Baseus SUWX030001 Wireless Car Charger User Manual
- June 13, 2024
- Baseus
Table of Contents
User Manual
SUWX030001 Wireless Car Charger
SUWX030001
Wireless Car Charger
Wireless Charging Car Mount Pro 15W (Air Outlet Version)
Please read this user manual carefully before use and keep for future reference.
Product Specifications
Model No.: BS-CM014
Input: 5V 2A, 9V 2A, 12V 1.67A
Wireless Charging Output: 5W/7.5W/10W/15W
Product Introduction
- Built-in wireless charging coil
- Type-C port
- Clamp arms
- Adjustable bracket
Cautions
- Please use 5V 2A, 9V 2A, 12V 1.67A adapters for this product.
- There must not be any metal objects between the wireless charging area and the phone, for it won’t be working.
- The working temperature of the product is between 0°C and 25°C, otherwise it may aftect the charging efficiency.
- Please install the product onto the air vent gently to avoid damage.
- After long-time use, there might be loosening, please reinforce the mount if this happens.
- The cou pling distance for wireless charging is 6mm, so if the phone case is too thick, it may affect the wireless charging efficiency.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Declaration on hazardous substances and elements contained in electronic products
| Part Descrption | Hazardous substances and elements |
|---|---|
| Lead (pb) | Mercury (Hg) |
| chromium (Cr VI) | Polybrominated |
| Biphenyls (PBB) | Polybrominated |
Biphenyl ethers (PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of harmful substances in at least one homogeneous material
of this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip : The 10-year icon refers to the “effective life of
environmental protection”, not the product quality assurance period.
Electronic products all contain harmful substances such as lead, mercury and
cadmium. Once they are overused, harmful substances may leak or mutate, cause
pollution to the environment, or cause serious damage to people and property.
The term of “environmental protection use” means that all electronic products
will be required to use within this effective period. We will no longer be
responsible for the quality of the products dueto the safety risks that arise
after the safe use period.
It is hereby declared that this product model BS-CM014 of Shenzhen Times
Innovation Technology Co., Ltd., complies with the provisions of Directive
2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of
Conformity can be found on the following website:
www.baseus.com
This equipment complies with the provisions of Directive 2012/19/EU. It is
strictly forbidden to dispose of this equipment with ordinary trash; it must
be recycled. This symbol indicates that the product shall not be treated as
regular domestic trash, and must be delivered to a recycling ME center that is
capable of recycling electronic and electrical equipment.
FCC ID:2A482-CM014
: 4000-712-711:www.baseus.com
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2″ Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/BASEUS 009
Hotline: +86-4000-712-711 Website:www.baseus.com
PB3850Z_POAO
1000055213
Designed by Baseus
Made in China
Documents / Resources
|
Baseus SUWX030001 Wireless Car
Charger
[pdf] User Manual
SUWX030001, B1TPZ, PB3850Z, SUWX030001 Wireless Car Charger, Wireless Car
Charger, Car Charger, Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>