eufy S350 Indoor Camera User Guide
- May 15, 2024
- Eufy
Table of Contents
- eufy S350 Indoor Camera
- Specifications
- AT A GLANCE
- WHAT’S INCLUDED
- SETTING UP THE SYSTEM
- LED LIGHT GUIDE
- INSTALLING YOUR CAMERA
- Camera Field of View
- On the Wall
- Install on a Wall or Ceiling
- SAFETY
- FCC Statement
- CUSTOMER SERVICE
- WHAT’S INCLUDED
- SETTING UP THE SYSTEM
- INSTALLING YOUR CAMERA
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
eufy S350 Indoor Camera
Specifications
- Model: I ndoor Cam S350
- Wide-Angle Lens
- Telephoto Lens
- Speaker
- Microphone
- microSD Slot (Supports up to 128 GB, Class 10)
- Power Input
AT A GLANCE
-
Wide-Angle Lens
-
Telephoto Lens
-
Microphone
-
microSD Slot
Insert a microSD card (not included) to store recordings -
Status LED
-
Speaker
-
SYNC Button
-
Power Input
Use at least a Class 10 microSD card with a maximum of 128 GB.
WHAT’S INCLUDED
SETTING UP THE SYSTEM
- Download and install the eufy Security app, and sign up for an account.
- Connect the camera to a power source and wait until the status LED turns solid blue.
- Tap + in the app and follow the in-app instructions to add your camera.
LED LIGHT GUIDE
INSTALLING YOUR CAMERA
- Telephoto Lens Focusing Distance
- To ensure an optimal zoom experience from the telephoto lens, place the camera at least 8 ft (2.5 m) away from the area to be monitored.
Choose a Location
The camera can be placed on a table or shelf, or can be installed on a wall or
ceiling. Select a location and height that achieves your desired view and is
within reach of a power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any objects or walls
to avoid infrared reflection, which may impact night vision performance.
Camera Field of View
On a Table or Shelf
On the Wall
On the Ceiling
Install on a Wall or Ceiling
Note: Disconnect the camera from the power outlet before mounting.
-
Mark the screw positions on the wall or ceiling with the positioning sticker and drill a pilot hole.
-
Hold the mounting plate on the wall and make sure the “UP” arrow is pointing up. Secure the mounting plate to the wall or ceiling with the screws.
On the Wall -
On the Ceiling
-
Keep the camera disconnected from power. Connect the USB-C Cable to the camera with the other end not connected to a power source.
-
Slide the camera onto the mounting plate and make sure it is attached securely.
On the Wall
On the Ceiling
SAFETY
- The recommended temperature range for devices and accessories is 0°C to 40°C (32°F to 104°F) .
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
- For pluggable equipment, the socket outlet shall be easily accessible.
- Use only the adapter provided by the manufacturer. Using unauthorized adapters may cause danger and violate the authorized use of the device or the warranty article.
CHILD SAFETY
- THIS DEVICE IS NOT A TOY.
- Choking Hazard: The product contains (or comes with) small parts, plastic elements, cables, and parts that may cause choking hazards. Keep your camera and its accessories out of the reach of small children. Consult a physician immediately if small parts are swallowed.
- Strangulation Hazard: Children get strangled in cords. Keep cords out of the reach of children (more than 3ft/0.9m away).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used by the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure conditions. The min separation
distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations. The following importer is the
responsible party.
- Company Name: POWER MOBILE LIFE, LLC
- Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements. Lors de l’utilisation du produit,
maintenez une distance de 20 cm du corps afin de vous conformer aux exigences
en matière d’exposition RF.
Declaration of Conformity
This product complies with the radio interference requirements of the European
Community.
Hereby, Anker Innovations Limited declares that this device complies with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site:
https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3,80807 Munich,
Germany
This product is designed and manufactured with high-quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
CUSTOMER SERVICE
- 12-month limited warranty
- (US) +1 800-988-7973
- (UK) +44 (0) 1604 936200
- (DE) +49 (0) 69 9579 7960
- ( ?? ) +86 400 0550 036
- ( ?? ) +81 03 4455 7823
- (AU) +61 3 8331 4800
- (Egypt) +20 8000000826
- (UAE) +971 8000320817
- (Kuwait) +965 22069086
- (Saudi Arabia) +966 8008500030
- (Middle East & Africa) +971 520750842 support@eufy.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
eufy Security Indoor Cam S350
User Guide (T8416)
AT A GLANCE
①
| Wide-Angle LensL|
⑤
| Status LED
---|---|---|---
②| Telephoto Lens| ⑥| Speaker
③| Microphone| ⑦| SYNC Button
④
| microSD Slot
Insert a microSD card*
(not included) to store recordings
|
⑧
|
Power Input
Use at least a Class 10 microSD card with a maximum of 128 GB.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder
SETTING UP THE SYSTEM
- Download and install the eufy Security app, and sign up for an account.
- Connect the camera to a power source and wait until the status LED turns solid blue.
- Tap + in the app and follow the in-app instructions to add your camera.
LED Light
INSTALLING YOUR CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the telephoto lens, place the camera
at least 8 ft (2.5 m) away from the area to be monitored.
Choose a Location
The camera can be placed on a table or shelf, or can be installed on a wall or
ceiling. Select a location and height that achieves your desired view and is
within reach of a power outlet.
Note : Keep the camera at least 0.7ft/0.2m away from any objects or walls
to avoid infrared reflection, which may impact night vision performance
Camera Field of View
On a Table or Shelf
On the Wall
Install on a Wall or Ceiling
Note: Disconnect the camera from the power outlet before mounting
-
Mark the screw positions on the wall or ceiling with the positioning sticker and drill a pilot hole.
-
Hold the mounting plate on the wall and make sure the “UP” arrow is pointing up. Secure the mounting plate to the wall or ceiling with the screws.
On the Wall On the Ceiling -
Keep the camera disconnected from power. Connect the USB-C Cable to the camera with the other end not connected to a power source.
-
If mounting on a wall, place the cable into the cable channel of the mounting plate.
Skip this step for ceiling installation -
Slide the camera onto the mounting plate and make sure it is attached securely.
On the Wall On the Ceiling
FAQ
Frequently Asked Questions
- Q: What microSD card should I use with the Indoor Cam S350?
- A: Use at least a Class 10 microSD card with a maximum capacity of 128 GB for storing recordings.
- Q: What do the different LED light colors indicate?
- A: Solid Violet indicates system initialization, Solid Blue means normal operation or readiness for setup, Blinking Red implies no internet connection, Solid Red signifies recording or live streaming, and Flashing Blue and Red shows firmware upgrades in progress.