E-YOOSO Z-94J Mechanical Keyboard User Manual

E-YOOSO Z-94J Mechanical Keyboard User Manual

PRODUCT INSTALLATION

Plug & Play, USB interface, No need driver and software.

PRODUCTS FEATURE

1. Ergonomic design.
2. High quality button switches.
3. System Support Windows/Mac,

LED LIGHTING MODES

Support 20 backlit modes:

Backlit mode switching.

Brightness adjustment. After adjusting to an ultimate level, NUM,CAP two indicators will flicker for 3 times with 5 grades adjustable.

Backlit running speed adjustment: After adjusting to an ultimate level. NUM. CAP two indicators will flicker for 3 times with 5 grades adjustable.

Light swicthing: Red, Green, Blue, Yellow, Pink, Cyan, White, RGB (supporting for 16 types

CUSTOM KEY SETTINGS OF LIGHTING MODES FN

Light recording

Press FN+Backspace to enter light self-defining mode, and the light will be on by pressing ESC, A, S, D, W. ↑, or key by default. Press FN+Backspace again to enter recording state. NUM.CAP two indicators will flicker continuously (and it will be off after recording is over). Press the same key continuously to the designated color, and go on setting other keys to form the needed backlight pattern. After the setting is completed, press FN+Backspace again to save it. When a light macro is played, press FN+Backspace, the light of the defined key will be normally on for indication (FN key cannot self define the light).

WIRED/2.4G/BT SWITCHING

Switch via the left switch on the keyboard. OFF is wired mode (M indicator: white), BT is Bluetooth mode (M indicator light blue/cyan/pink), 2.4G is 2.4G mode (M indicator light yellow)

. BLUETOOTH/2.4G PAIRING MODE

1. Bluetooth: Press and hold FN+1/! 2@/3# for 3 seconds to enter pairing mode of the corresponding Bluetooth channel. The corresponding blue/cyan/pink light of the M indicator will flash, reminding of entering the pairing status. After pairing is successful, the indicator light will be normally on.
2.  2.4G: Press and hold FN+4$ for 3 seconds to enter 2.4G code matching mode. The M indicator light will flash in yellow, and then connect the receiver to the computer. After code matching is successful, the M indicator light will be normally on in yellow.

MODE STATUS BT/2,4G SELECTION

Press FN+11/2@/3#/4$ to switch amongst BT1/BT2/BT3/2.4G status of the keyboard. L

OW VOLTAGE INDICATION

1. When the battery voltage is lower than 3.3V, the light effect will be disabled, and the M indicator light will slowly flash in red when there is a button action,
2. When the battery voltage is equal to or lower than 3.0V, the keyboard function will be disabled,

AUTOMATIC POWER SAVING

When the keyboard has no operation for 1 minute, the backlight will be off and it will enter standby mode, and when the keyboard has no operation for 30 minutes, it will enter sleep mode.

CHARGING INDICATION

When the TYPE-C USB cable is connected to the computer or power adapter, the keyboard will be in the charging status, and the M indicator light will be normally on in red during charging, and the red light will be off when charging is completed, displaying the color of the current mode indicator.

POWER DISPLAY FUNCTION

Press FN+Alt keys, the entire backlight will be off, the battery level will be displayed in the letter area from 1! to 0). When the battery level is low, keys 11-3# will be displayed in red; for the battery level above 3 #, 11-0) will be displayed in green. When they are released, the default light effect will be restored

TURN ON/OFF BACKLIGHT

to turn on/off the keyboard backlight.

WHITE LIGHT TEST FUNCTIO

to test full-key white light and press again to restore the original light effect. It is for testing purposes only.

ARROW KEYS TOGGLE FUNCTION

to key lock W, A, S, D interchanges with four arrow keys, repeat return.

SUPPORT WIN LOCK FUNCTION FN

 Win to lock the WIN key, repeak to unlock(No WIN-lock function for MAC). EN

FN COMPOSITE FUNCTION(WIN

Media Play
Volume +
 Prev Track
 Play/Pause
 E-mail
 Computer

 Volume-
 Mute
 Next Track
 Stop
 Home
Calculator

FN COMPOSITE FUNCTION(MAC)

 Brightness of screen-
 Display multi- task window
 App
 Prev Track
 Next Track
 Volume-

 Brightness of screen+
 Siri
 Search
 Play/Pause
 Mute
 Volume +

FACTORY RESET

 for 3 seconds to recover to the default setting, and clear all the macro settings.

SWITCHING OF WIN AND MAC SYSTEMS

WIN and MAC systems can be switched via the left switch on the keyboard.

WARRANTY

1. Warranty Period: 12 months from purchase.
2. If the products have any qualified problems, Please Contact Us, We Will Solve the Problem for you ASAP.
   Service Email: Eyoososervice@163.com

PACKAGE CONTENT

• Mechanical Keyboard x1
• User Manual x1

BATTERY SAFETY GUIDELINES

DO NOT replace the battery with a different model
DO NOT use this product if the battery shows signs of damage including but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
DO NOT touch the battery fi material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes
DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating condition,
DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
DO NOT impact, bend, alter, dissemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful

CAUTION: Failing to follow all safety guidelines may result product damage, explosion, fire, and/or electric shock

FCC WARNING STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules, Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>