.1s. When fully charged or you need to terminate the charging, just take off the headset.
Precautions
- It is forbidden to immerse the product in water to avoid short circuit of the internal circuit.
- It is forbidden to disassemble or beat the product by yourself to avoid damage to the product.
- Please place the product away from flammable and explosive liquids, gases or explosives.
- Please place the product in a place that is not easily accessible to children. Children are prohibited from using it to avoid unnecessary accidents.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure : A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>