eufy SoloCam S220 Solar Powered Camera User Manual
- May 15, 2024
- Eufy
Table of Contents
QUICK START GUIDE
S220 SoloCam
PRODUCT OVERVIEW
1 Solar Panel
2 Photosensitive Sensor
3 Microphone
4 Camera Lens
5 LED Indicator| 6 Motion Sensor
7 Speaker
8 SYNC Button
9 USB-C Charging Port
10 Mounting Hole
---|---
CHARGING SOLOCAM
LED Indicator
Charging | Solid Blue |
---|---|
Fully Charged | Off |
SETTING UP SOLOCAM
Download the App and Set Up the Device
- Download and install the eufy Security app, and sign up for an account.
- Follow the on-screen instructions to add your SoloCam.
MOUNTING SOLOCAM
Select a Location
S220 SoloCam can be mounted on a wall. Select a location where it achieves the
desired view. We recommend mounting it 7-10 ft (2-3 m) above ground level.
To maximize the solar panel efficiency, select a location where S220 SoloCam
receives plenty of sunlight.
Mount S220 SoloCam
S220 SoloCam can be mounted both indoors and outdoors.
- Loosen the cover of the mount by turning it counterclockwise and disassemble the mount.
- This step applies if mounting onto hard surfaces such as brick or concrete. For soft surfaces such as wood, skip this step. Drill holes with a 15/64 in (6 mm) drill bit, then insert the anchors into the holes.
- Firmly screw the base of the mount onto the wall. Reassemble the mount.
- Screw SoloCam onto the mount. Ensure the solar panel is facing the sky. Position SoloCam to achieve the desired view, checking it using the live stream in the eufy Security app.
For troubleshooting, check the Help section in the eufy Security app.
| 12-month limited warranty
---|---
| (US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
() +86 400 0550 036
() +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 42428633
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
SAFETY
The recommended temperature range for devices and accessories is -20°C to 50°C
(-4°F – 122°F).
Unless specifically indicated that it is safe to do so in the user guide or
instruction manual, do not use this device in an environment that exceeds the
recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user guide or
instruction manual, avoid exposing your device to direct sunshine or
excessively wet environments.
It is recommended to supply the device in an environment with a temperature
that ranges from 5°C ~ 25°C.
When supplying, please place the device in an environment that has a normal
room temperature and good ventilation.
CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED.
DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.
Warning:
- Replacing a battery with an incorrect type may bypass safeguards and create danger;
- Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
- Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
- A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV
technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure condition. The min separation
distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Declaration of Conformity
** This product complies with the radio interference requirements of the
European Community.
This product complies with the radio interference requirements of the European
Community.
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site:
https://uk.eufylife.com/.
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and human body.
Wi-Fi Operating Frequency Range: 2412~2472MHz;
Wi-Fi Max Output Power:19.65 dBm
The following importer is the responsible party (contact for EU matters only)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
This product complies with the radio interference requirements of the United
Kingdom
Hereby, Anker Innovations Limited declares that this product is in compliance
with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK
declaration of conformity is available at the following internet address:
https://uk.eufylife.com.
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
** Your product is designed and manufactured with high-quality materials
and components, which can be recycled and reused.
**** This symbol means the product must not be discarded as household waste
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment.
For more information on the disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this
product.
Anker Innovations Limited. All rights reserved. eufy Security and eufy
Security Logo are trademarks of Anker Innovations Limited, registered in the
United States and other countries. All other trademarks are the property of
their respective owners.
51005003795 V01