Schneider Electric CCT90501 Load Compensation Module LED Instructions
- June 6, 2024
- Schneider Electric
Table of Contents
Product End of Life Instructions
Load Compensation Module LED
End of Life Instructions
Recommendation| Number on drawing| Component /
Material| Weight (in g)| Comment
---|---|---|---|---
To be dismantled| 1| Plastic parts| 5|
To be depolluted| 2| Electronic Board (Power) > 10cm²| 6.09|
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
|---|---|
| Brand name | Schneider Electric |
| Product function | The Load Compensation Module LED is used to |
improve the dimming behavior of LED loads/lamps in combination with dimmers in
trailing edge mode.
Product reference| CCT90501
Total representative product mass| 11 g
Representative product dimensions| 12mm x 43mmx 29mm
Date of information release| 03/2021
Additional information
Legal information| This product family is in the scope of European
Union directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE). The product family must be disposed of according to the legislation of
the country. This document is intended for use by end-of-life recyclers or
treatment facilities. It provides the basic information to assure an
appropriate end-of-life treatment for the components and materials of the
product.
---|---
Recyclability potential| 68%| Based on “ECO’DEEE recyclability
and recoverability calculation method” (version V1, 20 Sep. 2008 presented to
the French Agency for Environment and Energy Management: ADEME).
Schneider Electric Industries SAS
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVEOLI2102017_V1
Published by Schneider Electric
© 2019 – Schneider Electric – All rights reserved