eufy T2181 Robot Vacuum Cleaner User Guide
- October 27, 2023
- Eufy
Table of Contents
eufy T2181 Robot Vacuum Cleaner
Vacuuming
Remove the foam blocks beside the bumper before use.
If you cannot remove the objects surrounding the auto empty station, check
whether Roove can return without assistance; if not, contact deify Customer
Service for help.
- Always keep the auto empty station plugged in, otherwise Roove will not automatically return.
- When the auto empty station is connected to AC power, the LED on the auto empty station is solid blue.
Fully charge Roove before use. The LED on Roove will pulse blue while
charging, and will be solid blue when fully charged.
Download the Dufy Home app and follow the in-app instructions to complete the
Wi-Fi connection. You will then be able to control Roove via this app. Refer
to the “Use Your Roove with the Dufy Home App” section in the Owner’s Manual
for details.
Mopping
- Before emptying the dust box, make sure the mopping module has been removed.
- Attach the waterproof pad to the charging base. Wet the cloth before mopping.
Cleaning and Maintenance
Make sure the
left side brush marked with an L (Left) and the right side brush marked with
an R (right) are installed correctly.
Important Tips
When using for the first time, follow Roove to observe and resolve any
problems that may occur.
- Remove power cords and small objects from the floor that may entangle Robot Vac.
- Fold tasseled edges of rugs underneath to prevent tangling Robot Vac. Avoid cleaning dark-colored high-pile rugs or rugs thicker than 1.02 in / 26 mm as they may cause RoboVac to malfunction.
- It is strongly recommended to set a No-Go zone or a virtual boundary in the Dufy Home app in front of fireplaces and certain areas (i.e. air vents) that may cause damage to Roove if entered.
- Keep Robot Vic away from wet areas during cleaning.
- Robot Vic may climb on top of objects less than 0.79 in / 20 mm in height. Remove these objects if possible.
- Anti-drop sensors will prevent Robot Vac from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted / reflective / dark-colored floors. It is recommended to place physical barriers or set a No-Go zone / a virtual boundary in the Dufy Home app to block off areas where Robot Vic may fall.