bioby BB501 MULTI FUNCTION ELECTRIC SWING User Manual

bioby BB501 MULTI FUNCTION ELECTRIC SWING

Product Introduction

Product Specification:

Product Features:

1. .Soft fabric brings safe and comfort feeling.
2. Protecting baby’s spine design on the basis of human engineering.
3. Contorlled by touching screen or remote controller, easy to operate.
4. With built-in soft songs&Bluetooth enabled for music.
5. With broadening seat, removeable seat cover, mosquito netting.

Parts Instruction

Parts List

1. .Toys*2
2. Pillow• 1
3. Mosquito Net*l
4. Seat Cover* 1
5. Remote• 1
6. Adapter 1 USB Cable 1
7. SeatFrame*l
8. Seat Base* 1

Installation

Assemble/disassemble base stand
Assemble:

1. Remove the plastic locked buckle from the base stand
2. Put the seat frame in the base with· O · shape components aligned
3. Disassemble:Press the button and pull up the seat frame from the base (stand back side of the swing)

To unfold the seat frame

1. .Press both buttons of left and right side, lift up the upper tube in the meantime
2. Press both buttons of left and right side, lift up the nether tube in the meantime

Adjust the backrest

1. .Press button CD at the same time on the left and right side to adjust the recline of backrest.There are Level 0 & l & 2
2. Press button® at the same time on the left and right side to adjust horizontal position of the baby swing.There are Level 0 & l

For Canopy With Toys
Installation: Attach the toys on canopy and fasten the clasps to the pipe of the seat frame, and attach mosquito net to the bottom of the seat frame. Dismantling: Put out of the clasps to remove the canopy.

Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover up. Adjust the seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the baby swing for the safety of your child. Buckle off when you take your baby out of swing.

Button Description

1. Power button: Plug in and the indicator light is on.
   Press the button to turn the swing off.

2. Touch the button to play the built-in music. Touch it again to turn the sound off.

   • Turn on the bluetooth on smart phone and connect with “BT_BABY”. The swing beeps, and then bluetooth is now connected well. Then the music from phone plays.
   • Music priority: Bluetooth>Built-in music

3. Touch the button to make swing settings. There are five swing gears indicated by the lights.

4. Touch the button to set the time. The first touch will have the swing chair swing for 8 minutes, the second touch will have it swing for 15 minutes, and the third will have it swing for 30 minutes.

5. Touch the button to play the next song.

6. Touch the button to increase the volume gradually.

7. Touch the button to decrease the volume gradually.

Lock/Unlock
Lock/Unlock:
l. Press down the button will stop swinging. 2. Boost up the button to unlock

Remote Control

• Power on/off
• Time setting
• Built-in music/ Bluetooth music
• Volume up
• G Play/pause
• Previous song
• Next song
• Volume down
• (D Ci) G) G) @ Five swing gears
• Sleep mode: press to enter sleep mode/gear 2 with timer 15 minutes
• Stop swing: press to stop swing, and press any gear key to resume swing.

Power Supply

1. DC plug can be inserted into l00-240V ~ 50 / 60Hz AC powe supply.
2. Adapter output parameters: voltage is 5V and current is lA.

WARNING

• The power terminals must not be short-circuited.
• Do not use adapters other than those supplied with this product to power the product.
• Keep children away from working adapter.
• Check the adapter cable connection regularly.

WARNING

1. Never leave the child unattended.
2. Do not use this product onre your child can sit up unaided or weighs more than 9 kg.
3. This product is not intended for prolonged periods of sleeping.
4. Never use this product on an elevated sum (e.g. a 1able).
5. :ways use the restraint system.
6. To avoid injury ensure that children are kept cJ.NaY when unfolding and folding this product.
7. Do not let children play with this product.
8. Do not move or lift this product with the baby inside it
9. This product does not replace an oot or a bed. Should your child need to sleep, then It should be placed in a suitable oot or bed.
10. Do not use the product if any components are broken or missing.
11. Do not use accessories or replacement parts other than those approved by the manufacturer.

FALL and STRANGULATION HAZARDS:infants have suffered head injuries Falling from swings and have strangled in straps

• ALWAYS use restraints. Adjust to frt snugly.
• STOP using the product when infant attempts to dimb out(approximately 9 months)
• Stay near and watd1 the infant during use. This product is not safe for unsupervised use or unattended sleep.

SUFFOCATION HAZARDS: Young infants have limited head and neck control. If the seat is too upright, the infant’s head can drop forward and compress the airway. ALWAYS keep swing seat ful ly reclined until infant is at least 4 months old AND can hold up head without help.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

( 1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Cautions: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>