Danby DAR110A1WDD 11 cu. ft. Apartment Size Refrigerator Owner’s Manual

: June 6, 2024
: Danby

Table of Contents

Danby DAR110A1WDD 11 cu. ft. Apartment Size Refrigerator
Important Safety Information
GROUNDING INSTRUCTIONS
OPERATING INSTRUCTIONS
FEATURES
TEMPERATURE SELECTION
DOOR REVERSAL INSTRUCTIONS
CARE & MAINTENANCE
- POWER FAILURE
- DEFROST
TROUBLESHOOTING
Limited In-Home Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Danby DAR110A1WDD 11 cu. ft. Apartment Size Refrigerator

Danby-DAR110A1WDD-11-cu.-ft.-Apartment-Size-
Refrigerator

Welcome to the Danby family.
We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance.
You are entitled to the warranty coverage as described in the owner’s manual provided with your new appliance.

Please write down your appliance information below. You must keep the original proof of purchase receipt to validate and receive warranty services.
Register your product online and receive a FREE 2 MONTH WARRANTY EXTENSION after ﬁ lling out a product survey, at www.danby.com/support/product-registration/

Need Help?

Read your Owner’s Manual for installation help, troubleshooting, and maintenance assistance.
Visit www.Danby.com to access self-service tools, FAQs and much more by searching your model number in the search bar.
For the Quickest Customer Service, please ﬁll out the webform at www.danby.com/support. Your submission will go directly to an expert on your particular appliance. Our average response times are between 20 minutes and 2 hours, during EST business hours.
Call 1-800-263-2629 – please note that during peak hours, hold times can exceed one hour.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY REQUIREMENTS
DANGER: Risk of ﬁ re or explosion. The flammable refrigerant used. Do not puncture refrigerant tubing.

Do not use mechanical devices to defrost the refrigerator.
Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similar qualiﬁ ed person in order to avoid hazard.
Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed.
Dispose of properly in accordance with federal or local regulations.
Follow handling instructions carefully.
Do not store explosive substances such as aerosol cans with a ﬂ flammable propellant in this appliance.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
CAUTION: Children should be supervised to ensure that they do not play with the appliance.
DANGER: Risk of child entrapment. Before throwing away an old appliance:

Remove the door or lid.
Leave shelves in place so that children may not easily climb inside.

DANGER: Do not add a lock to the door or lid. This can cause child entrapment and harm.

SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.
This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, ofﬁces and other working environments;
Farm houses and by clients in hotels, motels and other residential type environments;
Bed and breakfast type environments;
Catering and similar non-retail applications.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.
WARNING – Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualiﬁ ed electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

OPERATING INSTRUCTIONS

LOCATION

Two people should be used when moving the appliance.
Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.
Place the appliance on a ﬂoor that is strong enough to support it when it is fully loaded.
Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance to perform improperly.
Do not use the appliance near water, for example in a wet basement or near a sink.
This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
This appliance is 60.8 cm (24 inches) wide by 149.3 cm (58.8 inches) high by 63 cm (24.8 inches) deep. Make sure that you leave the minimum amount of space between the appliance and all surrounding walls and vents.
Allow 12.7 cm (5 inches) of space between the back, sides and top of the appliance and all adjacent walls.
This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.

FEATURES

Thermostat Dial
Glass Shelves
Crisper
Magnetic Gasket: Tight ﬁ tting door seal keeps all the cooling power locked inside.
Bottle Rack: For tall, small and medium cans or jars.
Leveling Legs: Adjust so the unit is level.

Danby-DAR110A1WDD-11-cu.-ft.-Apartment-Size-
Refrigerator-1

TEMPERATURE SELECTION

The temperature of the appliance can be adjusted by turning the thermostat dial on inner right side of the cabinet.
The number 1 is the warmest setting. Higher numbers indicate colder settings.
The MAX position is the coldest setting.
The “Off” position will turn off the cooling function.
Internal temperature of the appliance can vary based on ambient temperature, the quantity of items stored and how frequently the door is opened.

Danby-DAR110A1WDD-11-cu.-ft.-Apartment-Size-
Refrigerator-2

LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.

Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the chassis.
Slowly turn the leveling leg clockwise until the appliance is level.

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
To change the direction of the door swing, follow the instructions below.

Remove the lower hinge and adjustable foot from the lower right side of the cabinet. Remove the adjustable foot from the lower left side of the cabinet.
Remove the door from the cabinet. Remove the screw hole cover from the top left side of the door and install it on the top right side of the door.
Remove the hinge pin from the top right side of the work top and install it on the top left side of the work top.
Reinstall the door on the cabinet. Install the lower hinge on the bottom left side of the cabinet. Install both adjustable feet.

Note: Ensure that the rubber gasket on the door is making a good seal with the cabinet all the way around before tightening the screws.

CARE & MAINTENANCE

CLEANING
Ensure the appliance is unplugged before cleaning.

To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.
Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.
Clean the outside with a soft, damp cloth and some mild detergent.
It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, take the proper steps to protect your contents.
Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

DEFROST

This appliance is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.

VACATION

Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING

Make sure the appliance is empty.
Secure the shelves with tape.
Secure the door with tape.
Turn the adjustable foot up to the base to avoid damage.
Protect the outside of the appliance with a blanket or similar item.
Be sure the appliance stays in the upright position during transportation.
If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.

DISPOSAL
This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government ofﬁce.