MEARI Flight 5S 1080P Outdoor WiFi Floodlight Camera User Guide
- June 6, 2024
- MEARI
Table of Contents
Flight 5S
ORIGINALITY DESIGN SMART AND BEAUTIFUL
**QUICK GUIDE
**
What’s in the box
Consult the checklist below for all components.
Description
| Power | AC 100~240V |
|---|---|
| Status light |
- Solid red light on: network is malfunctional
- Blinking red light: wait for network connection S
- olid blue light on: camera is working correctly
Microphone| Capture sounds for your video
SD card slot| Support local SD Card storage (Max.128GB)
Reset| Press and hold the ‘RESET’ for 5 seconds to reset the device (if you
have modified settings, they will return to factory defaults)
Light| Turn the light on/off manually or automatically
Installation
Step 1 First turn off the power breaker at your fuse box for your Flight
camera.
Step 2
-
Loosen the screws of and connect the power cable to the terminal. And then tighten the screws of . Make sure that one side of white cable is installed within the bracket, otherwise there will be water leakage.
WARNING
Please confirm that you have turned off your power breaker and then connect terminal with cable. -
Fix the mounting bracket to the wall with bracket screws.
Installation
Step 3
Install the camera into the bracket along the direction of the bracket.
After the camera is installed in the bracket, fix them with screws. *
(Optional) You can adjust the horizontal angle between 0 to 120 degress by
App.
NOTE: When after installing your flight camera, turn on the power
breaker.
Connection
Download
SmartLife or Tuya Smart is available for both iOS and Android OS. Search the
name ‘SmartLife’,’Tuya Smart’ in App Store or Google Play, or scan the QRCode
to download the App.
·Support
https://smartapp.tuya.com/tuyasmart
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
Step 1 Open the Smart Life App, click “Sign Up”, read the “User Agreement
Privacy Policy” and click “Agree” .
Step 2 Input a legal and valid Mobile number or Email address and click “Get Verification Code”. Input the verification code to log in.
QR Code Configuration
-
Open the Smart Life App, click “My” >> “Home Management” >> “Create a home”, and you can customize the home name and related settings .
-
Click “Add Device” or “+”, and then select “Security & Sensor” >> “Smart Camera” to add camera.
-
Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click “Next”. Then input your WiFi’s passwords and click “Next”. Click ” ” to change network.
Note:
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
-
In this interface, you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
-
When connecting, you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click you could also DIY the camera’s name.
Settings
In “Smart Camera” interface,click ,you can set the camera common functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened;Message notification and authority
confirmation in the mobile phone system have been opened.
Function
Lighting Control
You can turn on or off the light, or adjust the brightness by App.
Two-way Audio
You can see vistors and hear the isounds by App, which are captured by the
camera.
PIR
When someone passes by, an alarm will be triggered and sent to your App of
phone. You can turn on the light alarm on App, so that the light will be on
automatically when there is a visitor comes out in the evening.
Record
Using SD card or activating the Cloud-Storage Service to keep recording for
every moment.
Day & Night
You can set up a schedule for lighting so that you can get a clear view in the
evening.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference,and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>