Omni OPR01 Pet Fountain User Manual

Omni OPR01 Pet Fountain

Product Information

The Pet Fountain is a WiFi-enabled device that provides a continuous supply of fresh water for your pets. It has a maximum capacity of 2.1L and is made of ABS+PC material. The productdimensions are 239.8×239.8×246.2 mm and it weighs 1kg. The Pet Fountain comes with a charging line, user manual, two filters, and an indicator light.

Functional Specifications

• WIFI: 2.4G Wifi
• Power supply: 5V/1A

Tips

1. It is recommended to replace the filter every 15 days.
2. It is recommended to replace the water pump filter sponge every 15 days.
3. It is recommended to clean the water tank every 7 days.
4. When cleaning the water tank, do not soak it in water.

Product Usage Instructions

Pet Fountain Assembly

1. Thread the acrylic outlet pipe through the silicone hose. Ensure that the hole in the transparent acrylic outlet pipe aligns with the silicone hose.
2. Place the filter element into the filter box and cover it with the top cover.
3. Thread the outlet pipe through the top cover, making sure toalign the raised tabs.
4. Connect the silicone pipe to the water outlet pipe and then to the water pump.
5. Close the top cover and rotate the arrow to the lock sign.
6. Install the silicone cap first, and then connect the water outlet ball. Ensure that the water outlet faces inward.

For a visual guide on product assembly, please scan the QR code provided in the user manual to watch the installation  video.

APP Operation Instructions

Pet Water Fountain

1. Install the app by scanning the QR code provided above or by searching “Pet Fountain” in the App store (for iOS) or Google Play (for Android).
2. Sign in to the app using your email and obtain the verification code.
3. Read and accept the User Agreement and Privacy Policy.
4. Set your password and complete the registration process.

Add Device

Note: Make sure your Pet Fountain is connected to a power source and within range of your WiFi network.

1. In the app, click on “Add Device”.
2. You can add the device in three ways:
   • Scan the QR code on the device.
   • Enter the device number manually.
   • Search for nearby devices to add.

Alarm Notification

To set up alarm notifications, go to the device list in the app and click on the desired device to see more details. From there, you can enter the setting page and configure the alarm message settings.

Effluent Mode and Light Mode Settings

In the setting page, you can choose between two effluent modes: induced effluent and continuous effluent. You can also select from three light modes: monochromatic mode, breathing mode, and gradient mode. The light color can be set to alternate between all RGB colors.

FCC Warning Statement

There is a possibility of interference in certain installations. If this equipment causes harmful interference to radio or television reception, try the following measures to correct it:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different circuit outlet than the receiver.
• Consult the dealer or an experienced radio/TV technician for assistance.

Please read the user manual carefully before using the product

Checking the product is intact or not when you received it. Please check with the list toconfirm that accessories arecomplete.

Functional specifications

Product Parameters

• WIFI: 2.4G Wifi Power supply: 5V/1A
• Maximum Capacity: 2.1L Weight: 1kg
• Material: ABS+PC Size: 239.8×239.8×246.2 mm
• Assembly: Upper and lower cover rotation buckle

Indicator Light

• Power on： Blue light
• A lack of water： The red light is flashing
• Networking success： Green light
• Light Mode： RGB colors alternative
• Connecting the internet： The green light is flashing

Product Diagram

Tips

1. It is recommended to replace the filter every 15 days.
2. It is recommended to replace the water pump filter sponge every 15 days.
3. It is recommended to clean the water tank every 7 days.
4. When cleaning the water tank, do not soak in water

Pet Fountain Assembly

1. Threading the acrylic outlet pipe through the silicone hose.The hole in the transparent acrylicoutlet pipe should line up with thesilicone hose
2. Putting the filter element into the filter box and cover to the top cover
3. Threading the outlet pipe through the top cover, noting the raised alignment of the tabs
4. Firstly, silicone pipe need to connected to the water outlet pipe and then to the water pump
5. Close the top cover and rotate the arrow to the lock sign
6. Install the silicone cap first, and then connect the water outlet ball. Note thatthe water outlet faces inward

Installation Video

Scan the QR code on the left to watch product assembly and product showcase videos

APP operation instruction

Pet water fountain

Install APP

1. Scanning the above QR-code to download the latest vision app.
2. IOS system can download the app through the App store by searching “Pet Fountain＂.
3. Android system can download the app through Google Play by searching “Pet Fountain＂.

Sign in

Add Device

Add device
Three methods to add device：

1. Scanning the QR-code on the device.
2. Enter the device number to add a device.
3. Through searching nearby device to add the device

Set up

FCC

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment hasbeen tested and found to comply with the limits for a  Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed  to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating inconjunction with any other antenna or transmitter.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2)This device must accept any interference received,including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>