Keeson Technology MC132 Control Box Instructions
- June 6, 2024
- Keeson Technology
Table of Contents
Keeson Technology MC132 Control Box Instructions
Electrical configuration diagram
Function Picture
Process of test
HEAD port
Connect to head actuator, control by remote single:
Click head up button on the remote, head actuator moves out, stop when released;
Click head down button, head actuator moves in, stop when released;
This function takes effect only by pressing the corresponding button on the remote.
FOOT port
Connect to foot actuator, control by remote single:
Click foot up button, foot actuator moves out, stop when released;
Click foot down button, foot actuator moves in, stop when released;
This function takes effect only by pressing the corresponding button on the remote.
Lumbar port
Connect to foot actuator, control by remote single:
Click Lumbar up button, foot actuator moves out, stop when released;
Click Lumbar down button, foot actuator moves in, stop when released;
This function takes effect only by pressing the corresponding button on the remote.
Massage
Connect to head massage, control by remote:
Click head massage + button, head massage strengthens by one level;
Click head massage – button, head massage weaken by one level;
This function takes effect only by pressing the corresponding button on the remote.
MULTIFUNCTION port
Connect with the same other Control box or Other accessories;
Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box flashes for 4 times, and then turns off, POWER LED turns on。
Power
Connect to the 29V DC;
Pair Function
Power up control box, pairing LED will be flash, the control box enters into mode of code paring;
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box stop flash, it indicates that the code paring is successful;
FLAT function
Press and release the FLAT button on remote, the head and foot actuators moves to lower position(when the actuator is free, can turn off the vibration motor and turn off the indicator light when press once ),stop when press any button;
This function takes effect only by pressing the corresponding button on the remote.
ZERO G position function
Press and release ZERO G button on remote, the head and foot actuator moves to preset memory position, stop when press any button;
This function takes effect only by pressing the corresponding button on the remote.
FCC Warning
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject
to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>